mirror of
https://github.com/uw-midsun/hardware.git
synced 2024-11-23 07:05:05 +00:00
2c211c39a1
* ELEC-191 Power Distribution Rev 1.7. Added EN to PA15 of the controller board. * ELEC-191 Started PCB layout. Organized all components into sections. PCB Library Changes: | CONN 2POS 0.1" JUMPER: Fixed issue where both pins had the designator 1 * ELEC-191 Changed pinout for 6 pin connectors to help layout. TODO: Complete layout. * ELEC-191 Updated front and roof enclosure schematic. * ELEC-191 Began layout for chaos. Created polygon pours for power. * ELEC-191 Chaos. Added pull up/down resistors for EN and SHDN in schematic. Routed all traces. Need to fix pours.' * ELEC-191 Finished routing and ground pours. Have to fix 2 pin ultrafit footprint, and resize PCB * ELEC-191 Power Distribution Rev 1.8. Added test points to power rails. Fixed all DRCs regarding unconnected nets. Resized board. Library Changes: SchLib * Changed link for CONN 2POS ULTRAFIT and CONN 2POS ULTRAFIT NATURAL COLOR to solder cup versions PCBLib * Fixed footprint and silkscreen for CONN 2POS ULTRAFIT and CONN 2POS ULTRAFIT NATURAL COLOR * ELEC-191 Added vias to stich top and bottom ground layers on PCB. Added silkscreen on the bottom for all the connector pins. * ELEC-191 Fixed ground pour. Improved on silkscreen for labels * ELEC-87 Updated components from library. Fixed 12V connector footprint * ELEC-87 Fixed ground pours * ELEC-87 Added M2.5 mounting holes to the board * ELEC-87 Brought the pins out such that everything is accessible when the controller board is on. * ELEC-87 Controller Breakout Rev 2.3. Flipped ultrafit to bottom layer. Moved bottom breakout header to align with the perf board secion. * ELEC-87 Generated gerber, drill and pdf * ELEC-87 Fixed DRCs on PCB * ELEC-87: Used master's copy for all other projects * ELEC-87 Deleted old breakout PCB files. Only have the current 5x5 one in the project now * Renamed folder to follow conventions
2 lines
318 B
Plaintext
2 lines
318 B
Plaintext
Mezzanine_Interface=PA10,PA9,PA8,PB15/SPI2_MOSI,PB14/SPI2_MISO,PB13/SPI2_SCK,PB12/SPI2_NSS,PB11/USART3_RX/I2C2_SDA,PB10/USART3_TX/I2C2_SCL,PB2,PB1,PB0,PA7/SPI1_MOSI,PA6/SPI1_MISO,PA5/SPI1_SCK,PA4/SPI1_NSS,PA3/USART2_RX,PA2/USART2_TX,PA1,PA0,PA15,PB3,PB4,PB5,PB6/USART1_TX,PB7/USART1_RX,PB8/I2C1_SCL,PB9/I2C1_SDA,PC13
|