mirror of
https://github.com/uw-midsun/hardware.git
synced 2024-11-30 08:51:36 +00:00
c385a12779
* HW-141 Controller Board Rev 7 - Added ESD diode to both connectors and updated to fixed schematic symbol - Changed decoupling scheme to match recommended one in the datasheet - Deleted 3V0 LDO and switched to FB + cap filter for 3V3A instead - Switched to a smaller regulator Library - Modified CAN transceiver schematic symbol to change pin order - Added CAP CER 10uF 50V 1206 - Added CAP CER 47uF 6.3V 1206 - Added IC DCDC 3.3V 1A 10-uSIP - Added FB 600 OHM 1LN 0603 * HW-141 Controller Board Rev 7 - Added ideal diode circuit for the on board regulator, and a normal diode for the programmer - Finished schematic and routing TODO - What happens if both power sources are connected? Library Changes - Added CRYSTAL 32 MHZ 18PF 2-SMD - Added IC IDEAL DIODE SOT23-5 * HW-141 Controller Board Rev 7 - Added updated PCB file * HW-141 Controller Board Rev 7 - Fixed silkscreen - Moved traces away from the keepouts for the mounting holes * HW-141 Controller Board Rev 7 - Modified layout for the decoupling capacitors TODO - Change logo to MSXIV * Added a note to not used LED pins unless absolutely necessary * HW-141 Controller Board Rev 7 - Changed termination capacitor to 4n7 - Generated output files and PDF Library Changes - Added CAP CER 4.7nF X7R 0603 * Updated libraries from master
17 lines
1.3 KiB
Plaintext
17 lines
1.3 KiB
Plaintext
----------------------------------------------------------------------------------------------------------------------------------
|
|
NCDrill File Report For: Controller_Board.PcbDoc 2019-03-17 6:35:40 PM
|
|
----------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
Layer Pair : Top Layer to Bottom Layer
|
|
ASCII RoundHoles File : Controller_Board_7.0.TXT
|
|
|
|
Tool Hole Size Hole Tolerance Hole Type Hole Count Plated Tool Travel
|
|
----------------------------------------------------------------------------------------------------------------------------------
|
|
T1 12mil (0.3mm) Round 105 PTH 0.00inch (0.00mm)
|
|
T2 28mil (0.7mm) +2mil (0.05mm)/-0mil (0mm) Round 2 PTH 0.00inch (0.00mm)
|
|
T3 106mil (2.7mm) Round 4 PTH 0.00inch (0.00mm)
|
|
----------------------------------------------------------------------------------------------------------------------------------
|
|
Totals 111
|
|
|
|
Total Processing Time (hh:mm:ss) : 00:00:00
|