mirror of
https://github.com/uw-midsun/hardware.git
synced 2024-11-30 08:51:36 +00:00
c385a12779
* HW-141 Controller Board Rev 7 - Added ESD diode to both connectors and updated to fixed schematic symbol - Changed decoupling scheme to match recommended one in the datasheet - Deleted 3V0 LDO and switched to FB + cap filter for 3V3A instead - Switched to a smaller regulator Library - Modified CAN transceiver schematic symbol to change pin order - Added CAP CER 10uF 50V 1206 - Added CAP CER 47uF 6.3V 1206 - Added IC DCDC 3.3V 1A 10-uSIP - Added FB 600 OHM 1LN 0603 * HW-141 Controller Board Rev 7 - Added ideal diode circuit for the on board regulator, and a normal diode for the programmer - Finished schematic and routing TODO - What happens if both power sources are connected? Library Changes - Added CRYSTAL 32 MHZ 18PF 2-SMD - Added IC IDEAL DIODE SOT23-5 * HW-141 Controller Board Rev 7 - Added updated PCB file * HW-141 Controller Board Rev 7 - Fixed silkscreen - Moved traces away from the keepouts for the mounting holes * HW-141 Controller Board Rev 7 - Modified layout for the decoupling capacitors TODO - Change logo to MSXIV * Added a note to not used LED pins unless absolutely necessary * HW-141 Controller Board Rev 7 - Changed termination capacitor to 4n7 - Generated output files and PDF Library Changes - Added CAP CER 4.7nF X7R 0603 * Updated libraries from master
31 lines
1.8 KiB
Plaintext
31 lines
1.8 KiB
Plaintext
------------------------------------------------------------------------------------------
|
|
Gerber File Extension Report For: Controller_Board_7.0.GBR 2019-03-17 6:35:39 PM
|
|
------------------------------------------------------------------------------------------
|
|
|
|
|
|
------------------------------------------------------------------------------------------
|
|
Layer Extension Layer Description
|
|
------------------------------------------------------------------------------------------
|
|
.GTO Top Overlay
|
|
.GTP Top Paste
|
|
.GTS Top Solder
|
|
.GTL Top Layer
|
|
.G1 L2 (GND)
|
|
.G2 L3 (PWR)
|
|
.GBL Bottom Layer
|
|
.GBS Bottom Solder
|
|
.GBP Bottom Paste
|
|
.GBO Bottom Overlay
|
|
.GM16 Mechanical 16
|
|
.GM15 Mechanical 15
|
|
.GM14 Route Tool Path
|
|
.GM13 Mechanical 13
|
|
.GM11 Courtyard Top
|
|
.GM9 Assembly Top
|
|
.GM4 Mechanical 4
|
|
.GM1 Mechanical 1
|
|
.GKO Keep-Out Layer
|
|
.GPT Top Pad Master
|
|
.GPB Bottom Pad Master
|
|
------------------------------------------------------------------------------------------
|