AllSpiceMirrors/Frequency_Inverter
0
Fork 0
mirror of https://github.com/Indemsys/Frequency_Inverter.git synced 2026-05-15 07:07:31 +00:00
Files Issues Projects Releases
Files
main
Frequency_Inverter/Firmware/Inverter_bootloader/BSP/PE/CPU.h
Indemsys db9ab280ef Initial commit
2022-01-04 12:22:53 +02:00

229 lines
8.9 KiB
C
Raw Permalink Blame History

#ifndef __Cpu_H
#define __Cpu_H
#ifdef __cplusplus
extern "C" {
#endif
#define CPU_CLOCK_CONFIG_NUMBER 0x03U /* Specifies number of defined clock configurations. */
/* CPU frequencies in clock configuration 0 */
#define CPU_CLOCK_CONFIG_0 0x00U /* Clock configuration 0 identifier */
/* CPU frequencies in clock configuration 1 */
#define CPU_CLOCK_CONFIG_1 0x01U /* Clock configuration 1 identifier */
/* CPU frequencies in clock configuration 2 */
#define CPU_CLOCK_CONFIG_2 0x02U /* Clock configuration 2 identifier */
#define LLWU_FILTER1 0x01000000U /* WakeUp caused by digital filter 1 */
#define LLWU_FILTER2 0x02000000U /* WakeUp caused by digital filter 2 */
/*lint -esym(765,SR_reg) Disable MISRA rule (8.10) checking for symbols (SR_reg). The SR_reg is used in inline assembler. */
extern volatile uint8_t SR_reg; /* Current FAULTMASK register */
/*lint -esym(765,SR_lock) Disable MISRA rule (8.10) checking for symbols (SR_lock). The SR_reg is used in inline assembler. */
extern volatile uint8_t SR_lock;
typedef uint16_t LDD_TError; /*!< Error type. */
typedef uint8_t LDD_TClockConfiguration; /*!< CPU clock configuration type. */
/*! Driver operation mode type. */
typedef enum {
DOM_NONE,
DOM_RUN,
DOM_WAIT,
DOM_SLEEP,
DOM_STOP
} LDD_TDriverOperationMode;
typedef void LDD_TCallbackParam; /*!< Pointer to this type specifies the user data to be passed as a callback parameter. */
typedef void (*LDD_TCallback)(LDD_TCallbackParam *CallbackParam); /*!< Callback type used for definition of callback functions. */
/*
** ===================================================================
** Method : Cpu_MCGAutoTrim (component MK60FN1M0LQ15)
** Description :
** This method uses MCG auto trim feature to trim internal
** reference clock. This method can be used only in a clock
** configuration which derives its bus clock from external
** reference clock (<MCG mode> must be one of the following
** modes - FEE, FBE, BLPE, PEE, PBE) and if value of <Bus clock>
** is in the range <8; 16>MHz.
** The slow internal reference clock is trimmed to the value
** selected by <Slow internal reference clock [kHz]> property.
** The fast internal reference clock will be trimmed to value
** 4MHz.
** Parameters :
** NAME - DESCRIPTION
** ClockSelect - Selects which internal
** reference clock will be trimmed.
** 0 ... slow (32kHz) internal reference clock
** will be trimmed
** > 0 ... fast (4MHz) internal reference
** clock will be trimmed
** Returns :
** --- - Error code
** ERR_OK - OK
** ERR_SPEED - The method does not work in the
** active clock configuration.
** ERR_FAILED - Autotrim process failed.
** ===================================================================
*/
LDD_TError Cpu_MCGAutoTrim(uint8_t ClockSelect);
/*
** ===================================================================
** Method : Cpu_GetLLSWakeUpFlags (component MK60FN1M0LQ15)
** Description :
** This method returns the current status of the LLWU wake-up
** flags indicating which wake-up source caused the MCU to exit
** LLS or VLLSx low power mode.
** The following predefined constants can be used to determine
** the wake-up source:
** LLWU_EXT_PIN0, ... LLWU_EXT_PIN15 - external pin 0 .. 15
** caused the wake-up
** LLWU_INT_MODULE0 .. LLWU_INT_MODULE7 - internal module 0..15
** caused the wake-up.
** Parameters : None
** Returns :
** --- - Returns the current status of the LLWU
** wake-up flags indicating which wake-up
** source caused the MCU to exit LLS or VLLSx
** low power mode.
** ===================================================================
*/
uint32_t Cpu_GetLLSWakeUpFlags(void);
/*
** ===================================================================
** Method : Cpu_SetClockConfiguration (component MK60FN1M0LQ15)
** Description :
** Calling of this method will cause the clock configuration
** change and reconfiguration of all components according to
** the requested clock configuration setting.
** Parameters :
** NAME - DESCRIPTION
** ModeID - Clock configuration identifier
** Returns :
** --- - ERR_OK - OK.
** ERR_RANGE - Mode parameter out of range
** ===================================================================
*/
LDD_TError Cpu_SetClockConfiguration(LDD_TClockConfiguration ModeID);
/*
** ===================================================================
** Method : Cpu_GetClockConfiguration (component MK60FN1M0LQ15)
** Description :
** Returns the active clock configuration identifier. The
** method is enabled only if more than one clock configuration
** is enabled in the component.
** Parameters : None
** Returns :
** --- - Active clock configuration identifier
** ===================================================================
*/
uint8_t Cpu_GetClockConfiguration(void);
/*
** ===================================================================
** Method : Cpu_SetOperationMode (component MK60FN1M0LQ15)
** Description :
** This method requests to change the component's operation
** mode (RUN, WAIT, SLEEP, STOP). The target operation mode
** will be entered immediately.
** See <Operation mode settings> for further details of the
** operation modes mapping to low power modes of the cpu.
** Parameters :
** NAME - DESCRIPTION
** OperationMode - Requested driver
** operation mode
** ModeChangeCallback - Callback to
** notify the upper layer once a mode has been
** changed. Parameter is ignored, only for
** compatibility of API with other components.
** * ModeChangeCallbackParamPtr
** - Pointer to callback parameter to notify
** the upper layer once a mode has been
** changed. Parameter is ignored, only for
** compatibility of API with other components.
** Returns :
** --- - Error code
** ERR_OK - OK
** ERR_PARAM_MODE - Invalid operation mode
** ===================================================================
*/
LDD_TError Cpu_SetOperationMode(LDD_TDriverOperationMode OperationMode, LDD_TCallback ModeChangeCallback, LDD_TCallbackParam *ModeChangeCallbackParamPtr);
/*
** ===================================================================
** Method : Cpu_EnableInt (component MK60FN1M0LQ15)
** Description :
** Enables all maskable interrupts.
** Parameters : None
** Returns : Nothing
** ===================================================================
*/
void Cpu_EnableInt(void);
/*
** ===================================================================
** Method : Cpu_DisableInt (component MK60FN1M0LQ15)
** Description :
** Disables all maskable interrupts.
** Parameters : None
** Returns : Nothing
** ===================================================================
*/
void Cpu_DisableInt(void);
/*
** ===================================================================
** Method : Cpu_INT_LLWInterrupt (component MK60FN1M0LQ15)
**
** Description :
** This ISR services the 'LLWU' interrupt.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
void Init_cpu(void);
/*
** ===================================================================
** Method : Init_cpu_clock_subsystem (component MK60FN1M0LQ15)
**
** Description :
** Initializes the whole system like timing, external bus, etc.
** This method is internal. It is used by Processor Expert only.
** ===================================================================
*/
/* END Cpu. */
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif
/* __Cpu_H */
/*!
** @}
*/
/*
** ###################################################################
**
** This file was created by Processor Expert 10.2 [05.06]
** for the Freescale Kinetis series of microcontrollers.
**
** ###################################################################
*/
Reference in New Issue View Git Blame Copy Permalink