mirror of
https://github.com/uw-midsun/hardware.git
synced 2025-01-10 15:24:24 +00:00
fd5128306e
* master now has updated libraries * schematic update with LTC IC * added BMS system and updated schematics * Initial commit * Adding balance wires and resistors to battery module connector schematic * update the PCB Rev2 for AUX charger * changed track sizes, added labelling and logo * Adding new fuses and footprints * refine the connection of R5 and thermal relief for U1 * add the setting file * update the project output * initial layout * Finishing routing with improved layout * Adding polygon pour and silkscreen * fixing fuse alignment * update the library * generated BOM correctly * fixed parameters on library components * Changing components to LCSC parts * Adding keepout * redesigned board to add microfit right angle connectors, properly define the resistors and change the pin layout on the connectors, regenerate BOM and gerbers * edited schematic file * added new components for merge with master * added new components to new master updated libraries * trying to merge * combined with master libraries * 'Merge' aux branch with master * new branch to merge motor controller with master * 'Merge' motor controller interface with master Co-authored-by: Chenao Yuan <yca423@hotmail.com> Co-authored-by: lsprophe <44761966+lsprophe@users.noreply.github.com>
25 lines
2.2 KiB
Plaintext
25 lines
2.2 KiB
Plaintext
----------------------------------------------------------------------------------------------------------------------------------
|
|
NCDrill File Report For: PreCharge.PcbDoc 2018-06-22 1:56:16 AM
|
|
----------------------------------------------------------------------------------------------------------------------------------
|
|
|
|
Layer Pair : Component Side to Bottom Layer
|
|
ASCII RoundHoles File : PreCharge_3.0.TXT
|
|
|
|
Tool Hole Size Hole Tolerance Hole Type Hole Count Plated Tool Travel
|
|
----------------------------------------------------------------------------------------------------------------------------------
|
|
T1 12mil (0.3mm) Round 50 PTH 0.00inch (0.00mm)
|
|
T2 24mil (0.6mm) Round 1 PTH 0.00inch (0.00mm)
|
|
T3 40mil (1.02mm) +/-2mil (0.04mm) Round 11 PTH 0.00inch (0.00mm)
|
|
T4 51mil (1.3mm) Round 3 PTH 0.00inch (0.00mm)
|
|
T5 77mil (1.95mm) Round 1 PTH 0.00inch (0.00mm)
|
|
T6 87mil (2.2mm) Round 2 PTH 0.00inch (0.00mm)
|
|
T7 89mil (2.25mm) Round 12 PTH 0.00inch (0.00mm)
|
|
T8 91mil (2.3mm) +/-2mil (0.04mm) Round 3 PTH 0.00inch (0.00mm)
|
|
T9 91mil (2.3mm) Round 3 PTH 0.00inch (0.00mm)
|
|
T10 106mil (2.7mm) Round 6 PTH 0.00inch (0.00mm)
|
|
T11 109mil (2.775mm) Round 4 PTH 0.00inch (0.00mm)
|
|
----------------------------------------------------------------------------------------------------------------------------------
|
|
Totals 96
|
|
|
|
Total Processing Time (hh:mm:ss) : 00:00:00
|