* ELEC-472 Power Distribution Rev 3
- Seperated inputs and power path into seperate schematics
- Added a parallel FET to the powerpath
- Added new current sensing that should be more accurate
Library Changes
- RES 0.004 OHM 1% 7W 5931
- RES 0.007 OHM 1% 7W 2818
- Modified MOSFET P-CH DUAL 30V 60A PPAK SO-8
- IC CURRENT AMPLIFIER INA240A1 20V/V 8-TSSOP
TODO:
- Implement soft start to the LTC
- Add output capacitance?
- Use HSDs and modify outputs to match current harnessing
- Add extra outputs
- Layout
* ELEC-472 Power Distribution Rev 3
- Began to add new sheets with load switches for outputs
- Modified current sense to be unidirectional for aux bat
Library Changes
- RES 0.015 Ohm 7W 3818
- CAP CER 0.068UF 10% 50V X7R 0603
- RES 2.21K OHM 1% 1/10W 0603
- Modified footprint of DIODE SHOCKTTKY 30V 1A POWERDI123
- Added CAP ALUM 47UF 35V 6.3MM
-
* ELEC-472 Power Distribution Rev 3
- Added HSDs for switching instead of FETs
- Reannotated schematic
TODO:
- Add pull downs to everything
- Resistor array for LEDs and pull downs
- PCB Layout
* ELEC-472 Power Distribution
- Added LEDs and pull downs
- Began PCB layout
Library
- CAP ALUM 100UF 35V
- RES ARRAY 10K 4RES 0804
- Modified LED YELLOW CLEAR 2.1V 0603
- Test Point 0603 SMD
- Modified footprint of ATO fuse holder to include 3D models
* ELEC-472 Power Distribution Rev 3
- Placed all components onto PCB
- Size is now 120x100mm
Library
- Added CONN 4POS 2 ROW ULTRAFIT 0.138"
* ELEC-472 Power Distribution
- Deleted unused files
* ELEC-472 Power Distribution Rev 3
- Finished PCB layout
- TODO: Review and generate gerbers
* Added PDF
* ELEC-472 Power Distribution Rev 3
- Generated output files
* Updated libraries from master
0a31e90852