mirror of
https://github.com/oresat/oresat-star-tracker-hardware.git
synced 2024-12-12 09:05:38 +00:00
8b1ee92ea7
* added SD and eMMC to design, cleaned up repo * put my schematic onto the current proto card and arranged some things * major progress on camera board * some final touchs, think it's ready for review * delete unecessary file * removed another unnecessary file * renaming * small aesthetic changes * no copper under screw heads * rerouted camera bus * minor route nudge * fixed XO footprint, filleted edges * removed wire stub * some small length matching * moved some traces * added i2c pullups * fixed some ERC errors
8 lines
373 B
Plaintext
8 lines
373 B
Plaintext
- tie USB VB to 5v
|
|
- tie USB ID to gnd
|
|
- add optional pullups to i2c bus
|
|
- breakout points on CAN transciever should by 2.54mm spacing
|
|
- label signals on solder jumpers on bottom.
|
|
- pull(up/down) resistors on the control signal jumpers so when they are connected to the beagle they don't accidentally shorts pins to VCC or GND
|
|
- add GND pin on parallel bus breakout header
|