From 4b61751f8e57ebb321551029be3677ebee2e734a Mon Sep 17 00:00:00 2001 From: AllSpiceUser Date: Mon, 18 Dec 2023 18:12:59 +0000 Subject: [PATCH 1/3] Add Logic/serial specifications --- readme.md | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/readme.md b/readme.md index 504b454..9b9f892 100644 --- a/readme.md +++ b/readme.md @@ -7,5 +7,36 @@ Welcome to your new repo. This is your readme.md file. ## You can edit this file and add information and specifications about your project +Specification is in yaml markup + + - Power: + Input_voltage: + Input_current: + Input_wattage: + - Environment: + Max_temp: + Min_temp: + Max_force: + Max_vibe: + + - Processors: + + - Logic: + Logic_voltage_1: 5.0 V + Logic_voltage_2: 3.3 V + - Communication: + Programming_UART_RS232: + Mode: UART_MODE_TX_RX + Baud_rate: 9600 + Parity_bit: UART_PARITY_NONE + Word_length: UART_WORDLENGTH_8B + Data_bits_size: 1 + Stop_bits_size: UART_STOPBITS_1 + Flow_control: UART_HW_CONTROL_NONE + + SPI (4.5 MHz): + + + - [ ] 1 pA accuracy - [ ] weight < 2.5 kg -- 2.45.2 From c7d8041aa638d0646000576fef52b4ff86f9d151 Mon Sep 17 00:00:00 2001 From: AllSpiceUser Date: Mon, 18 Dec 2023 18:13:56 +0000 Subject: [PATCH 2/3] Add codeblock --- readme.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/readme.md b/readme.md index 9b9f892..0cb6e67 100644 --- a/readme.md +++ b/readme.md @@ -8,7 +8,7 @@ Welcome to your new repo. This is your readme.md file. ## You can edit this file and add information and specifications about your project Specification is in yaml markup - +``` - Power: Input_voltage: Input_current: @@ -40,3 +40,4 @@ Specification is in yaml markup - [ ] 1 pA accuracy - [ ] weight < 2.5 kg +``` \ No newline at end of file -- 2.45.2 From 29f6d9bc8c6c53edeabe57fab4204274c7c139f1 Mon Sep 17 00:00:00 2001 From: AllSpiceUser Date: Mon, 12 Feb 2024 17:23:19 +0000 Subject: [PATCH 3/3] Add more specs to example --- readme.md | 133 ++++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 99 insertions(+), 34 deletions(-) diff --git a/readme.md b/readme.md index 0cb6e67..cdb3bb4 100644 --- a/readme.md +++ b/readme.md @@ -1,43 +1,108 @@ ![new repo](./images/new_repo.png) -# Welcome +# Project Title: [Your Project Name] + +## Welcome Welcome to your new repo. This is your readme.md file. -## You can edit this file and add information and specifications about your project - -Specification is in yaml markup -``` - - Power: - Input_voltage: - Input_current: - Input_wattage: - - Environment: - Max_temp: - Min_temp: - Max_force: - Max_vibe: - - - Processors: - - - Logic: - Logic_voltage_1: 5.0 V - Logic_voltage_2: 3.3 V - - Communication: - Programming_UART_RS232: - Mode: UART_MODE_TX_RX - Baud_rate: 9600 - Parity_bit: UART_PARITY_NONE - Word_length: UART_WORDLENGTH_8B - Data_bits_size: 1 - Stop_bits_size: UART_STOPBITS_1 - Flow_control: UART_HW_CONTROL_NONE - - SPI (4.5 MHz): +### You can edit this file and add information and specifications about your project +## Overview +Brief description of the project, its purpose, and its intended use. + +## Table of Contents +- [Overview](#overview) +- [Electrical Specifications](#electrical-specifications) + - [Power Requirements](#power-requirements) + - [Signal Requirements](#signal-requirements) + - [Connectivity](#connectivity) +- [Components](#components) + - [Active Components](#active-components) + - [Passive Components](#passive-components) + - [Connectors and Interfaces](#connectors-and-interfaces) +- [PCB Specifications](#pcb-specifications) + - [Layers](#layers) + - [Material](#material) + - [Dimensions](#dimensions) + - [Surface Finish](#surface-finish) +- [Schematic Diagram](#schematic-diagram) +- [PCB Layout](#pcb-layout) +- [Assembly Notes](#assembly-notes) +- [Testing and Validation](#testing-and-validation) +- [Safety and Compliance](#safety-and-compliance) +- [Revision History](#revision-history) +- [Appendix](#appendix) + +## Electrical Specifications + +### Power Requirements +- Input Voltage: [Specify range, e.g., 3.3V - 5V] +- Power Consumption: [Specify typical and maximum, e.g., 500mW typical, 1W max] +- Power Supply: [Details about the power supply, e.g., USB, external adapter] + +### Signal Requirements +- Signal Types: [Digital, Analog, Mixed] +- Frequency Range: [Specify range, e.g., DC - 5MHz] +- Signal Integrity Considerations: [Impedance matching, noise reduction techniques] + +### Connectivity +- Wireless: [Wi-Fi, Bluetooth, etc., including standards and frequencies] +- Wired: [USB, Ethernet, etc., including versions and data rates] + +## Components + +### Active Components +- Microcontrollers: [Part number, manufacturer] +- Sensors: [Type, part number, manufacturer] +- Other ICs: [Function, part number, manufacturer] + +### Passive Components +- Resistors: [Value, tolerance, power rating] +- Capacitors: [Value, voltage rating, tolerance] +- Inductors: [Value, tolerance, Q factor] + +### Connectors and Interfaces +- Board-to-Board: [Type, pitch, manufacturer] +- External Interfaces: [Type, standard, manufacturer] + +## PCB Specifications + +### Layers +- Number of Layers: [e.g., 2-layer, 4-layer] +- Stack-up: [Detail the layer structure] + +### Material +- Substrate: [FR-4, Aluminum, etc.] +- Thickness: [Specify in mm or mils] + +### Dimensions +- Size: [Length x Width, in mm or inches] +- Shape: [Rectangular, custom shape] + +### Surface Finish +- Type: [HASL, ENIG, OSP, etc.] + +## Schematic Diagram +Link or embed the schematic diagram of the PCB here. + +## PCB Layout +Details about the PCB layout, including critical trace routing, component placement, and any heat dissipation considerations. + +## Assembly Notes +Special instructions for assembling the PCB, including soldering temperature profiles, handling sensitive components, and any required inspections. + +## Testing and Validation +Describe the testing procedures and equipment used to validate the functionality and performance of the PCBA. + +## Safety and Compliance +List the safety standards and compliance marks relevant to the project, such as CE, FCC, UL, etc. + +## Revision History +Document the revision history of the specifications, including date, description of changes, and author. + +## Appendix +Include any additional information, such as datasheets, reference documents, or design files. - - [ ] 1 pA accuracy - - [ ] weight < 2.5 kg -``` \ No newline at end of file -- 2.45.2