glider/fw/fpga.c

162 lines
4.1 KiB
C

//
// Copyright 2022 Wenting Zhang <zephray@outlook.com>
//
// Permission is hereby granted, free of charge, to any person obtaining a copy
// of this software and associated documentation files (the "Software"), to deal
// in the Software without restriction, including without limitation the rights
// to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
// copies of the Software, and to permit persons to whom the Software is
// furnished to do so, subject to the following conditions:
//
// The above copyright notice and this permission notice shall be included in
// all copies or substantial portions of the Software.
//
// THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
// IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
// FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
// AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
// LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
// OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
// SOFTWARE.
//
#include "pico/stdlib.h"
#include <stdio.h>
#include "utils.h"
#include "fpga.h"
#include "bitstream.h"
#define FPGA_CS 13
#define FPGA_MOSI 15
#define FPGA_MISO 12
#define FPGA_SCLK 14
#define FPGA_PROG 17
#define FPGA_DONE 18
#define FPGA_SUSP 19
static int fpga_done = 0;
static void gpio_init_out(uint32_t pin, bool val) {
gpio_init(pin);
gpio_put(pin, val);
gpio_set_dir(pin, GPIO_OUT);
}
static void gpio_init_ipu(uint32_t pin) {
gpio_init(pin);
gpio_pull_up(pin);
}
static void delay_loop(uint32_t t) {
volatile uint32_t x = t;
while (x--);
}
static void fpga_send_byte(uint8_t byte) {
for (int i = 0; i < 8; i++) {
gpio_put(FPGA_MOSI, byte & 0x80);
gpio_put(FPGA_SCLK, 1);
byte <<= 1;
gpio_put(FPGA_SCLK, 0);
}
}
static void fpga_send_byte_slow(uint8_t byte) {
for (int i = 0; i < 8; i++) {
gpio_put(FPGA_MOSI, byte & 0x80);
delay_loop(20);
gpio_put(FPGA_SCLK, 1);
delay_loop(20);
byte <<= 1;
gpio_put(FPGA_SCLK, 0);
}
}
void fpga_write_reg8(uint8_t addr, uint8_t val) {
gpio_put(FPGA_CS, 0);
fpga_send_byte_slow(addr);
fpga_send_byte_slow(val);
gpio_put(FPGA_CS, 1);
}
void fpga_write_reg16(uint8_t addr, uint16_t val) {
gpio_put(FPGA_CS, 0);
fpga_send_byte_slow(addr);
fpga_send_byte_slow(val >> 8);
fpga_send_byte_slow(val & 0xff);
gpio_put(FPGA_CS, 1);
}
void fpga_write_bulk(uint8_t addr, uint8_t *buf, int length) {
gpio_put(FPGA_CS, 0);
fpga_send_byte_slow(addr);
for (int i = 0; i < length; i++) {
fpga_send_byte_slow(buf[i]);
}
gpio_put(FPGA_CS, 1);
}
static void fpga_load_bitstream(uint8_t *stream, int size) {
gpio_put(FPGA_CS, 0);
for (int i = 0; i < size; i++) {
fpga_send_byte(stream[i]);
}
gpio_put(FPGA_CS, 1);
printf("FPGA bitstream load done.\n");
}
static void fpga_wait_done(bool timeout) {
if (timeout) {
int i;
for (i = 0; i < 1000; i++) {
if (gpio_get(FPGA_DONE) == 1)
break;
sleep_ms(1);
}
if (gpio_get(FPGA_DONE) == 0) {
fatal("FPGA done does not go high after 1s");
}
printf("FPGA is up after %d ms.\n", i);
}
else {
while (gpio_get(FPGA_DONE) != 1);
printf("FPGA is up.\n");
}
}
void fpga_init(void) {
// Initialize FPGA pins
gpio_init_out(FPGA_CS, 1);
gpio_init_out(FPGA_MOSI, 1);
gpio_init_ipu(FPGA_MISO);
gpio_init_out(FPGA_SCLK, 0);
gpio_init_out(FPGA_PROG, 1);
gpio_init_ipu(FPGA_DONE);
gpio_init_out(FPGA_SUSP, 0);
gpio_put(FPGA_CS, 1);
// FPGA Reset
gpio_put(FPGA_PROG, 0);
sleep_ms(100);
gpio_put(FPGA_PROG, 1);
sleep_ms(100);
// Load bitstream
#if 1
fpga_load_bitstream(fpga_bitstream, fpga_bitstream_length);
fpga_wait_done(true);
#else
fpga_wait_done(false);
#endif
}
void fpga_suspend(void) {
}
void fpga_resume(void) {
}