mirror of
https://gitlab.com/kicad/code/kicad.git
synced 2025-02-23 00:22:43 +00:00
This icon was only used for auto-starting a wire, which was inconsistent with auto-starting a bus or graphic line. Also the plus sign is a little confusing as it could also be interpreted as the origin marker (which is really bottom left), which is also plus-shaped. |
||
---|---|---|
.. | ||
current_probe64.xpm | ||
current_probe.xbm | ||
current_probe.xpm | ||
cursor_tune64.xpm | ||
cursor_tune.xbm | ||
cursor_tune.xpm | ||
cursor-add64.xpm | ||
cursor-add.xpm | ||
cursor-component64.xpm | ||
cursor-component.xpm | ||
cursor-eraser64.xpm | ||
cursor-eraser.xpm | ||
cursor-label-global64.xpm | ||
cursor-label-global.xpm | ||
cursor-label-hier64.xpm | ||
cursor-label-hier.xpm | ||
cursor-label-net64.xpm | ||
cursor-label-net.xpm | ||
cursor-line-bus64.xpm | ||
cursor-line-bus.xpm | ||
cursor-line-graphic64.xpm | ||
cursor-line-graphic.xpm | ||
cursor-line-wire64.xpm | ||
cursor-line-wire.xpm | ||
cursor-measure64.xpm | ||
cursor-measure.xpm | ||
cursor-pencil64.xpm | ||
cursor-pencil.xpm | ||
cursor-place64.xpm | ||
cursor-place-black64.xpm | ||
cursor-place-black.xpm | ||
cursor-place.xpm | ||
cursor-select-lasso64.xpm | ||
cursor-select-lasso.xpm | ||
cursor-select-m64.xpm | ||
cursor-select-m-black64.xpm | ||
cursor-select-m-black.xpm | ||
cursor-select-m.xpm | ||
cursor-select-window64.xpm | ||
cursor-select-window.xpm | ||
cursor-subtract64.xpm | ||
cursor-subtract.xpm | ||
cursor-text64.xpm | ||
cursor-text.xpm | ||
cursor-xor64.xpm | ||
cursor-xor.xpm | ||
cursor-zoom-in64.xpm | ||
cursor-zoom-in.xpm | ||
cursor-zoom-out64.xpm | ||
cursor-zoom-out.xpm | ||
README.md | ||
voltage_probe64.xpm | ||
voltage_probe.xbm | ||
voltage_probe.xpm |
The following cursors were borrowed from the Inkspace project https://gitlab.com/inkscape/inkscape/
- cursor-connector.xpm
- cursor-eraser.xpm
- cursor-measure.xpm
- cursor-pencil.xpm
- cursor-select-m.xpm
- cursor-text.xpm
- cursor-zoom.xpm
- cursor-zoom-out.xpm