* HW-84 first commit.
* HW-84 Center Console Rev3
shcematic complete for design without rPi. Need regulator to add rPi.
parts added to library:
8channel logic driver
16 & 4 pin micro-fit connectors
1 channel schmitt trigger
net tie
* HW-84 Center Console
Library additions:
Regulator, 47uF CAP, 3.3uH ind
Schematic is essentially complete, some weird issue with footprints on
U2 and U5...?
* same as prev commit
* HW-84 Center Console
First draft of board layout. Routing still needs to be done.
* HW-84 Center Console Rev 3
- Completed preliminary routing (11/126 nets remaining)
TODO
- Finish routing for the regulator
- Consider PDN for 5V rail
- Optimize i2c/UART routing
- Add Pi model to check for clearance (battery)
Library Changes
- Added FAN AXIAL 30x10mm
* HW-84 Center Console Rev 3
- Finished routing all nets
Library Changes
- Updated FAN 30x10mm with 29mm hole
- Fixed CONN 40POS RASPBERRY PI schematic symbol with correct pin out
* HW-84 Center Console Rev 1
- Fixed schematic naming and numbering
- Created output files
* HW-84
- Regenerated BOM file to properly group components by LibRef
* merge conflict
* Adding pull-ups to buttons
* HW 84 Driver Controls Center Console Rev2
Added pull-ups to all buttons. Added BPS LED. Added series resistor at
output of regulator. Added bulk cap at input of regulator
* HW 84 Center Console Board
Fixed some traces on PCB to not break up bottom layer
* HW 84 Center Console Board
Fix Footrpints. Fix 3V3 trace. Fix bulk cap and series resistor
* footprints mentioned in oprev commit
* HW 84 Center Console Board
Added Standoffs. The footprint's messed up...
* HW-84 Center Console Rev 3
- Moved pull-up resistors to the top layer
- Added thermal vias to the regulator's ground plane
TODO
- Review layout
- Double check pi connections
Library Changes
- Changed STANDOFF 2.5MM to have a 3D model on Mechanical 1 instead of
Assembly layer
* fixed silkscreens
* HW-84 Center Console Rev 3
- Connected the EN for the 5V regulator to the microcontroller with a
pull down
- Regenerated output files
* HW-84 Center Console Rev 3
- Created zip file for outputs
- Moved old outputs to a new folder
* Clean up from bring-up issues. 6-channel schmitt is now fixed for BOM
* Center Console Rev3: merged libraries
* for previous commit
* Fixing 6ch schmitt footprint... again
* HW-84 Center Console Rev 3 Merge commit
Things that I changed while merging:
RELAY SPST 12V 8A: footprint linked
6-channel schmitt
1-channel schmitt
IC OP AMP GEN PURPOSE RR 5.5MHZ SOT-23-5
IDEAL DIODE
* Re-did Library changes from HW-118, HW-141, HW-160 & PR#77
based on HW-169 branch
37f6ce7ce8