gitified_old_clb_svn/hw/FMC_SoftPLL/PCB/LogFiles/ODBPPOut.txt

                           Expedition PCB ODBPP Output
                           ---------------------------

                       03:22 PM Monday, February 25, 2013
  Job Name: P:\App\KM3Net\CLB\CLBv2\mentor_wd\schema\FMC_SoftPLL\PCB\Board1.pcb


Configuration file found. Using the following settings.
        Output User Layers 
        Output User Layers 
        Using Assembly Outline for package outline
        Remove NFP Pins: None
        Remove NFP Vias: None
        Units: Metric
        Read DRC Features
        Round Corners
        Compress job
        Use Generate SilkScreen Data
        Output Board Outline

Output Dir: P:\App\KM3Net\CLB\CLBv2\mentor_wd\schema\FMC_SoftPLL\PCB\Output\
Output Job Name: et-number.odb
Processing Board Outline
Processing Layer Information
Processing Symbols
Processing Packages
    WARNING: No graphics found on layer Assembly Outline for cell MTG280_600.  Using placement outline.
    WARNING: No graphics found on layer Assembly Outline for cell TEST_C170H100-1_ET.  Using placement outline.
    WARNING: No graphics found on layer Assembly Outline for cell TEST_C170H100-1_NoSilk_ET.  Using placement outline.
    WARNING: No graphics found on layer Assembly Outline for cell TEST_C170H100-1_NoSilk_NoRefDes_ET.  Using placement outline.
    WARNING: No graphics found on layer Assembly Outline for cell LI 06 LAYERS.  Using placement outline.
    WARNING: No graphics found on layer Assembly Outline for cell nikhef_logo_12x5mm.  Using placement outline.
    WARNING: No graphics found on layer Assembly Outline for cell nikhef_logo_27x12mm_drawing.  Using placement outline.
Processing Components
        No Reference Designator Found - Using NRD0
        Changing Part Number Part No to Part_No
        No Reference Designator Found - Using NRD1
        Changing Part Number Part No to Part_No
        No Reference Designator Found - Using NRD2
        Changing Part Number Part No to Part_No
Processing Nets
Processing Nets
Processing Layer Information
Processing Feature Section
    Processing Via Pads
    Processing Fiducials
    Processing Traces
    Processing Component Pads
    Processing Positive Planes
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    WARNING: Since the starting (1.3385828,2.4803149)(mm) and the ending (1.3385825,2.4803150)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. 
    Hence this arc is approximated to a line.
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    Processing Negative Plane Data
    Processing Thieving Data
    Processing Resistor Shapes
    Processing Conductive Shapes
    Processing RF Conductive Shapes
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Traces
    Processing Component Pads
    Processing Positive Planes
    ActualPlaneShape
    Processing Negative Plane Data
    Processing Thieving Data
    Processing Resistor Shapes
    Processing Conductive Shapes
    Processing RF Conductive Shapes
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Traces
    Processing Component Pads
    Processing Positive Planes
    Processing Negative Plane Data
    Processing Thieving Data
    Processing Resistor Shapes
    Processing Conductive Shapes
    Processing RF Conductive Shapes
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Traces
    Processing Component Pads
    Processing Positive Planes
    Processing Negative Plane Data
    Processing Thieving Data
    Processing Resistor Shapes
    Processing Conductive Shapes
    Processing RF Conductive Shapes
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Traces
    Processing Component Pads
    Processing Positive Planes
    ActualPlaneShape
    ActualPlaneShape
    Processing Negative Plane Data
    Processing Thieving Data
    Processing Resistor Shapes
    Processing Conductive Shapes
    Processing RF Conductive Shapes
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Traces
    Processing Component Pads
    Processing Positive Planes
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    WARNING: Since the starting (1.3385828,2.4803149)(mm) and the ending (1.3385825,2.4803150)(mm) coordinates of the arc are to close, it will be interpreted as an arc of 360 degrees per ODB++ standards and can potentially cause problems. 
    Hence this arc is approximated to a line.
    ActualPlaneShape
    ActualPlaneShape
    ActualPlaneShape
    Processing Negative Plane Data
    Processing Thieving Data
    Processing Resistor Shapes
    Processing Conductive Shapes
    Processing RF Conductive Shapes
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Component Pads
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Component Pads
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Component Pads
    Processing Soldermask Data
    Processing Text
    Processing Via Pads
    Processing Fiducials
    Processing Component Pads
    Processing Soldermask Data
    Processing Text
    Processing Assembly Data
    Processing Text
    Processing Text
    Processing Through Drill Drawing Data
    Processing Text
    Processing Vias
    Processing Component Holes
    Processing Mounting Holes
    Processing Alternate Silkscreen Data
Creating package
Packaging completed
Process Completed at ....
03:23:04 PM Monday, February 25, 2013