mirror of
https://github.com/uw-midsun/hardware.git
synced 2025-01-10 07:14:46 +00:00
60fcada8b9
* HW-204 updated schematics with new ADC * HW-204 Changed tantalum capacitors to ceramic, and changed C13 from 0.1 uF to 1 uF. * HW-204 BMS Current Sense Rev 3.0 Added separate capacitors to AVDD and DVDD, and changed the reference voltage to 2.5 V * HW-204 BMS Current Sense Rev 3.0 Added a buffer to the ADC input, changed the INA240 reference to 2.5 V, and added resistors and capacitor to the ADC inputs * HW-204 BMS Current Sense Rev 3.0 Added 22 nF decoupling capacitors to the ADC DVDD and AVDD * HW-204 BMS Current Sense Rev 3.0 Added MSOP component for LTC6820, separated supply for VDD and VDDS for LTC6820, and set EN low * HW-204 BMS Current Sense Rev 3.0 Added pull-up resistor to ADC DO, and annotated the schematics * HW-204 BMS Current Sense Rev 3.0 Updated the project parameters, started the board layout, and added a MSXIV logo to the library * HW-204 BMS Current Sense Rev 3.0 Replaced MSXII with MSXIV in the project folder name * HW-204 BMS Current Sense Rev 3.0 Added the datasheet to the ADC properties * HW-204 BMS Current Sense Rev 3.0 * HW-204 BMS Current Sense Rev 3.0 Switched the termination resistor to split termination, and added the component parameters for the ADC * HW-204 Current Sense Adjusted the positions of VREF and IN+ testpoints * HW-204 Current Sense Adjusted some of the traces and testpoints * HW-204 Current Sense Changed revision to MSXIV 1.0 * HW-204 BMS Current Sense Rev 1.0 Added the output job files * HW-204 BMS Current Sense Rev 1.0 Modified the output job files * regenerated gerber files * regenerated BOM * HW-204 BMS Current Sense Rev 1.0 Reorganized the files into MSXII and MSXIV folders
2 lines
393 B
Plaintext
2 lines
393 B
Plaintext
Mezzanine_Interface=PA10,PA9,PA8,PB15/SPI2_MOSI,PB14/SPI2_MISO,PB13/SPI2_SCK,PB12/SPI2_NSS,PB11/USART3_RX/I2C2_SDA,PB10/USART3_TX/I2C2_SCL,PB2,PB1/AN9,PB0/AN8,PA7/AN7/SPI1_MOSI,PA6/AN6/SPI1_MISO,PA5/AN5/SPI1_SCK,PA4/AN4/SPI1_NSS,PA3/AN3/USART2_RX,PA2/AN2/USART2_TX,PA1/AN1,PA0/AN0,PA15/LED_RED,PB3/LED_GREEN,PB4/LED_BLUE,PB5/LED_BLUE,PB6/USART1_TX,PB7/USART1_RX,PB8/I2C1_SCL,PB9/I2C1_SDA,PC13
|