uw-midsun-hardware/Controller-Board.PrjPcbStructure at master - uw-midsun-hardware - AllSpice Hub

AllSpiceMirrors/uw-midsun-hardware

mirror of https://github.com/uw-midsun/hardware.git synced 2025-01-10 07:14:46 +00:00

Titus Chow 487cdcbb26 ELEC-225: Controller Board Rev5 (#29 )

* ELEC-149: Hopefully updated component links properly

* ELEC-149: Fixed schematic components

* ELEC-149: Fixed 510R for LEDs

* ELEC-149: Updated PcbDoc, removed panelized

* ELEC-149: Fixed last 510R

* ELEC-225: Completed layout for new regulator

Also switched to vertical DuraCliks, removed LSE, removed a decoupling cap from the CAN transceiver.

Added footprints:
- RES ARRAY 4 POS 0804
- DIODE SCHOTTKY 30V 1A POWERDI123

Modified symbol:
- DIODE TVS 24VWM 70VC SOT23

Added symbols:
- IC DCDC 3.3V 0.5A 4-SMD
- DIODE SCHOTTKY 30V 1A POWERDI123

* ELEC-225: Renamed PcbDoc and removed Rev4

* ELEC-225: Added PcbDoc to project, added bulk cap

* ELEC;225: Moved DCDC over, added keepout on edge, added 0805 bulk caps

Added symbol:
- CAP CER 10uF 25V 10% X5R 0805

* ELEC-225: Removed keepout circles

* ELEC-225: Fixed silkscreen, added STEP file

* ELEC-225: Cleaned up silkscreen, adjusted components to fit grid

* ELEC-225: Added silkscreen to J1`

* ELEC-225: Added thermals, updated STEP model

* ELEC-225: Added thermals to LDO

* ELEC-225: Rev5.1: Increased all trace widths to 10mil

* ELEC-225: Double-checked merge

* ELEC-225: Fixed LED that moved during merge

* ELEC-225: Forgot to save things?

* ELEC-225
- Added Titus Chow to Schematic Authors
- Changed revision to 5.1
- Changed keepout to 0.6mm width
- Generated gerber files, nc drill file, pdf, and 3d stp model

2017-07-19 17:03:56 -04:00

2 lines

63 B

Plaintext

Raw Permalink Blame History

Record=TopLevelDocument|FileName=Controller_Board_Main.SchDoc