AllSpice demonstration repo
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
AllSpiceUser aec58ab790 Merge pull request 'Fix reference designator position and alignment' (#23) from develop into main 1 month ago
.allspice Add check for correct branch 5 months ago
Firmware@2f9e3b771e Add firmware submodule 2 years ago
.gitattributes Add linguist detectable to *.cmp 2 months ago
.gitignore add *.gif to .gitignore 1 month ago
.gitmodules Add descriptions to submodules 5 months ago
Archim.OutJob Capture new outjob 2 months ago
Archimajor.PcbDoc Increase width of +5V trace 2 months ago
Archimajor.PrjPcb Create variant to test range of motion 5 months ago
Archimajor.SchDoc Increase size of subckt labels 2 months ago
Archimajor.csv Add ESD protection to endstops 5 months ago
Connectors.SchDoc Increase motor label size for readability 2 months ago
EndStops.SchDoc Remove extra endstop channel 2 months ago
Fans.SchDoc Remove MCU control of fan 2 2 months ago
Microcontroller.SchDoc Align input buffers 2 months ago
Mosfets.SchDoc Remove mosfet ch, change R30 to 10K 1 month ago
Motors.SchDoc Move testpoints for readability 2 months ago
Power.SchDoc Increase size of subckt labels 2 months ago
README.md Update 'README.md' 1 month ago
Thermistors.SchDoc Align thermister channels for readability 2 months ago
Thermocouples.SchDoc Move layout notes for readability 2 months ago
USB.SchDoc Increase bias current for optofet 2 months ago
cern_ohl_v_1_2.md Add URL to license 2 months ago

README.md

Archimajor

Summary

3D printer motherboard, designed by Ultimachine. Features include:

  • 5x integrated 256 microstep motor drivers
  • 6x PWM Mosfet outputs
  • 4x thermistor inputs
  • SPI (Serial Peripheral Interface)
  • ** Removed infinite loop on self-calibration.
  • ** Added open load test

Specifications

General Specifications

Input Power Supply: 12V - 24V DC, 16A+

Operating Temperature Range (est.): 0dC ~ 70dC

Firmware

Source

Binary

Bill of Materials

Archimajor.csv

Note

Changed heat bed fuse holder to yellow to differentiate channels.

Disclaimer

*NOTE: This does not represent actual data from the Rambo/Archimajor PCBA