Mena Labib 37f6ce7ce8 HW-84 Center Console Rev 3 (#87) ...

* HW-84 first commit.

* HW-84 Center Console Rev3
shcematic complete for design without rPi. Need regulator to add rPi.
parts added to library:
8channel logic driver
16 & 4 pin micro-fit connectors
1 channel schmitt trigger
net tie

* HW-84 Center Console
Library additions:
Regulator, 47uF CAP, 3.3uH ind
Schematic is essentially complete, some weird issue with footprints on
U2 and U5...?

* same as prev commit

* HW-84 Center Console

First draft of board layout. Routing still needs to be done.

* HW-84 Center Console Rev 3
- Completed preliminary routing (11/126 nets remaining)

TODO
- Finish routing for the regulator
- Consider PDN for 5V rail
- Optimize i2c/UART routing
- Add Pi model to check for clearance (battery)

Library Changes
- Added FAN AXIAL 30x10mm

* HW-84 Center Console Rev 3

- Finished routing all nets

Library Changes
- Updated FAN 30x10mm with 29mm hole
- Fixed CONN 40POS RASPBERRY PI schematic symbol with correct pin out

* HW-84 Center Console Rev 1
- Fixed schematic naming and numbering
- Created output files

* HW-84
- Regenerated BOM file to properly group components by LibRef

* merge conflict

* Adding pull-ups to buttons

* HW 84 Driver Controls Center Console Rev2
Added pull-ups to all buttons. Added BPS LED. Added series resistor at
output of regulator. Added bulk cap at input of regulator

* HW 84 Center Console Board
Fixed some traces on PCB to not break up bottom layer

* HW 84 Center Console Board
Fix Footrpints. Fix 3V3 trace. Fix bulk cap and series resistor

* footprints mentioned in oprev commit

* HW 84 Center Console Board
Added Standoffs. The footprint's messed up...

* HW-84 Center Console Rev 3
- Moved pull-up resistors to the top layer
- Added thermal vias to the regulator's ground plane

TODO
- Review layout
- Double check pi connections

Library Changes
- Changed STANDOFF 2.5MM to have a 3D model on Mechanical 1 instead of
Assembly layer

* fixed silkscreens

* HW-84 Center Console Rev 3
- Connected the EN for the 5V regulator to the microcontroller with a
pull down
- Regenerated output files

* HW-84 Center Console Rev 3
- Created zip file for outputs
- Moved old outputs to a new folder

* Clean up from bring-up issues. 6-channel schmitt is now fixed for BOM

* Center Console Rev3: merged libraries

* for previous commit

* Fixing 6ch schmitt footprint... again

* HW-84 Center Console Rev 3 Merge commit
Things that I changed while merging:
RELAY SPST 12V 8A: footprint linked
6-channel schmitt
1-channel schmitt
IC OP AMP GEN PURPOSE RR 5.5MHZ SOT-23-5
IDEAL DIODE

* Re-did Library changes from HW-118, HW-141, HW-160 & PR#77
based on HW-169 branch

2019-05-13 18:33:41 -04:00

19 MiB

Raw Permalink History

View Raw