Hw/aleksa/fpga module rev2 #241
Note: AllSpice cannot diff pdf files. Rendering head (latest) version below.
Binary file not shown.
@ -0,0 +1,111 @@
|
||||
Protel Design System Design Rule Check
|
||||
PCB File : C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc
|
||||
Date : 2022-11-10
|
||||
Time : 1:52:28 AM
|
||||
|
||||
WARNING: Unplated multi-layer pad(s) detected
|
||||
Pad MH4-1(37mm,3mm) on Multi-Layer on Net GND
|
||||
Pad MH3-1(3mm,3mm) on Multi-Layer on Net GND
|
||||
Pad MH2-1(37mm,47mm) on Multi-Layer on Net GND
|
||||
Pad MH1-1(3mm,47mm) on Multi-Layer on Net GND
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (HasFootprint('GEN_C_0201') or HasFootprint('GEN_R_0201')),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (All),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (InNet('PG_1V0')),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (InComponent('U7')),(InComponent('U7'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (isVia),((IsPad and not InComponent('MH*') and not InComponent('U2')) or IsVia)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (InNetClass('DDR3 ADDR') or InNetClass('DQ0') or InNetClass('DQ1') or InNetClass('DQ2') or InNetClass('DQ3')),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.127mm) (InNetClass('DDR3 ADDR') or InNetClass('DQ0') or InNetClass('DQ1') or InNetClass('DQ2') or InNetClass('DQ3') or InDifferentialPair('DDR3_CLK')),(InNet('GND'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Clearance Constraint (Gap=0.152mm) (InAnyDifferentialPair),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Un-Routed Net Constraint ( (All) )
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Modified Polygon (Allow modified: No), (Allow shelved: No)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Width Constraint (Min=0.127mm) (Max=1mm) (Preferred=0.254mm) (All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Width Constraint (Min=0.1mm) (Max=0.254mm) (Preferred=0.127mm) (InNet('PG_1V0'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Width Constraint (Min=0.127mm) (Max=0.213mm) (Preferred=0.127mm) ((InNetClass('DDR3 ADDR')) OR (InNetClass('DQ0')) OR (InNetClass('DQ1')) OR (InNetClass('DQ2')) OR (InNetClass('DQ3')))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Hole Size Constraint (Min=0.025mm) (Max=3.2mm) (All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Hole To Hole Clearance (Gap=0.254mm) (All),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Minimum Solder Mask Sliver (Gap=0.098mm) (All),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Board Clearance Constraint (Gap=0mm) (All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS2') or InNetClass('DQ2'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS0') or InNetClass('DQ0'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS1') or InNetClass('DQ1'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps Target=DDR3_CLK_P_PP1) (InxSignalClass('xSignals_U1_U4,U5'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=1ps) (InDifferentialPairClass('PCIe'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS3') or InNetClass('DQ3'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=2ps) (InDifferentialPairClass('DDR3_CLK') or InDifferentialPairClass('DQS0') or InDifferentialPairClass('DQS1') or InDifferentialPairClass('DQS2') or InDifferentialPairClass('DQS3'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('ADC LVDS'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=2ps) (InDifferentialPairClass('ADC LVDS'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Matched Lengths(Delay Tolerance=5ps) (Disabled)(InNetClass('DDR3 ADDR'))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Vias Under SMD Constraint (Allowed=Not Allowed) ((HasFootprint('GEN_C_0201') OR HasFootprint('GEN_R_0201') OR HasFootprint('GEN_C_0402') OR HasFootprint('GEN_R_0402')))
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Component Clearance Constraint ( Horizontal Gap = 0.127mm, Vertical Gap = 0.254mm ) (All),(All)
|
||||
Rule Violations :0
|
||||
|
||||
Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
|
||||
Rule Violations :0
|
||||
|
||||
|
||||
Violations Detected : 0
|
||||
Waived Violations : 0
|
||||
Time Elapsed : 00:00:02
|
||||
@ -0,0 +1,420 @@
|
||||
<html>
|
||||
<head>
|
||||
<META http-equiv="Content-Type" content="text/html">
|
||||
<style type="text/css">
|
||||
h1, h2, h3, h4, h5, h6 {
|
||||
font-family : segoe ui;
|
||||
color : black;
|
||||
background-color : #EDE7D9;
|
||||
padding: 0.3em;
|
||||
}
|
||||
|
||||
h1 {
|
||||
font-size: 1.2em;
|
||||
}
|
||||
|
||||
h2 {
|
||||
font-size: 1.2em;
|
||||
}
|
||||
|
||||
body {
|
||||
font-family : segoe ui;
|
||||
}
|
||||
|
||||
td, th {
|
||||
padding: 0.5em;
|
||||
text-align : left;
|
||||
width: 10em;
|
||||
}
|
||||
th {
|
||||
background-color : #EEEEEE;
|
||||
|
||||
}
|
||||
th.column1, td.column1 {
|
||||
text-align: left;
|
||||
width : auto;
|
||||
}
|
||||
table {
|
||||
width : 100%;
|
||||
font-size: 0.9em;
|
||||
}
|
||||
|
||||
.DRC_summary_header {
|
||||
padding-bottom : 0.1em;
|
||||
border : 0px solid black;
|
||||
width: 100%;
|
||||
align: left;
|
||||
}
|
||||
|
||||
.DRC_summary_header_col1,
|
||||
.DRC_summary_header_col2,
|
||||
.DRC_summary_header_col3 {
|
||||
color : black;
|
||||
font-size:100%;
|
||||
padding : 0em;
|
||||
padding-top : 0.2em;
|
||||
padding-bottom 0.2em;
|
||||
border : 0px solid black;
|
||||
vertical-align: top;
|
||||
text-align: left;
|
||||
}
|
||||
|
||||
.DRC_summary_header_col1 {
|
||||
font-weight: bold;
|
||||
width: 8em;
|
||||
}
|
||||
|
||||
.DRC_summary_header_col2 {
|
||||
width: 0.1em;
|
||||
|
||||
}
|
||||
|
||||
.DRC_summary_header_col3 {
|
||||
width : auto;
|
||||
}
|
||||
|
||||
.header_holder {
|
||||
Width = 100%;
|
||||
border = 0px solid green;
|
||||
padding = 0;
|
||||
}
|
||||
|
||||
|
||||
.front_matter, .front_matter_column1, .front_matter_column2, .front_matter_column3
|
||||
{
|
||||
left : 0;
|
||||
top : 0;
|
||||
padding: 0em;
|
||||
padding-top : 0.1em;
|
||||
border : 0px solid black;
|
||||
width : 100%;
|
||||
vertical-align: top;
|
||||
text-align: left;
|
||||
}
|
||||
|
||||
.front_matter_column1 {
|
||||
width : 8em;
|
||||
font-weight: bold;
|
||||
}
|
||||
|
||||
.front_matter_column2 {
|
||||
width: 0.1em;
|
||||
}
|
||||
|
||||
.front_matter_column3 {
|
||||
width : auto;
|
||||
}
|
||||
|
||||
.total_column1, .total_column {
|
||||
font-weight : bold;
|
||||
}
|
||||
.total_column1 {
|
||||
text-align : left;
|
||||
}
|
||||
.warning, .error {
|
||||
color : red;
|
||||
font-weight : bold;
|
||||
}
|
||||
tr.onmouseout_odd {
|
||||
background-color : #white;
|
||||
}
|
||||
tr.onmouseout_even {
|
||||
background-color : #FAFAFA;
|
||||
}
|
||||
tr.onmouseover_odd, tr.onmouseover_even {
|
||||
background-color : #EEEEEE;
|
||||
}
|
||||
a:link, a:visited, .q a:link,.q a:active,.q {
|
||||
color: #21489e;
|
||||
}
|
||||
a:link.callback, a:visited.callback {
|
||||
color: #21489e;
|
||||
}
|
||||
a:link.customize, a:visited.customize {
|
||||
color: #C0C0C0;
|
||||
position: absolute;
|
||||
right: 10px;
|
||||
}
|
||||
p.contents_level1 {
|
||||
font-weight : bold;
|
||||
font-size : 110%;
|
||||
margin : 0.5em;
|
||||
}
|
||||
p.contents_level2 {
|
||||
position : relative;
|
||||
left : 20px;
|
||||
margin : 0.5em;
|
||||
}
|
||||
</style><script type="text/javascript">
|
||||
function coordToMils(coord) {
|
||||
var number = coord / 10000;
|
||||
|
||||
if (number != number.toFixed(3))
|
||||
number = number.toFixed(3);
|
||||
|
||||
return number + 'mil'
|
||||
}
|
||||
|
||||
function coordToMM(coord) {
|
||||
var number = 0.0254 * coord / 10000;
|
||||
|
||||
if (number != number.toFixed(4))
|
||||
number = number.toFixed(4);
|
||||
|
||||
return number + 'mm'
|
||||
}
|
||||
|
||||
function convertCoord(coordNode, units) {
|
||||
for (var i = 0; i < coordNode.childNodes.length; i++) {
|
||||
coordNode.removeChild(coordNode.childNodes[i]);
|
||||
}
|
||||
|
||||
var coord = coordNode.getAttribute('value');
|
||||
if (coord != null) {
|
||||
if (units == 'mm') {
|
||||
textNode = document.createTextNode(coordToMM(coord));
|
||||
coordNode.appendChild(textNode);
|
||||
} else if (units == 'mil') {
|
||||
textNode = document.createTextNode(coordToMils(coord));
|
||||
coordNode.appendChild(textNode);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
function convertUnits(unitNode, units) {
|
||||
for (var i = 0; i < unitNode.childNodes.length; i++) {
|
||||
unitNode.removeChild(unitNode.childNodes[i]);
|
||||
}
|
||||
|
||||
textNode = document.createTextNode(units);
|
||||
unitNode.appendChild(textNode);
|
||||
}
|
||||
|
||||
function changeUnits(radio_input, units) {
|
||||
if (radio_input.checked) {
|
||||
|
||||
var elements = document.getElementsByName('coordinate');
|
||||
if (elements) {
|
||||
for (var i = 0; i < elements.length; i++) {
|
||||
convertCoord(elements[i], units);
|
||||
}
|
||||
}
|
||||
|
||||
var elements = document.getElementsByName('units');
|
||||
if (elements) {
|
||||
for (var i = 0; i < elements.length; i++) {
|
||||
convertUnits(elements[i], units);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
</script><title>Design Rule Verification Report</title>
|
||||
</head>
|
||||
<body onload=""><img ALT="Altium" src="
|
||||
file://C:\Users\Public\Documents\Altium\AD21\Templates\AD_logo.png
|
||||
"><h1>Design Rule Verification Report</h1>
|
||||
<table class="header_holder">
|
||||
<td class="column1">
|
||||
<table class="front_matter">
|
||||
<tr class="front_matter">
|
||||
<td class="front_matter_column1">Date:</td>
|
||||
<td class="front_matter_column2"></td>
|
||||
<td class="front_matter_column3">2022-11-10</td>
|
||||
</tr>
|
||||
<tr class="front_matter">
|
||||
<td class="front_matter_column1">Time:</td>
|
||||
<td class="front_matter_column2"></td>
|
||||
<td class="front_matter_column3">1:52:28 AM</td>
|
||||
</tr>
|
||||
<tr class="front_matter">
|
||||
<td class="front_matter_column1">Elapsed Time:</td>
|
||||
<td class="front_matter_column2"></td>
|
||||
<td class="front_matter_column3">00:00:02</td>
|
||||
</tr>
|
||||
<tr class="front_matter">
|
||||
<td class="front_matter_column1">Filename:</td>
|
||||
<td class="front_matter_column2"></td>
|
||||
<td class="front_matter_column3"><a href="file:///C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc" class="file"><acronym title="C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc">C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc</acronym></a></td>
|
||||
</tr>
|
||||
</table>
|
||||
</td>
|
||||
<td class="column2">
|
||||
<table class="DRC_summary_header">
|
||||
<tr>
|
||||
<td class="DRC_summary_header_col1">Warnings:</td>
|
||||
<td class="DRC_summary_header_col2"></td>
|
||||
<td class="DRC_summary_header_col3" style="color : red">4</td></tr>
|
||||
<tr>
|
||||
<td class="DRC_summary_header_col1">Rule Violations:</td>
|
||||
<td class="DRC_summary_header_col2"></td>
|
||||
<td class="DRC_summary_header_col3">0</td></tr>
|
||||
</table>
|
||||
</td>
|
||||
</table><a name="IDVHTX51RQZ4XAKFNB2AVLMO35RP5I3XFW3DCSQTE2WZZNTQ0RBUNH"><h2>Summary</h2></a><table>
|
||||
<tr>
|
||||
<th class="column1">Warnings</th>
|
||||
<th class="column2">Count</th>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDV1JUBOLVHF34MWPOE1ETIUPSBL5XIGQT3FANBYIUA3OBFIROW3PK">Unplated multi-layer pad(s) detected</a></td>
|
||||
<td class="column2">4</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td style="font-weight : bold; text-align : right" class="column1">Total</td>
|
||||
<td style="font-weight : bold" class="column2">4</td>
|
||||
</tr>
|
||||
</table><br><table>
|
||||
<tr>
|
||||
<th class="column1">Rule Violations</th>
|
||||
<th class="column2">Count</th>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#ID0B0TMYONZUTJDTIHDTCWXPX0GJ3XU1G1CMZLPDPNMKQ54QDTRCUJ">Clearance Constraint (Gap=0.127mm) (HasFootprint('GEN_C_0201') or HasFootprint('GEN_R_0201')),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDCFJ30SQ4H5ENM5XEJROCPO5P0H5YBB5XHCD3CYKOOSCLWMX02YCH">Clearance Constraint (Gap=0.127mm) (All),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDN54VPKGELOPKPSJUBWK3HVSDEILOXA0XZBQBNCHR5EFUFWO3EHHD">Clearance Constraint (Gap=0.127mm) (InNet('PG_1V0')),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#ID1HB3TAQBZ05JDBE1VLTKL5EUYPJ1A5APNL5NINPPYVJEW25YIN5I">Clearance Constraint (Gap=0.127mm) (InComponent('U7')),(InComponent('U7'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDPJ5VKDSDSLXKH31DUDIV5P4KNK0OZTOFHB5VA3DSA4E0AC3CXNLP">Clearance Constraint (Gap=0.127mm) (isVia),((IsPad and not InComponent('MH*') and not InComponent('U2')) or IsVia)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#ID1YZRRP0FQ3VUOJMIYFJX5AA1ILWWEQTRD05T4WNTRTQPD0QSPF2F">Clearance Constraint (Gap=0.127mm) (InNetClass('DDR3 ADDR') or InNetClass('DQ0') or InNetClass('DQ1') or InNetClass('DQ2') or InNetClass('DQ3')),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDN4MZMG3ZLY4UGZWLKFO4AHMM1PBQHCXELTCYPYFDYOO5F5YKLWAL">Clearance Constraint (Gap=0.127mm) (InNetClass('DDR3 ADDR') or InNetClass('DQ0') or InNetClass('DQ1') or InNetClass('DQ2') or InNetClass('DQ3') or InDifferentialPair('DDR3_CLK')),(InNet('GND'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDL3HJHDT2QAVFQRGUDIIZJQ2KBELZWVOR4ZHXWM1FVWXJMP5K31G">Clearance Constraint (Gap=0.152mm) (InAnyDifferentialPair),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDSV4LCGR5S34ZMD0PQP4XMDFTKE1PXACDRET0MOJWDPR5JGZPDZU">Short-Circuit Constraint (Allowed=No) (All),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDX4LRY24AKFJVOVUB0LZUHGT04CE5FTJHONGIWAPYTDPHWLA2RUVG">Un-Routed Net Constraint ( (All) )</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDNJOXYXL2NOOAOQHY40142X3WIIKIMK3BJZRG03CZGVTJITL5FRXE">Modified Polygon (Allow modified: No), (Allow shelved: No)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDGLO0B3IVUQOGHTO44LBWQTXZILNQWPYFWWVOLRIJA3ZP15002XRD">Width Constraint (Min=0.127mm) (Max=1mm) (Preferred=0.254mm) (All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#ID0KI5440MNONXIZVJRR3WGHJD2M4LJT3WFA2CR1LCIDEB45KAQVJH">Width Constraint (Min=0.1mm) (Max=0.254mm) (Preferred=0.127mm) (InNet('PG_1V0'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDCBGHMNNZS5SXDQX1DCW0Y25VOU4HEM33NPTFKJMNJQJKCIJH2ME">Width Constraint (Min=0.127mm) (Max=0.213mm) (Preferred=0.127mm) ((InNetClass('DDR3 ADDR')) OR (InNetClass('DQ0')) OR (InNetClass('DQ1')) OR (InNetClass('DQ2')) OR (InNetClass('DQ3')))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDB5ZVTUPPSAL2CBU0YPTCZVB2KMLQJ3S03GWSLXDQHOZHKRVN1T2P">Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDFR1H5QOZ1XVWLUTCD3R0H5KAVPFJXIU551ZFISI0T0LAHBXCPDNH">Hole Size Constraint (Min=0.025mm) (Max=3.2mm) (All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#ID05ZSFQRFSR01GU0ZPUKYDS3RBCU4BAZPAVTSJOJXSVXJSNA55VM">Hole To Hole Clearance (Gap=0.254mm) (All),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDL4QJYO2UYNPIDBSOBDSMDSP03FTOVIWFNJSRZVCTQF5ZKKZFSROL">Minimum Solder Mask Sliver (Gap=0.098mm) (All),(All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDX3ZPDSG1YKGPJNRTEVEBBKL5GPDCEOH4HGDUD3L0JSOO4LJAA3BJ">Board Clearance Constraint (Gap=0mm) (All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDEO1LGNRGSZ2AJXGB1DK1KOROY1BAVMJLJI2BJH0IPQIFR3CSELE">Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS2') or InNetClass('DQ2'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDVCGAVEVWCVXEIEBQEXPCJIMALWWD0KVF0Y0RTM5KHALIBQPZ1VN">Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS0') or InNetClass('DQ0'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDIKRGEL0CTMRIB2WAYDLX22M4JBUEV2QGXBBSQ2JA13V5UHMWSLFF">Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS1') or InNetClass('DQ1'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDLCLF0I4G1IVSPDP52ZCVCEOOUEIKCRMZDDEWQBHSJJ3ET5UNF05E">Matched Lengths(Delay Tolerance=5ps Target=DDR3_CLK_P_PP1) (InxSignalClass('xSignals_U1_U4,U5'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDLEFAVHK5Q4FIIH2B0MKNKO4RPDQRTW3DYXEXRBM1HYLSP2IAZN3P">Matched Lengths(Delay Tolerance=1ps) (InDifferentialPairClass('PCIe'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#ID5C03E1KZ10MFMT05HNI2YV1IOCWV2EOWFMMNEEAE1T2TTHSESLI">Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('DQS3') or InNetClass('DQ3'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDOR5M2F4Y13A1GROWLXVNRS3PJLZZRXGSSU2TXO2JTUMDQ5CXG1M">Matched Lengths(Delay Tolerance=2ps) (InDifferentialPairClass('DDR3_CLK') or InDifferentialPairClass('DQS0') or InDifferentialPairClass('DQS1') or InDifferentialPairClass('DQS2') or InDifferentialPairClass('DQS3'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDYTDR52YC505AJTIP1D1CVVHOGPG1L5AABPTWI4GVCWSEOS2JRHYO">Matched Lengths(Delay Tolerance=5ps) (InDifferentialPairClass('ADC LVDS'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDEMTHBK000W2WFEVKBFN04OMZDKENR4U1YA25T3DZKQHLBV1DXS1I">Matched Lengths(Delay Tolerance=2ps) (InDifferentialPairClass('ADC LVDS'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDC3YJE4UAFQTWIO5O1EDSQBZVII45UXH1WEGRHDPMYM310PQDYOTO">Matched Lengths(Delay Tolerance=5ps) (Disabled)(InNetClass('DDR3 ADDR'))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDJSMZ1L542AXHIKWSURWPGWZ5OBQLSBSPGODSO4HMDZKBPCYZLZDM">Vias Under SMD Constraint (Allowed=Not Allowed) ((HasFootprint('GEN_C_0201') OR HasFootprint('GEN_R_0201') OR HasFootprint('GEN_C_0402') OR HasFootprint('GEN_R_0402')))</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="#IDAS5GTXVIYKOXEXWXZI4PACID0EDSIA0RD3ED1AJH3SEOWW4H0EYH">Component Clearance Constraint ( Horizontal Gap = 0.127mm, Vertical Gap = 0.254mm ) (All),(All) </a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="#IDEUVSZIXNJO3UFS4Y1MUCFWMBLCTH1TLIMK2NEXC2ZDYGHBHKSZTB">Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)</a></td>
|
||||
<td class="column2">0</td>
|
||||
</tr>
|
||||
<tr>
|
||||
<td style="font-weight : bold; text-align : right" class="column1">Total</td>
|
||||
<td style="font-weight : bold" class="column2">0</td>
|
||||
</tr>
|
||||
</table><br><a name="IDF1K5YKD5NWREJAFI1AOUKYIF2JFXJES5LRCQATPOYRG5HSKXYJ2K"><h2>Warnings</h2></a><a name="IDV1JUBOLVHF34MWPOE1ETIUPSBL5XIGQT3FANBYIUA3OBFIROW3PK"><table>
|
||||
<tr>
|
||||
<th style="text-align : left" colspan="1" class="warning">Unplated multi-layer pad(s) detected</th>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=2374.016mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=1248.031mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=2374.016mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=1248.031mil|Absolute=True">Pad MH4-1(37mm,3mm) on Multi-Layer</acronym></a> on <a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True">Net GND</acronym></a></td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=1248.031mil|Location1.Y=1035.433mil|Location2.Y=1248.031mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=1248.031mil|Location1.Y=1035.433mil|Location2.Y=1248.031mil|Absolute=True">Pad MH3-1(3mm,3mm) on Multi-Layer</acronym></a> on <a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True">Net GND</acronym></a></td>
|
||||
</tr>
|
||||
<tr class="onmouseout_odd" onmouseover="className = 'onmouseover_odd'" onmouseout="className = 'onmouseout_odd'">
|
||||
<td class="column1"><a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=2374.016mil|Location2.X=2586.614mil|Location1.Y=2767.716mil|Location2.Y=2980.315mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=2374.016mil|Location2.X=2586.614mil|Location1.Y=2767.716mil|Location2.Y=2980.315mil|Absolute=True">Pad MH2-1(37mm,47mm) on Multi-Layer</acronym></a> on <a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True">Net GND</acronym></a></td>
|
||||
</tr>
|
||||
<tr class="onmouseout_even" onmouseover="className = 'onmouseover_even'" onmouseout="className = 'onmouseout_even'">
|
||||
<td class="column1"><a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=1248.031mil|Location1.Y=2767.716mil|Location2.Y=2980.315mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=1248.031mil|Location1.Y=2767.716mil|Location2.Y=2980.315mil|Absolute=True">Pad MH1-1(3mm,47mm) on Multi-Layer</acronym></a> on <a href="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True" class="callback"><acronym title="dxpprocess://PCB:Zoom?document=C:\Users\Aleksa\Documents\Altium\FPGA_Module\FPGA_Module.PcbDoc;viewname=PCBEditor;Action=AREA_DYNAMICZOOM|Location1.X=1035.433mil|Location2.X=2586.614mil|Location1.Y=1035.433mil|Location2.Y=2980.315mil|Absolute=True">Net GND</acronym></a></td>
|
||||
</tr>
|
||||
</table></a><hr color="#EEEEEE"><a href="#top" style="font-size: 0.9em">Back to top</a><br><br></body>
|
||||
</html>
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@ -214,8 +214,17 @@ G04:AMPARAMS|DCode=41|XSize=157.5mil|YSize=133.9mil|CornerRadius=3.3mil|HoleSize
|
||||
1,1,0.0067,0.0754,-0.0636*
|
||||
1,1,0.0067,-0.0754,-0.0636*
|
||||
%
|
||||
G04:AMPARAMS|DCode=52|XSize=11.8mil|YSize=59.1mil|CornerRadius=3mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=270.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
G04:AMPARAMS|DCode=52|XSize=16.5mil|YSize=18.1mil|CornerRadius=4.1mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=180.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
%AMROUNDEDRECTD52*
|
||||
21,1,0.0165,0.0098,0,0,180.0*
|
||||
21,1,0.0083,0.0181,0,0,180.0*
|
||||
1,1,0.0083,-0.0041,0.0049*
|
||||
1,1,0.0083,0.0041,0.0049*
|
||||
1,1,0.0083,0.0041,-0.0049*
|
||||
1,1,0.0083,-0.0041,-0.0049*
|
||||
%
|
||||
G04:AMPARAMS|DCode=53|XSize=11.8mil|YSize=59.1mil|CornerRadius=3mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=270.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
%AMROUNDEDRECTD53*
|
||||
21,1,0.0118,0.0531,0,0,270.0*
|
||||
21,1,0.0059,0.0591,0,0,270.0*
|
||||
1,1,0.0059,-0.0266,-0.0030*
|
||||
@ -223,8 +232,8 @@ G04:AMPARAMS|DCode=52|XSize=11.8mil|YSize=59.1mil|CornerRadius=3mil|HoleSize=0mi
|
||||
1,1,0.0059,0.0266,0.0030*
|
||||
1,1,0.0059,0.0266,-0.0030*
|
||||
%
|
||||
G04:AMPARAMS|DCode=53|XSize=110.2mil|YSize=65mil|CornerRadius=8.1mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=45.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
%AMROUNDEDRECTD53*
|
||||
G04:AMPARAMS|DCode=54|XSize=110.2mil|YSize=65mil|CornerRadius=8.1mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=45.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
%AMROUNDEDRECTD54*
|
||||
21,1,0.1102,0.0487,0,0,45.0*
|
||||
21,1,0.0940,0.0650,0,0,45.0*
|
||||
1,1,0.0162,0.0505,0.0160*
|
||||
@ -232,15 +241,6 @@ G04:AMPARAMS|DCode=53|XSize=110.2mil|YSize=65mil|CornerRadius=8.1mil|HoleSize=0m
|
||||
1,1,0.0162,-0.0505,-0.0160*
|
||||
1,1,0.0162,0.0160,0.0505*
|
||||
%
|
||||
G04:AMPARAMS|DCode=54|XSize=16.5mil|YSize=18.1mil|CornerRadius=4.1mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=180.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
%AMROUNDEDRECTD54*
|
||||
21,1,0.0165,0.0098,0,0,180.0*
|
||||
21,1,0.0083,0.0181,0,0,180.0*
|
||||
1,1,0.0083,-0.0041,0.0049*
|
||||
1,1,0.0083,0.0041,0.0049*
|
||||
1,1,0.0083,0.0041,-0.0049*
|
||||
1,1,0.0083,-0.0041,-0.0049*
|
||||
%
|
||||
G04:AMPARAMS|DCode=55|XSize=16.5mil|YSize=18.1mil|CornerRadius=4.1mil|HoleSize=0mil|Usage=FLASHONLY|Rotation=135.000|XOffset=0mil|YOffset=0mil|HoleType=Round|Shape=RoundedRectangle|*
|
||||
%AMROUNDEDRECTD55*
|
||||
21,1,0.0165,0.0098,0,0,135.0*
|
||||
|
||||
@ -1,5 +1,5 @@
|
||||
------------------------------------------------------------------------------------------
|
||||
Gerber File Extension Report For: FPGA_Module_Panel.GBR 2022-11-10 12:03:30 AM
|
||||
Gerber File Extension Report For: FPGA_Module_Panel.GBR 2022-11-10 1:52:43 AM
|
||||
------------------------------------------------------------------------------------------
|
||||
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user