ivanxblue/ivan-torvalds-GuitarPedal
0
Fork 0
forked from AllSpiceMirrors/torvalds-GuitarPedal
Files Design Reviews 1
Files
main
New Design Review ivan-torvalds-GuitarPedal/Hardware/symbols/DFN-6_1.6x1.3mm_P0.4mm.step
Linus Torvalds 1034d86052 Update the "USB Stomp" board to use design blocks 
This is pretty much a re-do of the "USB Stomp" board to include
everything into one single design and one single resulting board.

It makes little sense - it's not that interesting a board - but the
impetus was mostly just to learn and use new features, both on the
design side and on the manufacturing side.

So this does two very big things:

 - it uses the new TAC5242 / RP2354 design blocks as part of the
   schematic and the PCB layout.

 - the board is manufactured as one single flex board instead of having
   separate "audio jacks" and "USB stomp" boards

In other words, it's the same as the combination of the "audio jacks"
board and the previous "USB stomp" board, that used a FFC cable to
connect the two, except now the FFC cable is basically part of the
design, and the traditional rigid parts have been replaced by FR4
stiffeners instead.

In the process, this does various other minor changes:

 - No more separate BOOTSEL switch, which was a nightmare when the thing
   was boxed up. Instead, the stomp switch doubles up as the BOOTSEL
   switch too.

   Connecting the same switch to both a GPIO and BOOTSEL needs a bit of
   care: it would have been technically possible to only connect it to
   the the BOOTSEL pin, and read it that way with no GPIO at all, but
   the BOOTSEL line is also tied to the QSPI chip select pin, so then
   reading just the status requires turning off FLASH access.

   I considered doing exactly that, and it is entirely possible to do
   (micropython even has a "rp2.bootsel_button()" function for this),
   but when you use both cores, it's just very painful to make sure
   neither core is accessing the flash while you read the BOOTSEL
   status.

   So adding a little bit of hardware makes it much easier, and isolates
   the GPIO from the QSPI chip select using a dual diode. The switch
   pulls both low, but the wiggling of the QSPI CS line doesn't affect
   the GPIO.

   While at it, this also does some minimal HW debouncing, since now we
   might possibly be getting some high-frequency noise from the QSPI
   side.

 - Add a few LEDs and rotary encoders too as another portion connected
   with the flex strips

 - Add some missing 3D models

   The 3D model for the rotary encoder is just my old 9mm potentiometer
   model, it's not even remotely correct, but it approximates the
   overall shape.

   The 3D model for the WS2812B-2020 is me just half-arsing the official
   kicad model generator and generating something that approximates the
   real thing. It's very much a monkey-see-monkey-do thing that at least
   gives me something to look at.

   The RP2354 model is using the kicad model generator to add the QFN-60
   model that the official repo doesn't have.

Note for next time: jlcpcb seems potentially happier with protel
filenames, but the automated layer recognition needs some manual
renaming anyway.  So the bottom stiffener layer should then be manually
renamed to something like

     BottomStiffenerLayer.fr4b_0.8.gbsl

just to make it as obvious as humanly possible.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-07-20 10:06:36 -07:00

565 lines
21 KiB
Plaintext
Raw Permalink Blame History

ISO-10303-21;
HEADER;
/* DFN-6_1.6x1.3mm_P0.4mm.step 3D STEP model for use in ECAD systems
* Copyright (C) 2026, KiCAD
*
* This work is licensed under the
* [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),
* with the following exception:
*
* To the extent that the creation of electronic designs that use 'Licensed Material' can be
* considered to be 'Adapted Material', then the copyright holder waives article 3 of the license
* with respect to these designs and any generated files which use data provided as part of the
* 'Licensed Material'.
*
* You are free to use the library data in your own projects without the obligation to share your
* project files under this or any other license agreement. However, if you wish to distribute
* these libraries, or parts thereof (including in modified form) as a collection then the exception
* above does not apply. Please refer to
* https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification
* of the exception.
*
* Disclaimer of Warranties and Limitation of Liability.
* These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.
* USE 3D CAD DATA AT YOUR OWN RISK
* DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.
*/
FILE_DESCRIPTION(
/* description */ ('model of DFN-6_1.6x1.3mm_P0.4mm'),
/* implementation_level */ '2;1');
FILE_NAME(
/* name */ 'DFN-6_1.6x1.3mm_P0.4mm.step',
/* time_stamp */ '1970-01-01T00:00:00',
/* author */ ('KiCAD','kicad'),
/* organization */ ('OCCT'),
/* preprocessor_version */ '',
/* originating_system */ 'KiCAD',
/* authorisation */ '');
FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
ENDSEC;
DATA;
#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);
#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');
#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);
#4=PRODUCT_DEFINITION_SHAPE('','',#5);
#5=PRODUCT_DEFINITION('design','',#6,#9);
#6=PRODUCT_DEFINITION_FORMATION('','',#7);
#7=PRODUCT('DFN-6_1.6x1.3mm_P0.4mm','DFN-6_1.6x1.3mm_P0.4mm','',(#8));
#8=PRODUCT_CONTEXT('',#2,'mechanical');
#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#468);
#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);
#12=CARTESIAN_POINT('',(0.,0.,0.));
#13=DIRECTION('',(0.,0.,1.));
#14=DIRECTION('',(1.,0.,-0.));
#15=MANIFOLD_SOLID_BREP('',#16);
#16=CLOSED_SHELL('',(#17,#105,#133,#147,#283,#295,#306,#317,#327,#375,#381,#392,#402,#412,#425,#437,#449,#456,#462));
#17=ADVANCED_FACE('',(#18),#102,.F.);
#18=FACE_BOUND('',#19,.F.);
#19=EDGE_LOOP('',(#20,#29,#35,#40,#45,#52,#57,#61,#66,#71,#76,#80,#85,#90,#95,#99));
#20=ORIENTED_EDGE('',*,*,#21,.F.);
#21=EDGE_CURVE('',#22,#24,#26,.T.);
#22=VERTEX_POINT('',#23);
#23=CARTESIAN_POINT('',(-0.8,-0.65,0.6));
#24=VERTEX_POINT('',#25);
#25=CARTESIAN_POINT('',(-0.8,0.65,0.6));
#26=LINE('',#23,#27);
#27=VECTOR('',#28,1.);
#28=DIRECTION('',(0.,1.,0.));
#29=ORIENTED_EDGE('',*,*,#30,.F.);
#30=EDGE_CURVE('',#31,#22,#33,.T.);
#31=VERTEX_POINT('',#32);
#32=CARTESIAN_POINT('',(-0.8,-0.65,0.));
#33=LINE('',#32,#34);
#34=VECTOR('',#13,1.);
#35=ORIENTED_EDGE('',*,*,#36,.T.);
#36=EDGE_CURVE('',#31,#37,#39,.T.);
#37=VERTEX_POINT('',#38);
#38=CARTESIAN_POINT('',(-0.8,-0.5,0.));
#39=LINE('',#32,#27);
#40=ORIENTED_EDGE('',*,*,#41,.T.);
#41=EDGE_CURVE('',#37,#42,#44,.T.);
#42=VERTEX_POINT('',#43);
#43=CARTESIAN_POINT('',(-0.8,-0.5,0.11));
#44=LINE('',#38,#34);
#45=ORIENTED_EDGE('',*,*,#46,.F.);
#46=EDGE_CURVE('',#47,#42,#49,.T.);
#47=VERTEX_POINT('',#48);
#48=CARTESIAN_POINT('',(-0.8,-0.3,0.11));
#49=LINE('',#48,#50);
#50=VECTOR('',#51,1.);
#51=DIRECTION('',(-1.110223024625E-16,-1.,0.));
#52=ORIENTED_EDGE('',*,*,#53,.F.);
#53=EDGE_CURVE('',#54,#47,#56,.T.);
#54=VERTEX_POINT('',#55);
#55=CARTESIAN_POINT('',(-0.8,-0.3,0.));
#56=LINE('',#55,#34);
#57=ORIENTED_EDGE('',*,*,#58,.T.);
#58=EDGE_CURVE('',#54,#59,#39,.T.);
#59=VERTEX_POINT('',#60);
#60=CARTESIAN_POINT('',(-0.8,-1.E-01,0.));
#61=ORIENTED_EDGE('',*,*,#62,.T.);
#62=EDGE_CURVE('',#59,#63,#65,.T.);
#63=VERTEX_POINT('',#64);
#64=CARTESIAN_POINT('',(-0.8,-1.E-01,0.11));
#65=LINE('',#60,#34);
#66=ORIENTED_EDGE('',*,*,#67,.F.);
#67=EDGE_CURVE('',#68,#63,#70,.T.);
#68=VERTEX_POINT('',#69);
#69=CARTESIAN_POINT('',(-0.8,0.1,0.11));
#70=LINE('',#69,#50);
#71=ORIENTED_EDGE('',*,*,#72,.F.);
#72=EDGE_CURVE('',#73,#68,#75,.T.);
#73=VERTEX_POINT('',#74);
#74=CARTESIAN_POINT('',(-0.8,0.1,0.));
#75=LINE('',#74,#34);
#76=ORIENTED_EDGE('',*,*,#77,.T.);
#77=EDGE_CURVE('',#73,#78,#39,.T.);
#78=VERTEX_POINT('',#79);
#79=CARTESIAN_POINT('',(-0.8,0.3,0.));
#80=ORIENTED_EDGE('',*,*,#81,.T.);
#81=EDGE_CURVE('',#78,#82,#84,.T.);
#82=VERTEX_POINT('',#83);
#83=CARTESIAN_POINT('',(-0.8,0.3,0.11));
#84=LINE('',#79,#34);
#85=ORIENTED_EDGE('',*,*,#86,.F.);
#86=EDGE_CURVE('',#87,#82,#89,.T.);
#87=VERTEX_POINT('',#88);
#88=CARTESIAN_POINT('',(-0.8,0.5,0.11));
#89=LINE('',#88,#50);
#90=ORIENTED_EDGE('',*,*,#91,.F.);
#91=EDGE_CURVE('',#92,#87,#94,.T.);
#92=VERTEX_POINT('',#93);
#93=CARTESIAN_POINT('',(-0.8,0.5,0.));
#94=LINE('',#93,#34);
#95=ORIENTED_EDGE('',*,*,#96,.T.);
#96=EDGE_CURVE('',#92,#97,#39,.T.);
#97=VERTEX_POINT('',#98);
#98=CARTESIAN_POINT('',(-0.8,0.65,0.));
#99=ORIENTED_EDGE('',*,*,#100,.T.);
#100=EDGE_CURVE('',#97,#24,#101,.T.);
#101=LINE('',#98,#34);
#102=PLANE('',#103);
#103=AXIS2_PLACEMENT_3D('',#32,#104,#13);
#104=DIRECTION('',(1.,0.,0.));
#105=ADVANCED_FACE('',(#106,#122),#131,.T.);
#106=FACE_BOUND('',#107,.T.);
#107=EDGE_LOOP('',(#20,#108,#114,#119));
#108=ORIENTED_EDGE('',*,*,#109,.T.);
#109=EDGE_CURVE('',#22,#110,#112,.T.);
#110=VERTEX_POINT('',#111);
#111=CARTESIAN_POINT('',(0.8,-0.65,0.6));
#112=LINE('',#23,#113);
#113=VECTOR('',#104,1.);
#114=ORIENTED_EDGE('',*,*,#115,.T.);
#115=EDGE_CURVE('',#110,#116,#118,.T.);
#116=VERTEX_POINT('',#117);
#117=CARTESIAN_POINT('',(0.8,0.65,0.6));
#118=LINE('',#111,#27);
#119=ORIENTED_EDGE('',*,*,#120,.F.);
#120=EDGE_CURVE('',#24,#116,#121,.T.);
#121=LINE('',#25,#113);
#122=FACE_BOUND('',#123,.T.);
#123=EDGE_LOOP('',(#124));
#124=ORIENTED_EDGE('',*,*,#125,.F.);
#125=EDGE_CURVE('',#126,#126,#128,.T.);
#126=VERTEX_POINT('',#127);
#127=CARTESIAN_POINT('',(-0.56,0.49,0.6));
#128=CIRCLE('',#129,8.E-02);
#129=AXIS2_PLACEMENT_3D('',#130,#13,#104);
#130=CARTESIAN_POINT('',(-0.64,0.49,0.6));
#131=PLANE('',#132);
#132=AXIS2_PLACEMENT_3D('',#23,#13,#104);
#133=ADVANCED_FACE('',(#134),#145,.T.);
#134=FACE_BOUND('',#135,.T.);
#135=EDGE_LOOP('',(#136,#99,#141,#142));
#136=ORIENTED_EDGE('',*,*,#137,.F.);
#137=EDGE_CURVE('',#97,#138,#140,.T.);
#138=VERTEX_POINT('',#139);
#139=CARTESIAN_POINT('',(0.8,0.65,0.));
#140=LINE('',#98,#113);
#141=ORIENTED_EDGE('',*,*,#120,.T.);
#142=ORIENTED_EDGE('',*,*,#143,.F.);
#143=EDGE_CURVE('',#138,#116,#144,.T.);
#144=LINE('',#139,#34);
#145=PLANE('',#146);
#146=AXIS2_PLACEMENT_3D('',#98,#28,#13);
#147=ADVANCED_FACE('',(#148),#281,.F.);
#148=FACE_BOUND('',#149,.F.);
#149=EDGE_LOOP('',(#150,#151,#156,#161,#168,#177,#184,#188,#193,#200,#205,#209,#214,#221,#226,#136,#228,#229,#236,#244,#249,#250,#255,#262,#265,#266,#271,#278));
#150=ORIENTED_EDGE('',*,*,#36,.F.);
#151=ORIENTED_EDGE('',*,*,#152,.T.);
#152=EDGE_CURVE('',#31,#153,#155,.T.);
#153=VERTEX_POINT('',#154);
#154=CARTESIAN_POINT('',(0.8,-0.65,0.));
#155=LINE('',#32,#113);
#156=ORIENTED_EDGE('',*,*,#157,.T.);
#157=EDGE_CURVE('',#153,#158,#160,.T.);
#158=VERTEX_POINT('',#159);
#159=CARTESIAN_POINT('',(0.8,-0.5,0.));
#160=LINE('',#154,#27);
#161=ORIENTED_EDGE('',*,*,#162,.F.);
#162=EDGE_CURVE('',#163,#158,#165,.T.);
#163=VERTEX_POINT('',#164);
#164=CARTESIAN_POINT('',(0.347,-0.5,0.));
#165=LINE('',#164,#166);
#166=VECTOR('',#167,1.);
#167=DIRECTION('',(1.,-2.22044604925E-16,0.));
#168=ORIENTED_EDGE('',*,*,#169,.F.);
#169=EDGE_CURVE('',#170,#163,#172,.T.);
#170=VERTEX_POINT('',#171);
#171=CARTESIAN_POINT('',(0.347,-0.3,0.));
#172=CIRCLE('',#173,1.E-01);
#173=AXIS2_PLACEMENT_3D('',#174,#175,#176);
#174=CARTESIAN_POINT('',(0.347,-0.4,0.));
#175=DIRECTION('',(0.,-0.,1.));
#176=DIRECTION('',(4.996003610813E-16,1.,0.));
#177=ORIENTED_EDGE('',*,*,#178,.F.);
#178=EDGE_CURVE('',#179,#170,#181,.T.);
#179=VERTEX_POINT('',#180);
#180=CARTESIAN_POINT('',(0.8,-0.3,0.));
#181=LINE('',#180,#182);
#182=VECTOR('',#183,1.);
#183=DIRECTION('',(-1.,1.607740185771E-16,0.));
#184=ORIENTED_EDGE('',*,*,#185,.T.);
#185=EDGE_CURVE('',#179,#186,#160,.T.);
#186=VERTEX_POINT('',#187);
#187=CARTESIAN_POINT('',(0.8,-0.1,0.));
#188=ORIENTED_EDGE('',*,*,#189,.F.);
#189=EDGE_CURVE('',#190,#186,#192,.T.);
#190=VERTEX_POINT('',#191);
#191=CARTESIAN_POINT('',(0.347,-1.E-01,0.));
#192=LINE('',#191,#166);
#193=ORIENTED_EDGE('',*,*,#194,.F.);
#194=EDGE_CURVE('',#195,#190,#197,.T.);
#195=VERTEX_POINT('',#196);
#196=CARTESIAN_POINT('',(0.347,0.1,0.));
#197=CIRCLE('',#198,1.E-01);
#198=AXIS2_PLACEMENT_3D('',#199,#175,#176);
#199=CARTESIAN_POINT('',(0.347,3.225197886536E-17,0.));
#200=ORIENTED_EDGE('',*,*,#201,.F.);
#201=EDGE_CURVE('',#202,#195,#204,.T.);
#202=VERTEX_POINT('',#203);
#203=CARTESIAN_POINT('',(0.8,1.E-01,0.));
#204=LINE('',#203,#182);
#205=ORIENTED_EDGE('',*,*,#206,.T.);
#206=EDGE_CURVE('',#202,#207,#160,.T.);
#207=VERTEX_POINT('',#208);
#208=CARTESIAN_POINT('',(0.8,0.3,0.));
#209=ORIENTED_EDGE('',*,*,#210,.F.);
#210=EDGE_CURVE('',#211,#207,#213,.T.);
#211=VERTEX_POINT('',#212);
#212=CARTESIAN_POINT('',(0.347,0.3,0.));
#213=LINE('',#212,#166);
#214=ORIENTED_EDGE('',*,*,#215,.F.);
#215=EDGE_CURVE('',#216,#211,#218,.T.);
#216=VERTEX_POINT('',#217);
#217=CARTESIAN_POINT('',(0.347,0.5,0.));
#218=CIRCLE('',#219,1.E-01);
#219=AXIS2_PLACEMENT_3D('',#220,#175,#176);
#220=CARTESIAN_POINT('',(0.347,0.4,0.));
#221=ORIENTED_EDGE('',*,*,#222,.F.);
#222=EDGE_CURVE('',#223,#216,#225,.T.);
#223=VERTEX_POINT('',#224);
#224=CARTESIAN_POINT('',(0.8,0.5,0.));
#225=LINE('',#224,#182);
#226=ORIENTED_EDGE('',*,*,#227,.T.);
#227=EDGE_CURVE('',#223,#138,#160,.T.);
#228=ORIENTED_EDGE('',*,*,#96,.F.);
#229=ORIENTED_EDGE('',*,*,#230,.F.);
#230=EDGE_CURVE('',#231,#92,#233,.T.);
#231=VERTEX_POINT('',#232);
#232=CARTESIAN_POINT('',(-0.347,0.5,0.));
#233=LINE('',#232,#234);
#234=VECTOR('',#235,1.);
#235=DIRECTION('',(-1.,1.110223024625E-16,0.));
#236=ORIENTED_EDGE('',*,*,#237,.F.);
#237=EDGE_CURVE('',#238,#231,#240,.T.);
#238=VERTEX_POINT('',#239);
#239=CARTESIAN_POINT('',(-0.347,0.3,0.));
#240=CIRCLE('',#241,1.E-01);
#241=AXIS2_PLACEMENT_3D('',#242,#13,#243);
#242=CARTESIAN_POINT('',(-0.347,0.4,0.));
#243=DIRECTION('',(-3.885780586188E-16,-1.,0.));
#244=ORIENTED_EDGE('',*,*,#245,.F.);
#245=EDGE_CURVE('',#78,#238,#246,.T.);
#246=LINE('',#79,#247);
#247=VECTOR('',#248,1.);
#248=DIRECTION('',(1.,-4.975171611455E-17,0.));
#249=ORIENTED_EDGE('',*,*,#77,.F.);
#250=ORIENTED_EDGE('',*,*,#251,.F.);
#251=EDGE_CURVE('',#252,#73,#254,.T.);
#252=VERTEX_POINT('',#253);
#253=CARTESIAN_POINT('',(-0.347,1.E-01,0.));
#254=LINE('',#253,#234);
#255=ORIENTED_EDGE('',*,*,#256,.F.);
#256=EDGE_CURVE('',#257,#252,#259,.T.);
#257=VERTEX_POINT('',#258);
#258=CARTESIAN_POINT('',(-0.347,-1.E-01,0.));
#259=CIRCLE('',#260,1.E-01);
#260=AXIS2_PLACEMENT_3D('',#261,#13,#243);
#261=CARTESIAN_POINT('',(-0.347,-1.265654248073E-17,0.));
#262=ORIENTED_EDGE('',*,*,#263,.F.);
#263=EDGE_CURVE('',#59,#257,#264,.T.);
#264=LINE('',#60,#247);
#265=ORIENTED_EDGE('',*,*,#58,.F.);
#266=ORIENTED_EDGE('',*,*,#267,.F.);
#267=EDGE_CURVE('',#268,#54,#270,.T.);
#268=VERTEX_POINT('',#269);
#269=CARTESIAN_POINT('',(-0.347,-0.3,0.));
#270=LINE('',#269,#234);
#271=ORIENTED_EDGE('',*,*,#272,.F.);
#272=EDGE_CURVE('',#273,#268,#275,.T.);
#273=VERTEX_POINT('',#274);
#274=CARTESIAN_POINT('',(-0.347,-0.5,0.));
#275=CIRCLE('',#276,1.E-01);
#276=AXIS2_PLACEMENT_3D('',#277,#13,#243);
#277=CARTESIAN_POINT('',(-0.347,-0.4,0.));
#278=ORIENTED_EDGE('',*,*,#279,.F.);
#279=EDGE_CURVE('',#37,#273,#280,.T.);
#280=LINE('',#38,#247);
#281=PLANE('',#282);
#282=AXIS2_PLACEMENT_3D('',#32,#13,#104);
#283=ADVANCED_FACE('',(#284),#292,.F.);
#284=FACE_BOUND('',#285,.F.);
#285=EDGE_LOOP('',(#286,#287,#288,#289));
#286=ORIENTED_EDGE('',*,*,#91,.T.);
#287=ORIENTED_EDGE('',*,*,#86,.T.);
#288=ORIENTED_EDGE('',*,*,#81,.F.);
#289=ORIENTED_EDGE('',*,*,#290,.F.);
#290=EDGE_CURVE('',#92,#78,#291,.T.);
#291=LINE('',#93,#50);
#292=PLANE('',#293);
#293=AXIS2_PLACEMENT_3D('',#93,#294,#51);
#294=DIRECTION('',(1.,-1.110223024625E-16,0.));
#295=ADVANCED_FACE('',(#296),#304,.F.);
#296=FACE_BOUND('',#297,.F.);
#297=EDGE_LOOP('',(#298,#299,#300,#301));
#298=ORIENTED_EDGE('',*,*,#72,.T.);
#299=ORIENTED_EDGE('',*,*,#67,.T.);
#300=ORIENTED_EDGE('',*,*,#62,.F.);
#301=ORIENTED_EDGE('',*,*,#302,.F.);
#302=EDGE_CURVE('',#73,#59,#303,.T.);
#303=LINE('',#74,#50);
#304=PLANE('',#305);
#305=AXIS2_PLACEMENT_3D('',#74,#294,#51);
#306=ADVANCED_FACE('',(#307),#315,.F.);
#307=FACE_BOUND('',#308,.F.);
#308=EDGE_LOOP('',(#309,#310,#311,#312));
#309=ORIENTED_EDGE('',*,*,#53,.T.);
#310=ORIENTED_EDGE('',*,*,#46,.T.);
#311=ORIENTED_EDGE('',*,*,#41,.F.);
#312=ORIENTED_EDGE('',*,*,#313,.F.);
#313=EDGE_CURVE('',#54,#37,#314,.T.);
#314=LINE('',#55,#50);
#315=PLANE('',#316);
#316=AXIS2_PLACEMENT_3D('',#55,#294,#51);
#317=ADVANCED_FACE('',(#318),#325,.F.);
#318=FACE_BOUND('',#319,.F.);
#319=EDGE_LOOP('',(#320,#321,#108,#322));
#320=ORIENTED_EDGE('',*,*,#152,.F.);
#321=ORIENTED_EDGE('',*,*,#30,.T.);
#322=ORIENTED_EDGE('',*,*,#323,.F.);
#323=EDGE_CURVE('',#153,#110,#324,.T.);
#324=LINE('',#154,#34);
#325=PLANE('',#326);
#326=AXIS2_PLACEMENT_3D('',#32,#28,#13);
#327=ADVANCED_FACE('',(#328),#373,.T.);
#328=FACE_BOUND('',#329,.T.);
#329=EDGE_LOOP('',(#330,#322,#156,#331,#336,#343,#184,#346,#351,#356,#205,#359,#364,#369,#226,#372));
#330=ORIENTED_EDGE('',*,*,#115,.F.);
#331=ORIENTED_EDGE('',*,*,#332,.T.);
#332=EDGE_CURVE('',#158,#333,#335,.T.);
#333=VERTEX_POINT('',#334);
#334=CARTESIAN_POINT('',(0.8,-0.5,0.11));
#335=LINE('',#159,#34);
#336=ORIENTED_EDGE('',*,*,#337,.T.);
#337=EDGE_CURVE('',#333,#338,#340,.T.);
#338=VERTEX_POINT('',#339);
#339=CARTESIAN_POINT('',(0.8,-0.3,0.11));
#340=LINE('',#334,#341);
#341=VECTOR('',#342,1.);
#342=DIRECTION('',(2.22044604925E-16,1.,0.));
#343=ORIENTED_EDGE('',*,*,#344,.F.);
#344=EDGE_CURVE('',#179,#338,#345,.T.);
#345=LINE('',#180,#34);
#346=ORIENTED_EDGE('',*,*,#347,.T.);
#347=EDGE_CURVE('',#186,#348,#350,.T.);
#348=VERTEX_POINT('',#349);
#349=CARTESIAN_POINT('',(0.8,-0.1,0.11));
#350=LINE('',#187,#34);
#351=ORIENTED_EDGE('',*,*,#352,.T.);
#352=EDGE_CURVE('',#348,#353,#355,.T.);
#353=VERTEX_POINT('',#354);
#354=CARTESIAN_POINT('',(0.8,1.E-01,0.11));
#355=LINE('',#349,#341);
#356=ORIENTED_EDGE('',*,*,#357,.F.);
#357=EDGE_CURVE('',#202,#353,#358,.T.);
#358=LINE('',#203,#34);
#359=ORIENTED_EDGE('',*,*,#360,.T.);
#360=EDGE_CURVE('',#207,#361,#363,.T.);
#361=VERTEX_POINT('',#362);
#362=CARTESIAN_POINT('',(0.8,0.3,0.11));
#363=LINE('',#208,#34);
#364=ORIENTED_EDGE('',*,*,#365,.T.);
#365=EDGE_CURVE('',#361,#366,#368,.T.);
#366=VERTEX_POINT('',#367);
#367=CARTESIAN_POINT('',(0.8,0.5,0.11));
#368=LINE('',#362,#341);
#369=ORIENTED_EDGE('',*,*,#370,.F.);
#370=EDGE_CURVE('',#223,#366,#371,.T.);
#371=LINE('',#224,#34);
#372=ORIENTED_EDGE('',*,*,#143,.T.);
#373=PLANE('',#374);
#374=AXIS2_PLACEMENT_3D('',#154,#104,#13);
#375=ADVANCED_FACE('',(#376),#379,.T.);
#376=FACE_BOUND('',#377,.T.);
#377=EDGE_LOOP('',(#378));
#378=ORIENTED_EDGE('',*,*,#125,.T.);
#379=PLANE('',#380);
#380=AXIS2_PLACEMENT_3D('',#130,#13,#14);
#381=ADVANCED_FACE('',(#382),#388,.F.);
#382=FACE_BOUND('',#383,.F.);
#383=EDGE_LOOP('',(#384,#385,#386,#387));
#384=ORIENTED_EDGE('',*,*,#272,.T.);
#385=ORIENTED_EDGE('',*,*,#267,.T.);
#386=ORIENTED_EDGE('',*,*,#313,.T.);
#387=ORIENTED_EDGE('',*,*,#279,.T.);
#388=PLANE('',#389);
#389=AXIS2_PLACEMENT_3D('',#390,#13,#391);
#390=CARTESIAN_POINT('',(-0.54507147363,-0.4,0.));
#391=DIRECTION('',(1.110223024625E-16,1.,0.));
#392=ADVANCED_FACE('',(#393),#399,.F.);
#393=FACE_BOUND('',#394,.F.);
#394=EDGE_LOOP('',(#395,#396,#397,#398));
#395=ORIENTED_EDGE('',*,*,#256,.T.);
#396=ORIENTED_EDGE('',*,*,#251,.T.);
#397=ORIENTED_EDGE('',*,*,#302,.T.);
#398=ORIENTED_EDGE('',*,*,#263,.T.);
#399=PLANE('',#400);
#400=AXIS2_PLACEMENT_3D('',#401,#13,#391);
#401=CARTESIAN_POINT('',(-0.54507147363,4.862515631514E-18,0.));
#402=ADVANCED_FACE('',(#403),#409,.F.);
#403=FACE_BOUND('',#404,.F.);
#404=EDGE_LOOP('',(#405,#406,#407,#408));
#405=ORIENTED_EDGE('',*,*,#237,.T.);
#406=ORIENTED_EDGE('',*,*,#230,.T.);
#407=ORIENTED_EDGE('',*,*,#290,.T.);
#408=ORIENTED_EDGE('',*,*,#245,.T.);
#409=PLANE('',#410);
#410=AXIS2_PLACEMENT_3D('',#411,#13,#391);
#411=CARTESIAN_POINT('',(-0.54507147363,0.4,0.));
#412=ADVANCED_FACE('',(#413),#421,.F.);
#413=FACE_BOUND('',#414,.F.);
#414=EDGE_LOOP('',(#415,#416,#417,#420));
#415=ORIENTED_EDGE('',*,*,#215,.T.);
#416=ORIENTED_EDGE('',*,*,#210,.T.);
#417=ORIENTED_EDGE('',*,*,#418,.T.);
#418=EDGE_CURVE('',#207,#223,#419,.T.);
#419=LINE('',#208,#341);
#420=ORIENTED_EDGE('',*,*,#222,.T.);
#421=PLANE('',#422);
#422=AXIS2_PLACEMENT_3D('',#423,#13,#424);
#423=CARTESIAN_POINT('',(0.54507147363,0.4,0.));
#424=DIRECTION('',(-2.22044604925E-16,-1.,0.));
#425=ADVANCED_FACE('',(#426),#434,.F.);
#426=FACE_BOUND('',#427,.F.);
#427=EDGE_LOOP('',(#428,#429,#430,#433));
#428=ORIENTED_EDGE('',*,*,#194,.T.);
#429=ORIENTED_EDGE('',*,*,#189,.T.);
#430=ORIENTED_EDGE('',*,*,#431,.T.);
#431=EDGE_CURVE('',#186,#202,#432,.T.);
#432=LINE('',#187,#341);
#433=ORIENTED_EDGE('',*,*,#201,.T.);
#434=PLANE('',#435);
#435=AXIS2_PLACEMENT_3D('',#436,#13,#424);
#436=CARTESIAN_POINT('',(0.54507147363,-7.257430301468E-18,0.));
#437=ADVANCED_FACE('',(#438),#446,.F.);
#438=FACE_BOUND('',#439,.F.);
#439=EDGE_LOOP('',(#440,#441,#442,#445));
#440=ORIENTED_EDGE('',*,*,#169,.T.);
#441=ORIENTED_EDGE('',*,*,#162,.T.);
#442=ORIENTED_EDGE('',*,*,#443,.T.);
#443=EDGE_CURVE('',#158,#179,#444,.T.);
#444=LINE('',#159,#341);
#445=ORIENTED_EDGE('',*,*,#178,.T.);
#446=PLANE('',#447);
#447=AXIS2_PLACEMENT_3D('',#448,#13,#424);
#448=CARTESIAN_POINT('',(0.54507147363,-0.4,0.));
#449=ADVANCED_FACE('',(#450),#453,.F.);
#450=FACE_BOUND('',#451,.F.);
#451=EDGE_LOOP('',(#359,#364,#369,#452));
#452=ORIENTED_EDGE('',*,*,#418,.F.);
#453=PLANE('',#454);
#454=AXIS2_PLACEMENT_3D('',#208,#455,#342);
#455=DIRECTION('',(-1.,2.22044604925E-16,0.));
#456=ADVANCED_FACE('',(#457),#460,.F.);
#457=FACE_BOUND('',#458,.F.);
#458=EDGE_LOOP('',(#346,#351,#356,#459));
#459=ORIENTED_EDGE('',*,*,#431,.F.);
#460=PLANE('',#461);
#461=AXIS2_PLACEMENT_3D('',#187,#455,#342);
#462=ADVANCED_FACE('',(#463),#466,.F.);
#463=FACE_BOUND('',#464,.F.);
#464=EDGE_LOOP('',(#331,#336,#343,#465));
#465=ORIENTED_EDGE('',*,*,#443,.F.);
#466=PLANE('',#467);
#467=AXIS2_PLACEMENT_3D('',#159,#455,#342);
#468=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#472)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#469,#470,#471)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );
#469=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
#470=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#471=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#472=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#469,'distance_accuracy_value','confusion accuracy');
#473=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));
#474=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#475,#485,#486,#487,#488,#497,#498,#499,#500,#501,#510,#511,#512,#513,#514,#515,#516,#517,#518),#468);
#475=STYLED_ITEM('color',(#476),#17);
#476=PRESENTATION_STYLE_ASSIGNMENT((#477,#483));
#477=SURFACE_STYLE_USAGE(.BOTH.,#478);
#478=SURFACE_SIDE_STYLE('',(#479));
#479=SURFACE_STYLE_FILL_AREA(#480);
#480=FILL_AREA_STYLE('',(#481));
#481=FILL_AREA_STYLE_COLOUR('',#482);
#482=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);
#483=CURVE_STYLE('',#484,POSITIVE_LENGTH_MEASURE(0.1),#482);
#484=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
#485=STYLED_ITEM('color',(#476),#105);
#486=STYLED_ITEM('color',(#476),#133);
#487=STYLED_ITEM('color',(#476),#147);
#488=STYLED_ITEM('color',(#489),#283);
#489=PRESENTATION_STYLE_ASSIGNMENT((#490,#496));
#490=SURFACE_STYLE_USAGE(.BOTH.,#491);
#491=SURFACE_SIDE_STYLE('',(#492));
#492=SURFACE_STYLE_FILL_AREA(#493);
#493=FILL_AREA_STYLE('',(#494));
#494=FILL_AREA_STYLE_COLOUR('',#495);
#495=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);
#496=CURVE_STYLE('',#484,POSITIVE_LENGTH_MEASURE(0.1),#495);
#497=STYLED_ITEM('color',(#489),#295);
#498=STYLED_ITEM('color',(#489),#306);
#499=STYLED_ITEM('color',(#476),#317);
#500=STYLED_ITEM('color',(#476),#327);
#501=STYLED_ITEM('color',(#502),#375);
#502=PRESENTATION_STYLE_ASSIGNMENT((#503,#509));
#503=SURFACE_STYLE_USAGE(.BOTH.,#504);
#504=SURFACE_SIDE_STYLE('',(#505));
#505=SURFACE_STYLE_FILL_AREA(#506);
#506=FILL_AREA_STYLE('',(#507));
#507=FILL_AREA_STYLE_COLOUR('',#508);
#508=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);
#509=CURVE_STYLE('',#484,POSITIVE_LENGTH_MEASURE(0.1),#508);
#510=STYLED_ITEM('color',(#489),#381);
#511=STYLED_ITEM('color',(#489),#392);
#512=STYLED_ITEM('color',(#489),#402);
#513=STYLED_ITEM('color',(#489),#412);
#514=STYLED_ITEM('color',(#489),#425);
#515=STYLED_ITEM('color',(#489),#437);
#516=STYLED_ITEM('color',(#489),#449);
#517=STYLED_ITEM('color',(#489),#456);
#518=STYLED_ITEM('color',(#489),#462);
ENDSEC;
END-ISO-10303-21;
View Git Blame Copy Permalink