mirror of
https://github.com/uw-midsun/hardware.git
synced 2024-11-30 08:51:36 +00:00
c385a12779
* HW-141 Controller Board Rev 7 - Added ESD diode to both connectors and updated to fixed schematic symbol - Changed decoupling scheme to match recommended one in the datasheet - Deleted 3V0 LDO and switched to FB + cap filter for 3V3A instead - Switched to a smaller regulator Library - Modified CAN transceiver schematic symbol to change pin order - Added CAP CER 10uF 50V 1206 - Added CAP CER 47uF 6.3V 1206 - Added IC DCDC 3.3V 1A 10-uSIP - Added FB 600 OHM 1LN 0603 * HW-141 Controller Board Rev 7 - Added ideal diode circuit for the on board regulator, and a normal diode for the programmer - Finished schematic and routing TODO - What happens if both power sources are connected? Library Changes - Added CRYSTAL 32 MHZ 18PF 2-SMD - Added IC IDEAL DIODE SOT23-5 * HW-141 Controller Board Rev 7 - Added updated PCB file * HW-141 Controller Board Rev 7 - Fixed silkscreen - Moved traces away from the keepouts for the mounting holes * HW-141 Controller Board Rev 7 - Modified layout for the decoupling capacitors TODO - Change logo to MSXIV * Added a note to not used LED pins unless absolutely necessary * HW-141 Controller Board Rev 7 - Changed termination capacitor to 4n7 - Generated output files and PDF Library Changes - Added CAP CER 4.7nF X7R 0603 * Updated libraries from master
21 lines
282 B
Plaintext
21 lines
282 B
Plaintext
G04*
|
|
G04 #@! TF.GenerationSoftware,Altium Limited,Altium Designer,19.0.10 (269)*
|
|
G04*
|
|
G04 Layer_Color=0*
|
|
%FSLAX25Y25*%
|
|
%MOIN*%
|
|
G70*
|
|
G01*
|
|
G75*
|
|
%ADD88C,0.00197*%
|
|
D88*
|
|
X78937Y80020D02*
|
|
Y97342D01*
|
|
X93110Y80020D02*
|
|
Y97342D01*
|
|
X78937Y80020D02*
|
|
X93110D01*
|
|
X78937Y97342D02*
|
|
X93110D01*
|
|
M02*
|