c385a12779
* HW-141 Controller Board Rev 7 - Added ESD diode to both connectors and updated to fixed schematic symbol - Changed decoupling scheme to match recommended one in the datasheet - Deleted 3V0 LDO and switched to FB + cap filter for 3V3A instead - Switched to a smaller regulator Library - Modified CAN transceiver schematic symbol to change pin order - Added CAP CER 10uF 50V 1206 - Added CAP CER 47uF 6.3V 1206 - Added IC DCDC 3.3V 1A 10-uSIP - Added FB 600 OHM 1LN 0603 * HW-141 Controller Board Rev 7 - Added ideal diode circuit for the on board regulator, and a normal diode for the programmer - Finished schematic and routing TODO - What happens if both power sources are connected? Library Changes - Added CRYSTAL 32 MHZ 18PF 2-SMD - Added IC IDEAL DIODE SOT23-5 * HW-141 Controller Board Rev 7 - Added updated PCB file * HW-141 Controller Board Rev 7 - Fixed silkscreen - Moved traces away from the keepouts for the mounting holes * HW-141 Controller Board Rev 7 - Modified layout for the decoupling capacitors TODO - Change logo to MSXIV * Added a note to not used LED pins unless absolutely necessary * HW-141 Controller Board Rev 7 - Changed termination capacitor to 4n7 - Generated output files and PDF Library Changes - Added CAP CER 4.7nF X7R 0603 * Updated libraries from master |
||
|---|---|---|
| .. | ||
| Controller_Board.pdf | ||
| Controller_Board_Rev6_7.step | ||
| Controller_Board_Rev6_7.xlsx | ||
| Controller_Board_Rev6_7.zip | ||