mirror of
https://gitlab.com/zephray/glider.git
synced 2026-03-16 13:26:54 +00:00
44 lines
1.4 KiB
Plaintext
44 lines
1.4 KiB
Plaintext
============================================================
|
|
GLIDER13 ASSEMBLY AND SAMPLE CASE FILES - README
|
|
============================================================
|
|
|
|
[ FILE DESCRIPTIONS ]
|
|
|
|
* Assembly.step
|
|
This file represents the Glider13 in its "out-of-the-box"
|
|
state as delivered.
|
|
|
|
* Assembly w Case.step
|
|
A reference/sample case design for the Glider13.
|
|
|
|
* Case Components
|
|
The case consists of three files: Frame1, Back Plate1, and
|
|
Button1. You can 3D print these parts directly and install
|
|
them onto the Glider13 Assembly.
|
|
|
|
|
|
[ ASSEMBLY INSTRUCTIONS ]
|
|
|
|
1. MOUNTING THE ASSEMBLY:
|
|
Use at least FIVE M4*5mm CM Flat-Head screws to secure the
|
|
Assembly to the Back Plate.
|
|
|
|
2. SECURING THE FRAME:
|
|
Use 14 M3*8mm CM Flat-Head screws to fix the Back Plate
|
|
to the Frame.
|
|
|
|
3. PRINTING CALIBRATION:
|
|
Due to the large physical size of the components, you may
|
|
need to adjust the SCALING/SHRINKAGE COMPENSATION in your
|
|
slicer settings to account for your 3D printer's specific
|
|
performance.
|
|
|
|
|
|
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|
|
[!] CRITICAL WARNING:
|
|
DO NOT use M4 screws longer than the specified length when
|
|
securing the Assembly Plate. Using excessively long screws
|
|
may pull out the HEAT-SET INSERTS or, in the worst case,
|
|
CRACK THE SCREEN GLASS.
|
|
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|