AllSpiceMirrors/kicad
7
Fork 0
mirror of https://gitlab.com/kicad/code/kicad.git synced 2024-11-22 11:35:00 +00:00
Files Issues Releases Activity
master
kicad/pcbnew/dialogs/panel_setup_constraints_base.cpp
Fabien Corona 6d85853365 Creepage : add minimum slot width
2024-10-22 08:42:42 +02:00

488 lines
27 KiB
C++
Raw Permalink Blame History

///////////////////////////////////////////////////////////////////////////
// C++ code generated with wxFormBuilder (version 4.2.1-0-g80c4cb6)
// http://www.wxformbuilder.org/
//
// PLEASE DO *NOT* EDIT THIS FILE!
///////////////////////////////////////////////////////////////////////////
#include "panel_setup_constraints_base.h"
///////////////////////////////////////////////////////////////////////////
PANEL_SETUP_CONSTRAINTS_BASE::PANEL_SETUP_CONSTRAINTS_BASE( wxWindow* parent, wxWindowID id, const wxPoint& pos, const wxSize& size, long style, const wxString& name ) : wxPanel( parent, id, pos, size, style, name )
{
wxBoxSizer* bMainSizer;
bMainSizer = new wxBoxSizer( wxHORIZONTAL );
m_scrolledWindow = new wxScrolledWindow( this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL );
m_scrolledWindow->SetScrollRate( 0, 5 );
wxBoxSizer* bScrolledSizer;
bScrolledSizer = new wxBoxSizer( wxHORIZONTAL );
wxBoxSizer* sbFeatureConstraints;
sbFeatureConstraints = new wxBoxSizer( wxVERTICAL );
wxFlexGridSizer* fgFeatureConstraints;
fgFeatureConstraints = new wxFlexGridSizer( 0, 4, 0, 0 );
fgFeatureConstraints->SetFlexibleDirection( wxBOTH );
fgFeatureConstraints->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
m_staticText23 = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Copper"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText23->Wrap( -1 );
fgFeatureConstraints->Add( m_staticText23, 0, wxALIGN_CENTER_HORIZONTAL|wxTOP|wxBOTTOM|wxLEFT, 4 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
m_bitmapClearance = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapClearance, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_clearanceTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
m_clearanceTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_clearanceTitle, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 5 );
m_clearanceCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_clearanceCtrl->SetToolTip( _("The minimum clearance between copper items which do not belong to the same net. If set, this is an absolute minimum which cannot be reduced by netclasses, custom rules, or other settings.") );
fgFeatureConstraints->Add( m_clearanceCtrl, 0, wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM, 5 );
m_clearanceUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_clearanceUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_clearanceUnits, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
m_bitmapMinTrackWidth = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinTrackWidth, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_TrackMinWidthTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum track width:"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_TrackMinWidthTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_TrackMinWidthTitle, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT, 5 );
m_TrackMinWidthCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_TrackMinWidthCtrl->SetToolTip( _("The minimum track width. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings.") );
m_TrackMinWidthCtrl->SetMinSize( wxSize( 120,-1 ) );
fgFeatureConstraints->Add( m_TrackMinWidthCtrl, 0, wxALIGN_LEFT|wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_TrackMinWidthUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_TrackMinWidthUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_TrackMinWidthUnits, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_bitmapMinConn = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinConn, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxLEFT|wxRIGHT, 5 );
m_MinConnTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum connection width:"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_MinConnTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_MinConnTitle, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT, 5 );
m_MinConnCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_MinConnCtrl->SetToolTip( _("The minimum copper width of connected copper items.") );
m_MinConnCtrl->SetMinSize( wxSize( 120,-1 ) );
fgFeatureConstraints->Add( m_MinConnCtrl, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxBOTTOM|wxEXPAND|wxTOP, 5 );
m_MinConnUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_MinConnUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_MinConnUnits, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_bitmapMinViaAnnulus = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinViaAnnulus, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_ViaMinAnnulusTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum annular width:"), wxDefaultPosition, wxDefaultSize, 0 );
m_ViaMinAnnulusTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_ViaMinAnnulusTitle, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 5 );
m_ViaMinAnnulusCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_ViaMinAnnulusCtrl->SetToolTip( _("The minimum annular ring width. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings.") );
fgFeatureConstraints->Add( m_ViaMinAnnulusCtrl, 0, wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM, 5 );
m_ViaMinAnnulusUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_ViaMinAnnulusUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_ViaMinAnnulusUnits, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
m_bitmapMinViaDiameter = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinViaDiameter, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_ViaMinTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum via diameter:"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_ViaMinTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_ViaMinTitle, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT, 5 );
m_SetViasMinSizeCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SetViasMinSizeCtrl->SetToolTip( _("The minimum via diameter. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings.") );
fgFeatureConstraints->Add( m_SetViasMinSizeCtrl, 0, wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP|wxBOTTOM, 5 );
m_ViaMinUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_ViaMinUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_ViaMinUnits, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_bitmapHoleClearance = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapHoleClearance, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_HoleClearanceLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Copper to hole clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
m_HoleClearanceLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_HoleClearanceLabel, 0, wxTOP|wxBOTTOM|wxRIGHT|wxALIGN_CENTER_VERTICAL, 5 );
m_HoleClearanceCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_HoleClearanceCtrl->SetToolTip( _("The minimum clearance between a hole and an unassociated copper item. If set, this is an absolute minimum and cannot be reduced by custom rules or other settings.") );
fgFeatureConstraints->Add( m_HoleClearanceCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_HoleClearanceUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_HoleClearanceUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_HoleClearanceUnits, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
m_bitmapEdgeClearance = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapEdgeClearance, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_EdgeClearanceLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Copper to edge clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
m_EdgeClearanceLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_EdgeClearanceLabel, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 5 );
m_EdgeClearanceCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_EdgeClearanceCtrl->SetToolTip( _("The minimum clearance between the board edge and any copper item. If set, this is an absolute minimum and cannot be reduced by custom rules or other settings.") );
fgFeatureConstraints->Add( m_EdgeClearanceCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_EdgeClearanceUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_EdgeClearanceUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_EdgeClearanceUnits, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
m_bitmapMinGrooveWidth = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinGrooveWidth, 0, wxALL, 5 );
m_minGrooveWidthLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum groove for creepage:"), wxDefaultPosition, wxDefaultSize, 0 );
m_minGrooveWidthLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_minGrooveWidthLabel, 0, wxALL, 5 );
m_minGrooveWidthCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_minGrooveWidthCtrl->SetToolTip( _("The minimum slot width from DRC creepage checks") );
fgFeatureConstraints->Add( m_minGrooveWidthCtrl, 0, wxALIGN_CENTER_VERTICAL|wxBOTTOM|wxEXPAND|wxTOP, 5 );
m_minGrooveWidthUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_minGrooveWidthUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_minGrooveWidthUnits, 0, wxALL, 5 );
m_staticline3 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline3, 0, wxTOP|wxEXPAND, 10 );
m_staticline4 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline4, 0, wxEXPAND|wxTOP, 10 );
m_staticline5 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline5, 0, wxEXPAND|wxTOP, 10 );
m_staticline6 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline6, 0, wxEXPAND|wxTOP, 10 );
m_staticText24 = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Holes"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText24->Wrap( -1 );
fgFeatureConstraints->Add( m_staticText24, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 4 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND|wxTOP, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND|wxTOP, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND|wxTOP, 5 );
m_bitmapMinViaDrill = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinViaDrill, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_MinDrillTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum through hole:"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_MinDrillTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_MinDrillTitle, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT, 5 );
m_MinDrillCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_MinDrillCtrl->SetToolTip( _("The minimum through-hole size. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules or other settings.") );
fgFeatureConstraints->Add( m_MinDrillCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_MinDrillUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_MinDrillUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_MinDrillUnits, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_bitmapMinHoleClearance = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinHoleClearance, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_HoleToHoleTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Hole to hole clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
m_HoleToHoleTitle->Wrap( -1 );
fgFeatureConstraints->Add( m_HoleToHoleTitle, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 5 );
m_SetHoleToHoleCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_SetHoleToHoleCtrl->SetToolTip( _("The minimum clearance between two drilled holes. If set, this is an absolute minimum and cannot be reduced by custom rules or other settings. (Note: does not apply to milled holes.)") );
fgFeatureConstraints->Add( m_SetHoleToHoleCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_HoleToHoleUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_HoleToHoleUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_HoleToHoleUnits, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
m_staticline8 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline8, 0, wxEXPAND|wxTOP, 10 );
m_staticline9 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline9, 0, wxEXPAND|wxTOP, 10 );
m_staticline10 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline10, 0, wxEXPAND|wxTOP, 10 );
m_staticline11 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline11, 0, wxEXPAND|wxTOP, 10 );
m_staticText25 = new wxStaticText( m_scrolledWindow, wxID_ANY, _("uVias"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText25->Wrap( -1 );
fgFeatureConstraints->Add( m_staticText25, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 4 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND|wxTOP, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND|wxTOP, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND|wxTOP, 5 );
m_bitmapMinuViaDiameter = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinuViaDiameter, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_uviaMinSizeLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum uVia diameter:"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_uviaMinSizeLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_uviaMinSizeLabel, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT, 5 );
m_uviaMinSizeCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_uviaMinSizeCtrl->SetToolTip( _("The minimum diameter for micro-vias. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings.") );
fgFeatureConstraints->Add( m_uviaMinSizeCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_uviaMinSizeUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_uviaMinSizeUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_uviaMinSizeUnits, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_bitmapMinuViaDrill = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_bitmapMinuViaDrill, 0, wxALIGN_CENTER_HORIZONTAL|wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_uviaMinDrillLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum uVia hole:"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_uviaMinDrillLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_uviaMinDrillLabel, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxRIGHT, 5 );
m_uviaMinDrillCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_uviaMinDrillCtrl->SetToolTip( _("The minimum micro-via hole size. If set, this is an absolute minimum and cannot be reduced by netclasses, custom rules, or other settings.") );
fgFeatureConstraints->Add( m_uviaMinDrillCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP|wxBOTTOM, 5 );
m_uviaMinDrillUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, wxALIGN_LEFT );
m_uviaMinDrillUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_uviaMinDrillUnits, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_staticline111 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline111, 0, wxEXPAND|wxTOP, 10 );
m_staticline12 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline12, 0, wxEXPAND|wxTOP, 10 );
m_staticline13 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline13, 0, wxEXPAND|wxTOP, 10 );
m_staticline14 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
fgFeatureConstraints->Add( m_staticline14, 0, wxEXPAND|wxTOP, 10 );
m_staticText28 = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Silkscreen"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText28->Wrap( -1 );
fgFeatureConstraints->Add( m_staticText28, 0, wxALIGN_CENTER_HORIZONTAL|wxALL, 4 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
m_silkClearanceLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum item clearance:"), wxDefaultPosition, wxDefaultSize, 0 );
m_silkClearanceLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_silkClearanceLabel, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT, 5 );
m_silkClearanceCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_silkClearanceCtrl->SetToolTip( _("Minimum clearance between two items on the same silkscreen layer. If set this can improve legibility. (Note: does not apply to multiple shapes within a single footprint.)") );
fgFeatureConstraints->Add( m_silkClearanceCtrl, 0, wxALIGN_CENTER_VERTICAL|wxEXPAND|wxTOP, 5 );
m_silkClearanceUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_silkClearanceUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_silkClearanceUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxLEFT, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
m_textHeightLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum text height:"), wxDefaultPosition, wxDefaultSize, 0 );
m_textHeightLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_textHeightLabel, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT, 5 );
m_textHeightCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_textHeightCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP, 5 );
m_textHeightUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_textHeightUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_textHeightUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxLEFT, 5 );
fgFeatureConstraints->Add( 0, 0, 1, wxEXPAND, 5 );
m_textThicknessLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum text thickness:"), wxDefaultPosition, wxDefaultSize, 0 );
m_textThicknessLabel->Wrap( -1 );
fgFeatureConstraints->Add( m_textThicknessLabel, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxRIGHT, 5 );
m_textThicknessCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
fgFeatureConstraints->Add( m_textThicknessCtrl, 0, wxEXPAND|wxALIGN_CENTER_VERTICAL|wxTOP, 5 );
m_textThicknessUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_textThicknessUnits->Wrap( -1 );
fgFeatureConstraints->Add( m_textThicknessUnits, 0, wxALIGN_CENTER_VERTICAL|wxTOP|wxLEFT, 5 );
sbFeatureConstraints->Add( fgFeatureConstraints, 1, wxEXPAND|wxLEFT, 5 );
bScrolledSizer->Add( sbFeatureConstraints, 0, wxEXPAND|wxTOP|wxRIGHT, 5 );
bScrolledSizer->Add( 0, 0, 0, wxEXPAND|wxRIGHT|wxLEFT, 15 );
wxBoxSizer* sbFeatureRules;
sbFeatureRules = new wxBoxSizer( wxVERTICAL );
wxBoxSizer* bSizerArcToPoly;
bSizerArcToPoly = new wxBoxSizer( wxVERTICAL );
m_stCircleToPolyOpt = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Arc/circle approximated by segments"), wxDefaultPosition, wxDefaultSize, 0 );
m_stCircleToPolyOpt->Wrap( -1 );
bSizerArcToPoly->Add( m_stCircleToPolyOpt, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
wxFlexGridSizer* fgSizer2;
fgSizer2 = new wxFlexGridSizer( 0, 4, 3, 0 );
fgSizer2->AddGrowableCol( 2 );
fgSizer2->SetFlexibleDirection( wxBOTH );
fgSizer2->SetNonFlexibleGrowMode( wxFLEX_GROWMODE_SPECIFIED );
fgSizer2->Add( 15, 0, 0, 0, 5 );
m_maxErrorTitle = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Maximum allowed deviation:"), wxDefaultPosition, wxDefaultSize, 0 );
m_maxErrorTitle->Wrap( -1 );
m_maxErrorTitle->SetToolTip( _("This is the maximum distance between a circle and the polygonal shape that approximate it.\nThe error max defines the number of segments of this polygon.") );
fgSizer2->Add( m_maxErrorTitle, 0, wxALIGN_CENTER_VERTICAL|wxALIGN_LEFT|wxLEFT, 5 );
m_maxErrorCtrl = new wxTextCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxDefaultSize, 0 );
m_maxErrorCtrl->SetToolTip( _("The maximum allowed deviation between a true arc or circle and segments used to approximate it. Smaller values produce smoother graphics at the expense of performance.") );
fgSizer2->Add( m_maxErrorCtrl, 0, wxALIGN_CENTER_VERTICAL|wxALL|wxEXPAND|wxLEFT|wxRIGHT, 5 );
m_maxErrorUnits = new wxStaticText( m_scrolledWindow, wxID_ANY, _("mm"), wxDefaultPosition, wxDefaultSize, 0 );
m_maxErrorUnits->Wrap( -1 );
fgSizer2->Add( m_maxErrorUnits, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT, 5 );
bSizerArcToPoly->Add( fgSizer2, 0, wxEXPAND|wxBOTTOM, 5 );
m_stCircleToPolyWarning = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Note: zone filling can be slow when < %s."), wxDefaultPosition, wxDefaultSize, 0 );
m_stCircleToPolyWarning->Wrap( -1 );
bSizerArcToPoly->Add( m_stCircleToPolyWarning, 0, wxLEFT|wxRIGHT, 5 );
sbFeatureRules->Add( bSizerArcToPoly, 0, wxEXPAND, 5 );
m_bSizerPolygonFillOption = new wxBoxSizer( wxVERTICAL );
m_staticline1 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
m_bSizerPolygonFillOption->Add( m_staticline1, 0, wxEXPAND|wxTOP|wxBOTTOM, 12 );
m_stZoneFilledPolysOpt = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Zone fill strategy"), wxDefaultPosition, wxDefaultSize, 0 );
m_stZoneFilledPolysOpt->Wrap( -1 );
m_bSizerPolygonFillOption->Add( m_stZoneFilledPolysOpt, 0, wxTOP|wxRIGHT|wxLEFT, 5 );
wxBoxSizer* bSizer9;
bSizer9 = new wxBoxSizer( wxHORIZONTAL );
m_filletBitmap = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_filletBitmap, 0, wxALIGN_CENTER_VERTICAL|wxRIGHT|wxLEFT, 5 );
m_allowExternalFilletsOpt = new wxCheckBox( m_scrolledWindow, wxID_ANY, _("Allow fillets outside zone outline"), wxDefaultPosition, wxDefaultSize, 0 );
bSizer9->Add( m_allowExternalFilletsOpt, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
m_bSizerPolygonFillOption->Add( bSizer9, 0, wxEXPAND|wxTOP, 7 );
wxBoxSizer* bSizer111;
bSizer111 = new wxBoxSizer( wxHORIZONTAL );
m_spokeBitmap = new wxStaticBitmap( m_scrolledWindow, wxID_ANY, wxNullBitmap, wxDefaultPosition, wxDefaultSize, 0 );
bSizer111->Add( m_spokeBitmap, 0, wxRIGHT|wxLEFT|wxALIGN_CENTER_VERTICAL, 5 );
m_minResolvedSpokesLabel = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Minimum thermal relief spoke count:"), wxDefaultPosition, wxDefaultSize, 0 );
m_minResolvedSpokesLabel->Wrap( -1 );
bSizer111->Add( m_minResolvedSpokesLabel, 0, wxALIGN_CENTER_VERTICAL|wxLEFT, 5 );
m_minResolvedSpokeCountCtrl = new wxSpinCtrl( m_scrolledWindow, wxID_ANY, wxEmptyString, wxDefaultPosition, wxSize( -1,-1 ), wxSP_ARROW_KEYS, 0, 10, 0 );
bSizer111->Add( m_minResolvedSpokeCountCtrl, 0, wxALL|wxALIGN_CENTER_VERTICAL, 5 );
m_bSizerPolygonFillOption->Add( bSizer111, 1, wxEXPAND|wxTOP, 5 );
sbFeatureRules->Add( m_bSizerPolygonFillOption, 0, wxEXPAND|wxTOP, 10 );
wxBoxSizer* bSizer11;
bSizer11 = new wxBoxSizer( wxVERTICAL );
m_staticline15 = new wxStaticLine( m_scrolledWindow, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxLI_HORIZONTAL );
bSizer11->Add( m_staticline15, 0, wxEXPAND|wxTOP|wxBOTTOM, 12 );
m_staticText33 = new wxStaticText( m_scrolledWindow, wxID_ANY, _("Length tuning"), wxDefaultPosition, wxDefaultSize, 0 );
m_staticText33->Wrap( -1 );
bSizer11->Add( m_staticText33, 0, wxALL, 5 );
m_useHeightForLengthCalcs = new wxCheckBox( m_scrolledWindow, wxID_ANY, _("Include stackup height in track length calculations"), wxDefaultPosition, wxDefaultSize, 0 );
m_useHeightForLengthCalcs->SetToolTip( _("When enabled, the distance between copper layers will be included in track length calculations for tracks with vias. When disabled, via stackup height is ignored.") );
bSizer11->Add( m_useHeightForLengthCalcs, 0, wxALL, 5 );
sbFeatureRules->Add( bSizer11, 1, wxEXPAND, 5 );
bScrolledSizer->Add( sbFeatureRules, 0, wxEXPAND|wxTOP|wxRIGHT, 5 );
bScrolledSizer->Add( 0, 0, 1, wxEXPAND, 0 );
m_scrolledWindow->SetSizer( bScrolledSizer );
m_scrolledWindow->Layout();
bScrolledSizer->Fit( m_scrolledWindow );
bMainSizer->Add( m_scrolledWindow, 1, wxEXPAND, 5 );
this->SetSizer( bMainSizer );
this->Layout();
bMainSizer->Fit( this );
}
PANEL_SETUP_CONSTRAINTS_BASE::~PANEL_SETUP_CONSTRAINTS_BASE()
{
}
Reference in New Issue View Git Blame Copy Permalink