mirror of
https://github.com/uw-midsun/hardware.git
synced 2024-11-27 08:10:30 +00:00
e3a887a65b
* Restructured scheamtics * ELEC-364 Pre Charge Rev 3 - Added comparator simulation * ELEC-364 Precharge rev. 3 - Added discharge circuit - Refactored precharge circuit Library changes: IC REG SWTCHD CAP INV 20MA 8SOIC RES 18 OHM 100W 5% TO-247 RES 330 OHM 100W 5% TO-247 MOSFET N-CH 60V 1.6A SOT-23 MOSFET N-CH 650V 8A X2 TO-263 MOSFET P-CH 500V 10A 300W TO-263 MOSFET N-CH 500V 6A TO247 * Updated relay circuit, high voltage section, created logic schematic (AND gate, comparator) Added: Diode Standard 800V 8A Surface Mount SMC IC INVERTER SCHMITT 1CH 5SSOP MOSFET P-CH 60V 3A SOT223 MOSFET P-CH 30V 4A 1.6W SOT-23-6 MOSFET N-CH 60V 1.6A SOT-23 * ELEC-364 Precharge Rev 3 - Finished schematic for precharge - Scaled SR Latch schematic model - Added input pins to inverter schematic model - Added capacitor to main relay - Added TVS diodes - Changed HV connector - Biased the voltage divider * Fixed connection issues, added footprints for inverter and TO-247 * Fixed errors in schematic, added heatsink footprints, added and organized components onto PCB. Time to route. * Cleaned up PCB and schematic * Finished PCB, added new test points, added 1206 package resistors (470k,29.4k, 2k,0), fixed mostfet footprint orientation * ELEC-364 Precharge Rev 3.0 - Added gerber, PDF, and STEP file - Added silkscreen to the board for the isolated section * Updated libraries from master
3 lines
205 B
Plaintext
3 lines
205 B
Plaintext
Layer Pairs Export File for PCB: C:\Users\Taiping\Documents\MidnightSun\hardware\MSXII_PreChargeController\PreCharge.PcbDoc
|
|
LayersSetName=Top_Bot_Thru_Holes|DrillFile=precharge_3.0.txt|DrillLayers=gtl,gbl
|