ivanxblue/ivan-torvalds-GuitarPedal
0
Fork 0
forked from AllSpiceMirrors/torvalds-GuitarPedal
Files Design Reviews 1
Files
main
New Design Review ivan-torvalds-GuitarPedal/Hardware/symbols/QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm.step
Linus Torvalds 1034d86052 Update the "USB Stomp" board to use design blocks 
This is pretty much a re-do of the "USB Stomp" board to include
everything into one single design and one single resulting board.

It makes little sense - it's not that interesting a board - but the
impetus was mostly just to learn and use new features, both on the
design side and on the manufacturing side.

So this does two very big things:

 - it uses the new TAC5242 / RP2354 design blocks as part of the
   schematic and the PCB layout.

 - the board is manufactured as one single flex board instead of having
   separate "audio jacks" and "USB stomp" boards

In other words, it's the same as the combination of the "audio jacks"
board and the previous "USB stomp" board, that used a FFC cable to
connect the two, except now the FFC cable is basically part of the
design, and the traditional rigid parts have been replaced by FR4
stiffeners instead.

In the process, this does various other minor changes:

 - No more separate BOOTSEL switch, which was a nightmare when the thing
   was boxed up. Instead, the stomp switch doubles up as the BOOTSEL
   switch too.

   Connecting the same switch to both a GPIO and BOOTSEL needs a bit of
   care: it would have been technically possible to only connect it to
   the the BOOTSEL pin, and read it that way with no GPIO at all, but
   the BOOTSEL line is also tied to the QSPI chip select pin, so then
   reading just the status requires turning off FLASH access.

   I considered doing exactly that, and it is entirely possible to do
   (micropython even has a "rp2.bootsel_button()" function for this),
   but when you use both cores, it's just very painful to make sure
   neither core is accessing the flash while you read the BOOTSEL
   status.

   So adding a little bit of hardware makes it much easier, and isolates
   the GPIO from the QSPI chip select using a dual diode. The switch
   pulls both low, but the wiggling of the QSPI CS line doesn't affect
   the GPIO.

   While at it, this also does some minimal HW debouncing, since now we
   might possibly be getting some high-frequency noise from the QSPI
   side.

 - Add a few LEDs and rotary encoders too as another portion connected
   with the flex strips

 - Add some missing 3D models

   The 3D model for the rotary encoder is just my old 9mm potentiometer
   model, it's not even remotely correct, but it approximates the
   overall shape.

   The 3D model for the WS2812B-2020 is me just half-arsing the official
   kicad model generator and generating something that approximates the
   real thing. It's very much a monkey-see-monkey-do thing that at least
   gives me something to look at.

   The RP2354 model is using the kicad model generator to add the QFN-60
   model that the official repo doesn't have.

Note for next time: jlcpcb seems potentially happier with protel
filenames, but the automated layer recognition needs some manual
renaming anyway.  So the bottom stiffener layer should then be manually
renamed to something like

     BottomStiffenerLayer.fr4b_0.8.gbsl

just to make it as obvious as humanly possible.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2026-07-20 10:06:36 -07:00

3641 lines
138 KiB
Plaintext
Raw Permalink Blame History

ISO-10303-21;
HEADER;
/* QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm.step 3D STEP model for use in ECAD systems
* Copyright (C) 2026, KiCAD
*
* This work is licensed under the
* [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),
* with the following exception:
*
* To the extent that the creation of electronic designs that use 'Licensed Material' can be
* considered to be 'Adapted Material', then the copyright holder waives article 3 of the license
* with respect to these designs and any generated files which use data provided as part of the
* 'Licensed Material'.
*
* You are free to use the library data in your own projects without the obligation to share your
* project files under this or any other license agreement. However, if you wish to distribute
* these libraries, or parts thereof (including in modified form) as a collection then the exception
* above does not apply. Please refer to
* https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification
* of the exception.
*
* Disclaimer of Warranties and Limitation of Liability.
* These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.
* USE 3D CAD DATA AT YOUR OWN RISK
* DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.
*/
FILE_DESCRIPTION(
/* description */ ('model of QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm'),
/* implementation_level */ '2;1');
FILE_NAME(
/* name */ 'QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm.step',
/* time_stamp */ '1970-01-01T00:00:00',
/* author */ ('KiCAD','kicad'),
/* organization */ ('OCCT'),
/* preprocessor_version */ '',
/* originating_system */ 'KiCAD',
/* authorisation */ '');
FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
ENDSEC;
DATA;
#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);
#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');
#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);
#4=PRODUCT_DEFINITION_SHAPE('','',#5);
#5=PRODUCT_DEFINITION('design','',#6,#9);
#6=PRODUCT_DEFINITION_FORMATION('','',#7);
#7=PRODUCT('QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm','QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm','',(#8));
#8=PRODUCT_CONTEXT('',#2,'mechanical');
#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#3435);
#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);
#12=CARTESIAN_POINT('',(0.,0.,0.));
#13=DIRECTION('',(0.,0.,1.));
#14=DIRECTION('',(1.,0.,-0.));
#15=MANIFOLD_SOLID_BREP('',#16);
#16=CLOSED_SHELL('',(#17,#333,#361,#662,#1817,#1829,#1840,#1851,#1862,#1873,#1884,#1895,#1906,#1917,#1928,#1939,#1950,#1961,#1972,#1983,#2205,#2409,#2415,#2423,#2431,#2439,#2447,#2455,#2463,#2471,#2479,#2487,#2495,#2503,#2511,#2519,#2527,#2535,#2546,#2559,#2569,#2581,#2591,#2603,#2613,#2625,#2635,#2647,#2657,#2669,#2679,#2691,#2701,#2713,#2723,#2735,#2745,#2757,#2767,#2779,#2789,#2801,#2811,#2823,#2833,#2845,#2855,#2867,#2877,#2890,#2900,#2912,#2922,#2934,#2944,#2956,#2966,#2978,#2988,#3000,#3010,#3022,#3032,#3044,#3054,#3066,#3076,#3088,#3098,#3110,#3120,#3132,#3142,#3154,#3164,#3176,#3186,#3198,#3208,#3218,#3227,#3236,#3245,#3254,#3263,#3272,#3281,#3290,#3299,#3308,#3317,#3326,#3335,#3344,#3351,#3357,#3363,#3369,#3375,#3381,#3387,#3393,#3399,#3405,#3411,#3417,#3423,#3429));
#17=ADVANCED_FACE('',(#18),#330,.F.);
#18=FACE_BOUND('',#19,.F.);
#19=EDGE_LOOP('',(#20,#29,#35,#40,#45,#52,#57,#61,#66,#71,#76,#80,#85,#90,#95,#99,#104,#109,#114,#118,#123,#128,#133,#137,#142,#147,#152,#156,#161,#166,#171,#175,#180,#185,#190,#194,#199,#204,#209,#213,#218,#223,#228,#232,#237,#242,#247,#251,#256,#261,#266,#270,#275,#280,#285,#289,#294,#299,#304,#308,#313,#318,#323,#327));
#20=ORIENTED_EDGE('',*,*,#21,.F.);
#21=EDGE_CURVE('',#22,#24,#26,.T.);
#22=VERTEX_POINT('',#23);
#23=CARTESIAN_POINT('',(-3.5,-3.5,0.9));
#24=VERTEX_POINT('',#25);
#25=CARTESIAN_POINT('',(-3.5,3.5,0.9));
#26=LINE('',#23,#27);
#27=VECTOR('',#28,1.);
#28=DIRECTION('',(0.,1.,0.));
#29=ORIENTED_EDGE('',*,*,#30,.F.);
#30=EDGE_CURVE('',#31,#22,#33,.T.);
#31=VERTEX_POINT('',#32);
#32=CARTESIAN_POINT('',(-3.5,-3.5,0.));
#33=LINE('',#32,#34);
#34=VECTOR('',#13,1.);
#35=ORIENTED_EDGE('',*,*,#36,.T.);
#36=EDGE_CURVE('',#31,#37,#39,.T.);
#37=VERTEX_POINT('',#38);
#38=CARTESIAN_POINT('',(-3.5,-2.89,0.));
#39=LINE('',#32,#27);
#40=ORIENTED_EDGE('',*,*,#41,.T.);
#41=EDGE_CURVE('',#37,#42,#44,.T.);
#42=VERTEX_POINT('',#43);
#43=CARTESIAN_POINT('',(-3.5,-2.89,0.17));
#44=LINE('',#38,#34);
#45=ORIENTED_EDGE('',*,*,#46,.F.);
#46=EDGE_CURVE('',#47,#42,#49,.T.);
#47=VERTEX_POINT('',#48);
#48=CARTESIAN_POINT('',(-3.5,-2.71,0.17));
#49=LINE('',#48,#50);
#50=VECTOR('',#51,1.);
#51=DIRECTION('',(-1.110223024625E-16,-1.,0.));
#52=ORIENTED_EDGE('',*,*,#53,.F.);
#53=EDGE_CURVE('',#54,#47,#56,.T.);
#54=VERTEX_POINT('',#55);
#55=CARTESIAN_POINT('',(-3.5,-2.71,0.));
#56=LINE('',#55,#34);
#57=ORIENTED_EDGE('',*,*,#58,.T.);
#58=EDGE_CURVE('',#54,#59,#39,.T.);
#59=VERTEX_POINT('',#60);
#60=CARTESIAN_POINT('',(-3.5,-2.49,0.));
#61=ORIENTED_EDGE('',*,*,#62,.T.);
#62=EDGE_CURVE('',#59,#63,#65,.T.);
#63=VERTEX_POINT('',#64);
#64=CARTESIAN_POINT('',(-3.5,-2.49,0.17));
#65=LINE('',#60,#34);
#66=ORIENTED_EDGE('',*,*,#67,.F.);
#67=EDGE_CURVE('',#68,#63,#70,.T.);
#68=VERTEX_POINT('',#69);
#69=CARTESIAN_POINT('',(-3.5,-2.31,0.17));
#70=LINE('',#69,#50);
#71=ORIENTED_EDGE('',*,*,#72,.F.);
#72=EDGE_CURVE('',#73,#68,#75,.T.);
#73=VERTEX_POINT('',#74);
#74=CARTESIAN_POINT('',(-3.5,-2.31,0.));
#75=LINE('',#74,#34);
#76=ORIENTED_EDGE('',*,*,#77,.T.);
#77=EDGE_CURVE('',#73,#78,#39,.T.);
#78=VERTEX_POINT('',#79);
#79=CARTESIAN_POINT('',(-3.5,-2.09,0.));
#80=ORIENTED_EDGE('',*,*,#81,.T.);
#81=EDGE_CURVE('',#78,#82,#84,.T.);
#82=VERTEX_POINT('',#83);
#83=CARTESIAN_POINT('',(-3.5,-2.09,0.17));
#84=LINE('',#79,#34);
#85=ORIENTED_EDGE('',*,*,#86,.F.);
#86=EDGE_CURVE('',#87,#82,#89,.T.);
#87=VERTEX_POINT('',#88);
#88=CARTESIAN_POINT('',(-3.5,-1.91,0.17));
#89=LINE('',#88,#50);
#90=ORIENTED_EDGE('',*,*,#91,.F.);
#91=EDGE_CURVE('',#92,#87,#94,.T.);
#92=VERTEX_POINT('',#93);
#93=CARTESIAN_POINT('',(-3.5,-1.91,0.));
#94=LINE('',#93,#34);
#95=ORIENTED_EDGE('',*,*,#96,.T.);
#96=EDGE_CURVE('',#92,#97,#39,.T.);
#97=VERTEX_POINT('',#98);
#98=CARTESIAN_POINT('',(-3.5,-1.69,0.));
#99=ORIENTED_EDGE('',*,*,#100,.T.);
#100=EDGE_CURVE('',#97,#101,#103,.T.);
#101=VERTEX_POINT('',#102);
#102=CARTESIAN_POINT('',(-3.5,-1.69,0.17));
#103=LINE('',#98,#34);
#104=ORIENTED_EDGE('',*,*,#105,.F.);
#105=EDGE_CURVE('',#106,#101,#108,.T.);
#106=VERTEX_POINT('',#107);
#107=CARTESIAN_POINT('',(-3.5,-1.51,0.17));
#108=LINE('',#107,#50);
#109=ORIENTED_EDGE('',*,*,#110,.F.);
#110=EDGE_CURVE('',#111,#106,#113,.T.);
#111=VERTEX_POINT('',#112);
#112=CARTESIAN_POINT('',(-3.5,-1.51,0.));
#113=LINE('',#112,#34);
#114=ORIENTED_EDGE('',*,*,#115,.T.);
#115=EDGE_CURVE('',#111,#116,#39,.T.);
#116=VERTEX_POINT('',#117);
#117=CARTESIAN_POINT('',(-3.5,-1.29,0.));
#118=ORIENTED_EDGE('',*,*,#119,.T.);
#119=EDGE_CURVE('',#116,#120,#122,.T.);
#120=VERTEX_POINT('',#121);
#121=CARTESIAN_POINT('',(-3.5,-1.29,0.17));
#122=LINE('',#117,#34);
#123=ORIENTED_EDGE('',*,*,#124,.F.);
#124=EDGE_CURVE('',#125,#120,#127,.T.);
#125=VERTEX_POINT('',#126);
#126=CARTESIAN_POINT('',(-3.5,-1.11,0.17));
#127=LINE('',#126,#50);
#128=ORIENTED_EDGE('',*,*,#129,.F.);
#129=EDGE_CURVE('',#130,#125,#132,.T.);
#130=VERTEX_POINT('',#131);
#131=CARTESIAN_POINT('',(-3.5,-1.11,0.));
#132=LINE('',#131,#34);
#133=ORIENTED_EDGE('',*,*,#134,.T.);
#134=EDGE_CURVE('',#130,#135,#39,.T.);
#135=VERTEX_POINT('',#136);
#136=CARTESIAN_POINT('',(-3.5,-0.89,0.));
#137=ORIENTED_EDGE('',*,*,#138,.T.);
#138=EDGE_CURVE('',#135,#139,#141,.T.);
#139=VERTEX_POINT('',#140);
#140=CARTESIAN_POINT('',(-3.5,-0.89,0.17));
#141=LINE('',#136,#34);
#142=ORIENTED_EDGE('',*,*,#143,.F.);
#143=EDGE_CURVE('',#144,#139,#146,.T.);
#144=VERTEX_POINT('',#145);
#145=CARTESIAN_POINT('',(-3.5,-0.71,0.17));
#146=LINE('',#145,#50);
#147=ORIENTED_EDGE('',*,*,#148,.F.);
#148=EDGE_CURVE('',#149,#144,#151,.T.);
#149=VERTEX_POINT('',#150);
#150=CARTESIAN_POINT('',(-3.5,-0.71,0.));
#151=LINE('',#150,#34);
#152=ORIENTED_EDGE('',*,*,#153,.T.);
#153=EDGE_CURVE('',#149,#154,#39,.T.);
#154=VERTEX_POINT('',#155);
#155=CARTESIAN_POINT('',(-3.5,-0.49,0.));
#156=ORIENTED_EDGE('',*,*,#157,.T.);
#157=EDGE_CURVE('',#154,#158,#160,.T.);
#158=VERTEX_POINT('',#159);
#159=CARTESIAN_POINT('',(-3.5,-0.49,0.17));
#160=LINE('',#155,#34);
#161=ORIENTED_EDGE('',*,*,#162,.F.);
#162=EDGE_CURVE('',#163,#158,#165,.T.);
#163=VERTEX_POINT('',#164);
#164=CARTESIAN_POINT('',(-3.5,-0.31,0.17));
#165=LINE('',#164,#50);
#166=ORIENTED_EDGE('',*,*,#167,.F.);
#167=EDGE_CURVE('',#168,#163,#170,.T.);
#168=VERTEX_POINT('',#169);
#169=CARTESIAN_POINT('',(-3.5,-0.31,0.));
#170=LINE('',#169,#34);
#171=ORIENTED_EDGE('',*,*,#172,.T.);
#172=EDGE_CURVE('',#168,#173,#39,.T.);
#173=VERTEX_POINT('',#174);
#174=CARTESIAN_POINT('',(-3.5,-9.E-02,0.));
#175=ORIENTED_EDGE('',*,*,#176,.T.);
#176=EDGE_CURVE('',#173,#177,#179,.T.);
#177=VERTEX_POINT('',#178);
#178=CARTESIAN_POINT('',(-3.5,-9.E-02,0.17));
#179=LINE('',#174,#34);
#180=ORIENTED_EDGE('',*,*,#181,.F.);
#181=EDGE_CURVE('',#182,#177,#184,.T.);
#182=VERTEX_POINT('',#183);
#183=CARTESIAN_POINT('',(-3.5,9.E-02,0.17));
#184=LINE('',#183,#50);
#185=ORIENTED_EDGE('',*,*,#186,.F.);
#186=EDGE_CURVE('',#187,#182,#189,.T.);
#187=VERTEX_POINT('',#188);
#188=CARTESIAN_POINT('',(-3.5,9.E-02,0.));
#189=LINE('',#188,#34);
#190=ORIENTED_EDGE('',*,*,#191,.T.);
#191=EDGE_CURVE('',#187,#192,#39,.T.);
#192=VERTEX_POINT('',#193);
#193=CARTESIAN_POINT('',(-3.5,0.31,0.));
#194=ORIENTED_EDGE('',*,*,#195,.T.);
#195=EDGE_CURVE('',#192,#196,#198,.T.);
#196=VERTEX_POINT('',#197);
#197=CARTESIAN_POINT('',(-3.5,0.31,0.17));
#198=LINE('',#193,#34);
#199=ORIENTED_EDGE('',*,*,#200,.F.);
#200=EDGE_CURVE('',#201,#196,#203,.T.);
#201=VERTEX_POINT('',#202);
#202=CARTESIAN_POINT('',(-3.5,0.49,0.17));
#203=LINE('',#202,#50);
#204=ORIENTED_EDGE('',*,*,#205,.F.);
#205=EDGE_CURVE('',#206,#201,#208,.T.);
#206=VERTEX_POINT('',#207);
#207=CARTESIAN_POINT('',(-3.5,0.49,0.));
#208=LINE('',#207,#34);
#209=ORIENTED_EDGE('',*,*,#210,.T.);
#210=EDGE_CURVE('',#206,#211,#39,.T.);
#211=VERTEX_POINT('',#212);
#212=CARTESIAN_POINT('',(-3.5,0.71,0.));
#213=ORIENTED_EDGE('',*,*,#214,.T.);
#214=EDGE_CURVE('',#211,#215,#217,.T.);
#215=VERTEX_POINT('',#216);
#216=CARTESIAN_POINT('',(-3.5,0.71,0.17));
#217=LINE('',#212,#34);
#218=ORIENTED_EDGE('',*,*,#219,.F.);
#219=EDGE_CURVE('',#220,#215,#222,.T.);
#220=VERTEX_POINT('',#221);
#221=CARTESIAN_POINT('',(-3.5,0.89,0.17));
#222=LINE('',#221,#50);
#223=ORIENTED_EDGE('',*,*,#224,.F.);
#224=EDGE_CURVE('',#225,#220,#227,.T.);
#225=VERTEX_POINT('',#226);
#226=CARTESIAN_POINT('',(-3.5,0.89,0.));
#227=LINE('',#226,#34);
#228=ORIENTED_EDGE('',*,*,#229,.T.);
#229=EDGE_CURVE('',#225,#230,#39,.T.);
#230=VERTEX_POINT('',#231);
#231=CARTESIAN_POINT('',(-3.5,1.11,0.));
#232=ORIENTED_EDGE('',*,*,#233,.T.);
#233=EDGE_CURVE('',#230,#234,#236,.T.);
#234=VERTEX_POINT('',#235);
#235=CARTESIAN_POINT('',(-3.5,1.11,0.17));
#236=LINE('',#231,#34);
#237=ORIENTED_EDGE('',*,*,#238,.F.);
#238=EDGE_CURVE('',#239,#234,#241,.T.);
#239=VERTEX_POINT('',#240);
#240=CARTESIAN_POINT('',(-3.5,1.29,0.17));
#241=LINE('',#240,#50);
#242=ORIENTED_EDGE('',*,*,#243,.F.);
#243=EDGE_CURVE('',#244,#239,#246,.T.);
#244=VERTEX_POINT('',#245);
#245=CARTESIAN_POINT('',(-3.5,1.29,0.));
#246=LINE('',#245,#34);
#247=ORIENTED_EDGE('',*,*,#248,.T.);
#248=EDGE_CURVE('',#244,#249,#39,.T.);
#249=VERTEX_POINT('',#250);
#250=CARTESIAN_POINT('',(-3.5,1.51,0.));
#251=ORIENTED_EDGE('',*,*,#252,.T.);
#252=EDGE_CURVE('',#249,#253,#255,.T.);
#253=VERTEX_POINT('',#254);
#254=CARTESIAN_POINT('',(-3.5,1.51,0.17));
#255=LINE('',#250,#34);
#256=ORIENTED_EDGE('',*,*,#257,.F.);
#257=EDGE_CURVE('',#258,#253,#260,.T.);
#258=VERTEX_POINT('',#259);
#259=CARTESIAN_POINT('',(-3.5,1.69,0.17));
#260=LINE('',#259,#50);
#261=ORIENTED_EDGE('',*,*,#262,.F.);
#262=EDGE_CURVE('',#263,#258,#265,.T.);
#263=VERTEX_POINT('',#264);
#264=CARTESIAN_POINT('',(-3.5,1.69,0.));
#265=LINE('',#264,#34);
#266=ORIENTED_EDGE('',*,*,#267,.T.);
#267=EDGE_CURVE('',#263,#268,#39,.T.);
#268=VERTEX_POINT('',#269);
#269=CARTESIAN_POINT('',(-3.5,1.91,0.));
#270=ORIENTED_EDGE('',*,*,#271,.T.);
#271=EDGE_CURVE('',#268,#272,#274,.T.);
#272=VERTEX_POINT('',#273);
#273=CARTESIAN_POINT('',(-3.5,1.91,0.17));
#274=LINE('',#269,#34);
#275=ORIENTED_EDGE('',*,*,#276,.F.);
#276=EDGE_CURVE('',#277,#272,#279,.T.);
#277=VERTEX_POINT('',#278);
#278=CARTESIAN_POINT('',(-3.5,2.09,0.17));
#279=LINE('',#278,#50);
#280=ORIENTED_EDGE('',*,*,#281,.F.);
#281=EDGE_CURVE('',#282,#277,#284,.T.);
#282=VERTEX_POINT('',#283);
#283=CARTESIAN_POINT('',(-3.5,2.09,0.));
#284=LINE('',#283,#34);
#285=ORIENTED_EDGE('',*,*,#286,.T.);
#286=EDGE_CURVE('',#282,#287,#39,.T.);
#287=VERTEX_POINT('',#288);
#288=CARTESIAN_POINT('',(-3.5,2.31,0.));
#289=ORIENTED_EDGE('',*,*,#290,.T.);
#290=EDGE_CURVE('',#287,#291,#293,.T.);
#291=VERTEX_POINT('',#292);
#292=CARTESIAN_POINT('',(-3.5,2.31,0.17));
#293=LINE('',#288,#34);
#294=ORIENTED_EDGE('',*,*,#295,.F.);
#295=EDGE_CURVE('',#296,#291,#298,.T.);
#296=VERTEX_POINT('',#297);
#297=CARTESIAN_POINT('',(-3.5,2.49,0.17));
#298=LINE('',#297,#50);
#299=ORIENTED_EDGE('',*,*,#300,.F.);
#300=EDGE_CURVE('',#301,#296,#303,.T.);
#301=VERTEX_POINT('',#302);
#302=CARTESIAN_POINT('',(-3.5,2.49,0.));
#303=LINE('',#302,#34);
#304=ORIENTED_EDGE('',*,*,#305,.T.);
#305=EDGE_CURVE('',#301,#306,#39,.T.);
#306=VERTEX_POINT('',#307);
#307=CARTESIAN_POINT('',(-3.5,2.71,0.));
#308=ORIENTED_EDGE('',*,*,#309,.T.);
#309=EDGE_CURVE('',#306,#310,#312,.T.);
#310=VERTEX_POINT('',#311);
#311=CARTESIAN_POINT('',(-3.5,2.71,0.17));
#312=LINE('',#307,#34);
#313=ORIENTED_EDGE('',*,*,#314,.F.);
#314=EDGE_CURVE('',#315,#310,#317,.T.);
#315=VERTEX_POINT('',#316);
#316=CARTESIAN_POINT('',(-3.5,2.89,0.17));
#317=LINE('',#316,#50);
#318=ORIENTED_EDGE('',*,*,#319,.F.);
#319=EDGE_CURVE('',#320,#315,#322,.T.);
#320=VERTEX_POINT('',#321);
#321=CARTESIAN_POINT('',(-3.5,2.89,0.));
#322=LINE('',#321,#34);
#323=ORIENTED_EDGE('',*,*,#324,.T.);
#324=EDGE_CURVE('',#320,#325,#39,.T.);
#325=VERTEX_POINT('',#326);
#326=CARTESIAN_POINT('',(-3.5,3.5,0.));
#327=ORIENTED_EDGE('',*,*,#328,.T.);
#328=EDGE_CURVE('',#325,#24,#329,.T.);
#329=LINE('',#326,#34);
#330=PLANE('',#331);
#331=AXIS2_PLACEMENT_3D('',#32,#332,#13);
#332=DIRECTION('',(1.,0.,0.));
#333=ADVANCED_FACE('',(#334,#350),#359,.T.);
#334=FACE_BOUND('',#335,.T.);
#335=EDGE_LOOP('',(#20,#336,#342,#347));
#336=ORIENTED_EDGE('',*,*,#337,.T.);
#337=EDGE_CURVE('',#22,#338,#340,.T.);
#338=VERTEX_POINT('',#339);
#339=CARTESIAN_POINT('',(3.5,-3.5,0.9));
#340=LINE('',#23,#341);
#341=VECTOR('',#332,1.);
#342=ORIENTED_EDGE('',*,*,#343,.T.);
#343=EDGE_CURVE('',#338,#344,#346,.T.);
#344=VERTEX_POINT('',#345);
#345=CARTESIAN_POINT('',(3.5,3.5,0.9));
#346=LINE('',#339,#27);
#347=ORIENTED_EDGE('',*,*,#348,.F.);
#348=EDGE_CURVE('',#24,#344,#349,.T.);
#349=LINE('',#25,#341);
#350=FACE_BOUND('',#351,.T.);
#351=EDGE_LOOP('',(#352));
#352=ORIENTED_EDGE('',*,*,#353,.F.);
#353=EDGE_CURVE('',#354,#354,#356,.T.);
#354=VERTEX_POINT('',#355);
#355=CARTESIAN_POINT('',(-2.45,2.8,0.9));
#356=CIRCLE('',#357,0.35);
#357=AXIS2_PLACEMENT_3D('',#358,#13,#332);
#358=CARTESIAN_POINT('',(-2.8,2.8,0.9));
#359=PLANE('',#360);
#360=AXIS2_PLACEMENT_3D('',#23,#13,#332);
#361=ADVANCED_FACE('',(#362),#660,.T.);
#362=FACE_BOUND('',#363,.T.);
#363=EDGE_LOOP('',(#364,#327,#369,#370,#375,#379,#384,#391,#396,#400,#405,#410,#415,#419,#424,#429,#434,#438,#443,#448,#453,#457,#462,#467,#472,#476,#481,#486,#491,#495,#500,#505,#510,#514,#519,#524,#529,#533,#538,#543,#548,#552,#557,#562,#567,#571,#576,#581,#586,#590,#595,#600,#605,#609,#614,#619,#624,#628,#633,#638,#643,#647,#652,#657));
#364=ORIENTED_EDGE('',*,*,#365,.F.);
#365=EDGE_CURVE('',#325,#366,#368,.T.);
#366=VERTEX_POINT('',#367);
#367=CARTESIAN_POINT('',(-2.89,3.5,0.));
#368=LINE('',#326,#341);
#369=ORIENTED_EDGE('',*,*,#348,.T.);
#370=ORIENTED_EDGE('',*,*,#371,.F.);
#371=EDGE_CURVE('',#372,#344,#374,.T.);
#372=VERTEX_POINT('',#373);
#373=CARTESIAN_POINT('',(3.5,3.5,0.));
#374=LINE('',#373,#34);
#375=ORIENTED_EDGE('',*,*,#376,.F.);
#376=EDGE_CURVE('',#377,#372,#368,.T.);
#377=VERTEX_POINT('',#378);
#378=CARTESIAN_POINT('',(2.89,3.5,0.));
#379=ORIENTED_EDGE('',*,*,#380,.T.);
#380=EDGE_CURVE('',#377,#381,#383,.T.);
#381=VERTEX_POINT('',#382);
#382=CARTESIAN_POINT('',(2.89,3.5,0.17));
#383=LINE('',#378,#34);
#384=ORIENTED_EDGE('',*,*,#385,.T.);
#385=EDGE_CURVE('',#381,#386,#388,.T.);
#386=VERTEX_POINT('',#387);
#387=CARTESIAN_POINT('',(2.71,3.5,0.17));
#388=LINE('',#382,#389);
#389=VECTOR('',#390,1.);
#390=DIRECTION('',(-1.,0.,0.));
#391=ORIENTED_EDGE('',*,*,#392,.F.);
#392=EDGE_CURVE('',#393,#386,#395,.T.);
#393=VERTEX_POINT('',#394);
#394=CARTESIAN_POINT('',(2.71,3.5,0.));
#395=LINE('',#394,#34);
#396=ORIENTED_EDGE('',*,*,#397,.F.);
#397=EDGE_CURVE('',#398,#393,#368,.T.);
#398=VERTEX_POINT('',#399);
#399=CARTESIAN_POINT('',(2.49,3.5,0.));
#400=ORIENTED_EDGE('',*,*,#401,.T.);
#401=EDGE_CURVE('',#398,#402,#404,.T.);
#402=VERTEX_POINT('',#403);
#403=CARTESIAN_POINT('',(2.49,3.5,0.17));
#404=LINE('',#399,#34);
#405=ORIENTED_EDGE('',*,*,#406,.T.);
#406=EDGE_CURVE('',#402,#407,#409,.T.);
#407=VERTEX_POINT('',#408);
#408=CARTESIAN_POINT('',(2.31,3.5,0.17));
#409=LINE('',#403,#389);
#410=ORIENTED_EDGE('',*,*,#411,.F.);
#411=EDGE_CURVE('',#412,#407,#414,.T.);
#412=VERTEX_POINT('',#413);
#413=CARTESIAN_POINT('',(2.31,3.5,0.));
#414=LINE('',#413,#34);
#415=ORIENTED_EDGE('',*,*,#416,.F.);
#416=EDGE_CURVE('',#417,#412,#368,.T.);
#417=VERTEX_POINT('',#418);
#418=CARTESIAN_POINT('',(2.09,3.5,0.));
#419=ORIENTED_EDGE('',*,*,#420,.T.);
#420=EDGE_CURVE('',#417,#421,#423,.T.);
#421=VERTEX_POINT('',#422);
#422=CARTESIAN_POINT('',(2.09,3.5,0.17));
#423=LINE('',#418,#34);
#424=ORIENTED_EDGE('',*,*,#425,.T.);
#425=EDGE_CURVE('',#421,#426,#428,.T.);
#426=VERTEX_POINT('',#427);
#427=CARTESIAN_POINT('',(1.91,3.5,0.17));
#428=LINE('',#422,#389);
#429=ORIENTED_EDGE('',*,*,#430,.F.);
#430=EDGE_CURVE('',#431,#426,#433,.T.);
#431=VERTEX_POINT('',#432);
#432=CARTESIAN_POINT('',(1.91,3.5,0.));
#433=LINE('',#432,#34);
#434=ORIENTED_EDGE('',*,*,#435,.F.);
#435=EDGE_CURVE('',#436,#431,#368,.T.);
#436=VERTEX_POINT('',#437);
#437=CARTESIAN_POINT('',(1.69,3.5,0.));
#438=ORIENTED_EDGE('',*,*,#439,.T.);
#439=EDGE_CURVE('',#436,#440,#442,.T.);
#440=VERTEX_POINT('',#441);
#441=CARTESIAN_POINT('',(1.69,3.5,0.17));
#442=LINE('',#437,#34);
#443=ORIENTED_EDGE('',*,*,#444,.T.);
#444=EDGE_CURVE('',#440,#445,#447,.T.);
#445=VERTEX_POINT('',#446);
#446=CARTESIAN_POINT('',(1.51,3.5,0.17));
#447=LINE('',#441,#389);
#448=ORIENTED_EDGE('',*,*,#449,.F.);
#449=EDGE_CURVE('',#450,#445,#452,.T.);
#450=VERTEX_POINT('',#451);
#451=CARTESIAN_POINT('',(1.51,3.5,0.));
#452=LINE('',#451,#34);
#453=ORIENTED_EDGE('',*,*,#454,.F.);
#454=EDGE_CURVE('',#455,#450,#368,.T.);
#455=VERTEX_POINT('',#456);
#456=CARTESIAN_POINT('',(1.29,3.5,0.));
#457=ORIENTED_EDGE('',*,*,#458,.T.);
#458=EDGE_CURVE('',#455,#459,#461,.T.);
#459=VERTEX_POINT('',#460);
#460=CARTESIAN_POINT('',(1.29,3.5,0.17));
#461=LINE('',#456,#34);
#462=ORIENTED_EDGE('',*,*,#463,.T.);
#463=EDGE_CURVE('',#459,#464,#466,.T.);
#464=VERTEX_POINT('',#465);
#465=CARTESIAN_POINT('',(1.11,3.5,0.17));
#466=LINE('',#460,#389);
#467=ORIENTED_EDGE('',*,*,#468,.F.);
#468=EDGE_CURVE('',#469,#464,#471,.T.);
#469=VERTEX_POINT('',#470);
#470=CARTESIAN_POINT('',(1.11,3.5,0.));
#471=LINE('',#470,#34);
#472=ORIENTED_EDGE('',*,*,#473,.F.);
#473=EDGE_CURVE('',#474,#469,#368,.T.);
#474=VERTEX_POINT('',#475);
#475=CARTESIAN_POINT('',(0.89,3.5,0.));
#476=ORIENTED_EDGE('',*,*,#477,.T.);
#477=EDGE_CURVE('',#474,#478,#480,.T.);
#478=VERTEX_POINT('',#479);
#479=CARTESIAN_POINT('',(0.89,3.5,0.17));
#480=LINE('',#475,#34);
#481=ORIENTED_EDGE('',*,*,#482,.T.);
#482=EDGE_CURVE('',#478,#483,#485,.T.);
#483=VERTEX_POINT('',#484);
#484=CARTESIAN_POINT('',(0.71,3.5,0.17));
#485=LINE('',#479,#389);
#486=ORIENTED_EDGE('',*,*,#487,.F.);
#487=EDGE_CURVE('',#488,#483,#490,.T.);
#488=VERTEX_POINT('',#489);
#489=CARTESIAN_POINT('',(0.71,3.5,0.));
#490=LINE('',#489,#34);
#491=ORIENTED_EDGE('',*,*,#492,.F.);
#492=EDGE_CURVE('',#493,#488,#368,.T.);
#493=VERTEX_POINT('',#494);
#494=CARTESIAN_POINT('',(0.49,3.5,0.));
#495=ORIENTED_EDGE('',*,*,#496,.T.);
#496=EDGE_CURVE('',#493,#497,#499,.T.);
#497=VERTEX_POINT('',#498);
#498=CARTESIAN_POINT('',(0.49,3.5,0.17));
#499=LINE('',#494,#34);
#500=ORIENTED_EDGE('',*,*,#501,.T.);
#501=EDGE_CURVE('',#497,#502,#504,.T.);
#502=VERTEX_POINT('',#503);
#503=CARTESIAN_POINT('',(0.31,3.5,0.17));
#504=LINE('',#498,#389);
#505=ORIENTED_EDGE('',*,*,#506,.F.);
#506=EDGE_CURVE('',#507,#502,#509,.T.);
#507=VERTEX_POINT('',#508);
#508=CARTESIAN_POINT('',(0.31,3.5,0.));
#509=LINE('',#508,#34);
#510=ORIENTED_EDGE('',*,*,#511,.F.);
#511=EDGE_CURVE('',#512,#507,#368,.T.);
#512=VERTEX_POINT('',#513);
#513=CARTESIAN_POINT('',(9.E-02,3.5,0.));
#514=ORIENTED_EDGE('',*,*,#515,.T.);
#515=EDGE_CURVE('',#512,#516,#518,.T.);
#516=VERTEX_POINT('',#517);
#517=CARTESIAN_POINT('',(9.E-02,3.5,0.17));
#518=LINE('',#513,#34);
#519=ORIENTED_EDGE('',*,*,#520,.T.);
#520=EDGE_CURVE('',#516,#521,#523,.T.);
#521=VERTEX_POINT('',#522);
#522=CARTESIAN_POINT('',(-9.E-02,3.5,0.17));
#523=LINE('',#517,#389);
#524=ORIENTED_EDGE('',*,*,#525,.F.);
#525=EDGE_CURVE('',#526,#521,#528,.T.);
#526=VERTEX_POINT('',#527);
#527=CARTESIAN_POINT('',(-9.E-02,3.5,0.));
#528=LINE('',#527,#34);
#529=ORIENTED_EDGE('',*,*,#530,.F.);
#530=EDGE_CURVE('',#531,#526,#368,.T.);
#531=VERTEX_POINT('',#532);
#532=CARTESIAN_POINT('',(-0.31,3.5,0.));
#533=ORIENTED_EDGE('',*,*,#534,.T.);
#534=EDGE_CURVE('',#531,#535,#537,.T.);
#535=VERTEX_POINT('',#536);
#536=CARTESIAN_POINT('',(-0.31,3.5,0.17));
#537=LINE('',#532,#34);
#538=ORIENTED_EDGE('',*,*,#539,.T.);
#539=EDGE_CURVE('',#535,#540,#542,.T.);
#540=VERTEX_POINT('',#541);
#541=CARTESIAN_POINT('',(-0.49,3.5,0.17));
#542=LINE('',#536,#389);
#543=ORIENTED_EDGE('',*,*,#544,.F.);
#544=EDGE_CURVE('',#545,#540,#547,.T.);
#545=VERTEX_POINT('',#546);
#546=CARTESIAN_POINT('',(-0.49,3.5,0.));
#547=LINE('',#546,#34);
#548=ORIENTED_EDGE('',*,*,#549,.F.);
#549=EDGE_CURVE('',#550,#545,#368,.T.);
#550=VERTEX_POINT('',#551);
#551=CARTESIAN_POINT('',(-0.71,3.5,0.));
#552=ORIENTED_EDGE('',*,*,#553,.T.);
#553=EDGE_CURVE('',#550,#554,#556,.T.);
#554=VERTEX_POINT('',#555);
#555=CARTESIAN_POINT('',(-0.71,3.5,0.17));
#556=LINE('',#551,#34);
#557=ORIENTED_EDGE('',*,*,#558,.T.);
#558=EDGE_CURVE('',#554,#559,#561,.T.);
#559=VERTEX_POINT('',#560);
#560=CARTESIAN_POINT('',(-0.89,3.5,0.17));
#561=LINE('',#555,#389);
#562=ORIENTED_EDGE('',*,*,#563,.F.);
#563=EDGE_CURVE('',#564,#559,#566,.T.);
#564=VERTEX_POINT('',#565);
#565=CARTESIAN_POINT('',(-0.89,3.5,0.));
#566=LINE('',#565,#34);
#567=ORIENTED_EDGE('',*,*,#568,.F.);
#568=EDGE_CURVE('',#569,#564,#368,.T.);
#569=VERTEX_POINT('',#570);
#570=CARTESIAN_POINT('',(-1.11,3.5,0.));
#571=ORIENTED_EDGE('',*,*,#572,.T.);
#572=EDGE_CURVE('',#569,#573,#575,.T.);
#573=VERTEX_POINT('',#574);
#574=CARTESIAN_POINT('',(-1.11,3.5,0.17));
#575=LINE('',#570,#34);
#576=ORIENTED_EDGE('',*,*,#577,.T.);
#577=EDGE_CURVE('',#573,#578,#580,.T.);
#578=VERTEX_POINT('',#579);
#579=CARTESIAN_POINT('',(-1.29,3.5,0.17));
#580=LINE('',#574,#389);
#581=ORIENTED_EDGE('',*,*,#582,.F.);
#582=EDGE_CURVE('',#583,#578,#585,.T.);
#583=VERTEX_POINT('',#584);
#584=CARTESIAN_POINT('',(-1.29,3.5,0.));
#585=LINE('',#584,#34);
#586=ORIENTED_EDGE('',*,*,#587,.F.);
#587=EDGE_CURVE('',#588,#583,#368,.T.);
#588=VERTEX_POINT('',#589);
#589=CARTESIAN_POINT('',(-1.51,3.5,0.));
#590=ORIENTED_EDGE('',*,*,#591,.T.);
#591=EDGE_CURVE('',#588,#592,#594,.T.);
#592=VERTEX_POINT('',#593);
#593=CARTESIAN_POINT('',(-1.51,3.5,0.17));
#594=LINE('',#589,#34);
#595=ORIENTED_EDGE('',*,*,#596,.T.);
#596=EDGE_CURVE('',#592,#597,#599,.T.);
#597=VERTEX_POINT('',#598);
#598=CARTESIAN_POINT('',(-1.69,3.5,0.17));
#599=LINE('',#593,#389);
#600=ORIENTED_EDGE('',*,*,#601,.F.);
#601=EDGE_CURVE('',#602,#597,#604,.T.);
#602=VERTEX_POINT('',#603);
#603=CARTESIAN_POINT('',(-1.69,3.5,0.));
#604=LINE('',#603,#34);
#605=ORIENTED_EDGE('',*,*,#606,.F.);
#606=EDGE_CURVE('',#607,#602,#368,.T.);
#607=VERTEX_POINT('',#608);
#608=CARTESIAN_POINT('',(-1.91,3.5,0.));
#609=ORIENTED_EDGE('',*,*,#610,.T.);
#610=EDGE_CURVE('',#607,#611,#613,.T.);
#611=VERTEX_POINT('',#612);
#612=CARTESIAN_POINT('',(-1.91,3.5,0.17));
#613=LINE('',#608,#34);
#614=ORIENTED_EDGE('',*,*,#615,.T.);
#615=EDGE_CURVE('',#611,#616,#618,.T.);
#616=VERTEX_POINT('',#617);
#617=CARTESIAN_POINT('',(-2.09,3.5,0.17));
#618=LINE('',#612,#389);
#619=ORIENTED_EDGE('',*,*,#620,.F.);
#620=EDGE_CURVE('',#621,#616,#623,.T.);
#621=VERTEX_POINT('',#622);
#622=CARTESIAN_POINT('',(-2.09,3.5,0.));
#623=LINE('',#622,#34);
#624=ORIENTED_EDGE('',*,*,#625,.F.);
#625=EDGE_CURVE('',#626,#621,#368,.T.);
#626=VERTEX_POINT('',#627);
#627=CARTESIAN_POINT('',(-2.31,3.5,0.));
#628=ORIENTED_EDGE('',*,*,#629,.T.);
#629=EDGE_CURVE('',#626,#630,#632,.T.);
#630=VERTEX_POINT('',#631);
#631=CARTESIAN_POINT('',(-2.31,3.5,0.17));
#632=LINE('',#627,#34);
#633=ORIENTED_EDGE('',*,*,#634,.T.);
#634=EDGE_CURVE('',#630,#635,#637,.T.);
#635=VERTEX_POINT('',#636);
#636=CARTESIAN_POINT('',(-2.49,3.5,0.17));
#637=LINE('',#631,#389);
#638=ORIENTED_EDGE('',*,*,#639,.F.);
#639=EDGE_CURVE('',#640,#635,#642,.T.);
#640=VERTEX_POINT('',#641);
#641=CARTESIAN_POINT('',(-2.49,3.5,0.));
#642=LINE('',#641,#34);
#643=ORIENTED_EDGE('',*,*,#644,.F.);
#644=EDGE_CURVE('',#645,#640,#368,.T.);
#645=VERTEX_POINT('',#646);
#646=CARTESIAN_POINT('',(-2.71,3.5,0.));
#647=ORIENTED_EDGE('',*,*,#648,.T.);
#648=EDGE_CURVE('',#645,#649,#651,.T.);
#649=VERTEX_POINT('',#650);
#650=CARTESIAN_POINT('',(-2.71,3.5,0.17));
#651=LINE('',#646,#34);
#652=ORIENTED_EDGE('',*,*,#653,.T.);
#653=EDGE_CURVE('',#649,#654,#656,.T.);
#654=VERTEX_POINT('',#655);
#655=CARTESIAN_POINT('',(-2.89,3.5,0.17));
#656=LINE('',#650,#389);
#657=ORIENTED_EDGE('',*,*,#658,.F.);
#658=EDGE_CURVE('',#366,#654,#659,.T.);
#659=LINE('',#367,#34);
#660=PLANE('',#661);
#661=AXIS2_PLACEMENT_3D('',#326,#28,#13);
#662=ADVANCED_FACE('',(#663,#1791),#1815,.F.);
#663=FACE_BOUND('',#664,.F.);
#664=EDGE_LOOP('',(#665,#666,#671,#678,#687,#694,#698,#703,#710,#715,#719,#724,#731,#736,#740,#745,#752,#757,#761,#766,#773,#778,#782,#787,#794,#799,#803,#808,#815,#820,#824,#829,#836,#841,#845,#850,#857,#862,#866,#871,#878,#883,#887,#892,#899,#904,#908,#913,#920,#925,#929,#934,#941,#946,#950,#955,#962,#967,#971,#976,#983,#988,#992,#997,#1004,#1013,#1020,#1024,#1029,#1036,#1041,#1045,#1050,#1057,#1062,#1066,#1071,#1078,#1083,#1087,#1092,#1099,#1104,#1108,#1113,#1120,#1125,#1129,#1134,#1141,#1146,#1150,#1155,#1162,#1167,#1171,#1176,#1183,#1188,#1192,#1197,#1204,#1209,#1213,#1218,#1225,#1230,#1234,#1239,#1246,#1251,#1255,#1260,#1267,#1272,#1276,#1281,#1288,#1293,#1297,#1302,#1309,#1314,#375,#1316,#1323,#1331,#396,#1336,#1341,#1348,#415,#1351,#1356,#1363,#434,#1366,#1371,#1378,#453,#1381,#1386,#1393,#472,#1396,#1401,#1408,#491,#1411,#1416,#1423,#510,#1426,#1431,#1438,#529,#1441,#1446,#1453,#548,#1456,#1461,#1468,#567,#1471,#1476,#1483,#586,#1486,#1491,#1498,#605,#1501,#1506,#1513,#624,#1516,#1521,#1528,#643,#1531,#1536,#1543,#364,#1546,#1547,#1554,#1562,#1567,#1568,#1573,#1580,#1583,#1584,#1589,#1596,#1599,#1600,#1605,#1612,#1615,#1616,#1621,#1628,#1631,#1632,#1637,#1644,#1647,#1648,#1653,#1660,#1663,#1664,#1669,#1676,#1679,#1680,#1685,#1692,#1695,#1696,#1701,#1708,#1711,#1712,#1717,#1724,#1727,#1728,#1733,#1740,#1743,#1744,#1749,#1756,#1759,#1760,#1765,#1772,#1775,#1776,#1781,#1788));
#665=ORIENTED_EDGE('',*,*,#36,.F.);
#666=ORIENTED_EDGE('',*,*,#667,.T.);
#667=EDGE_CURVE('',#31,#668,#670,.T.);
#668=VERTEX_POINT('',#669);
#669=CARTESIAN_POINT('',(-2.89,-3.5,0.));
#670=LINE('',#32,#341);
#671=ORIENTED_EDGE('',*,*,#672,.F.);
#672=EDGE_CURVE('',#673,#668,#675,.T.);
#673=VERTEX_POINT('',#674);
#674=CARTESIAN_POINT('',(-2.89,-3.19,0.));
#675=LINE('',#674,#676);
#676=VECTOR('',#677,1.);
#677=DIRECTION('',(-7.769762247017E-17,-1.,0.));
#678=ORIENTED_EDGE('',*,*,#679,.F.);
#679=EDGE_CURVE('',#680,#673,#682,.T.);
#680=VERTEX_POINT('',#681);
#681=CARTESIAN_POINT('',(-2.71,-3.19,0.));
#682=CIRCLE('',#683,9.E-02);
#683=AXIS2_PLACEMENT_3D('',#684,#685,#686);
#684=CARTESIAN_POINT('',(-2.8,-3.19,0.));
#685=DIRECTION('',(-0.,0.,1.));
#686=DIRECTION('',(1.,-2.766623222238E-16,0.));
#687=ORIENTED_EDGE('',*,*,#688,.F.);
#688=EDGE_CURVE('',#689,#680,#691,.T.);
#689=VERTEX_POINT('',#690);
#690=CARTESIAN_POINT('',(-2.71,-3.5,0.));
#691=LINE('',#690,#692);
#692=VECTOR('',#693,1.);
#693=DIRECTION('',(1.672317373593E-16,1.,0.));
#694=ORIENTED_EDGE('',*,*,#695,.T.);
#695=EDGE_CURVE('',#689,#696,#670,.T.);
#696=VERTEX_POINT('',#697);
#697=CARTESIAN_POINT('',(-2.49,-3.5,0.));
#698=ORIENTED_EDGE('',*,*,#699,.F.);
#699=EDGE_CURVE('',#700,#696,#702,.T.);
#700=VERTEX_POINT('',#701);
#701=CARTESIAN_POINT('',(-2.49,-3.19,0.));
#702=LINE('',#701,#676);
#703=ORIENTED_EDGE('',*,*,#704,.F.);
#704=EDGE_CURVE('',#705,#700,#707,.T.);
#705=VERTEX_POINT('',#706);
#706=CARTESIAN_POINT('',(-2.31,-3.19,0.));
#707=CIRCLE('',#708,9.E-02);
#708=AXIS2_PLACEMENT_3D('',#709,#685,#686);
#709=CARTESIAN_POINT('',(-2.4,-3.19,0.));
#710=ORIENTED_EDGE('',*,*,#711,.F.);
#711=EDGE_CURVE('',#712,#705,#714,.T.);
#712=VERTEX_POINT('',#713);
#713=CARTESIAN_POINT('',(-2.31,-3.5,0.));
#714=LINE('',#713,#692);
#715=ORIENTED_EDGE('',*,*,#716,.T.);
#716=EDGE_CURVE('',#712,#717,#670,.T.);
#717=VERTEX_POINT('',#718);
#718=CARTESIAN_POINT('',(-2.09,-3.5,0.));
#719=ORIENTED_EDGE('',*,*,#720,.F.);
#720=EDGE_CURVE('',#721,#717,#723,.T.);
#721=VERTEX_POINT('',#722);
#722=CARTESIAN_POINT('',(-2.09,-3.19,0.));
#723=LINE('',#722,#676);
#724=ORIENTED_EDGE('',*,*,#725,.F.);
#725=EDGE_CURVE('',#726,#721,#728,.T.);
#726=VERTEX_POINT('',#727);
#727=CARTESIAN_POINT('',(-1.91,-3.19,0.));
#728=CIRCLE('',#729,9.E-02);
#729=AXIS2_PLACEMENT_3D('',#730,#685,#686);
#730=CARTESIAN_POINT('',(-2.,-3.19,0.));
#731=ORIENTED_EDGE('',*,*,#732,.F.);
#732=EDGE_CURVE('',#733,#726,#735,.T.);
#733=VERTEX_POINT('',#734);
#734=CARTESIAN_POINT('',(-1.91,-3.5,0.));
#735=LINE('',#734,#692);
#736=ORIENTED_EDGE('',*,*,#737,.T.);
#737=EDGE_CURVE('',#733,#738,#670,.T.);
#738=VERTEX_POINT('',#739);
#739=CARTESIAN_POINT('',(-1.69,-3.5,0.));
#740=ORIENTED_EDGE('',*,*,#741,.F.);
#741=EDGE_CURVE('',#742,#738,#744,.T.);
#742=VERTEX_POINT('',#743);
#743=CARTESIAN_POINT('',(-1.69,-3.19,0.));
#744=LINE('',#743,#676);
#745=ORIENTED_EDGE('',*,*,#746,.F.);
#746=EDGE_CURVE('',#747,#742,#749,.T.);
#747=VERTEX_POINT('',#748);
#748=CARTESIAN_POINT('',(-1.51,-3.19,0.));
#749=CIRCLE('',#750,9.E-02);
#750=AXIS2_PLACEMENT_3D('',#751,#685,#686);
#751=CARTESIAN_POINT('',(-1.6,-3.19,0.));
#752=ORIENTED_EDGE('',*,*,#753,.F.);
#753=EDGE_CURVE('',#754,#747,#756,.T.);
#754=VERTEX_POINT('',#755);
#755=CARTESIAN_POINT('',(-1.51,-3.5,0.));
#756=LINE('',#755,#692);
#757=ORIENTED_EDGE('',*,*,#758,.T.);
#758=EDGE_CURVE('',#754,#759,#670,.T.);
#759=VERTEX_POINT('',#760);
#760=CARTESIAN_POINT('',(-1.29,-3.5,0.));
#761=ORIENTED_EDGE('',*,*,#762,.F.);
#762=EDGE_CURVE('',#763,#759,#765,.T.);
#763=VERTEX_POINT('',#764);
#764=CARTESIAN_POINT('',(-1.29,-3.19,0.));
#765=LINE('',#764,#676);
#766=ORIENTED_EDGE('',*,*,#767,.F.);
#767=EDGE_CURVE('',#768,#763,#770,.T.);
#768=VERTEX_POINT('',#769);
#769=CARTESIAN_POINT('',(-1.11,-3.19,0.));
#770=CIRCLE('',#771,9.E-02);
#771=AXIS2_PLACEMENT_3D('',#772,#685,#686);
#772=CARTESIAN_POINT('',(-1.2,-3.19,0.));
#773=ORIENTED_EDGE('',*,*,#774,.F.);
#774=EDGE_CURVE('',#775,#768,#777,.T.);
#775=VERTEX_POINT('',#776);
#776=CARTESIAN_POINT('',(-1.11,-3.5,0.));
#777=LINE('',#776,#692);
#778=ORIENTED_EDGE('',*,*,#779,.T.);
#779=EDGE_CURVE('',#775,#780,#670,.T.);
#780=VERTEX_POINT('',#781);
#781=CARTESIAN_POINT('',(-0.89,-3.5,0.));
#782=ORIENTED_EDGE('',*,*,#783,.F.);
#783=EDGE_CURVE('',#784,#780,#786,.T.);
#784=VERTEX_POINT('',#785);
#785=CARTESIAN_POINT('',(-0.89,-3.19,0.));
#786=LINE('',#785,#676);
#787=ORIENTED_EDGE('',*,*,#788,.F.);
#788=EDGE_CURVE('',#789,#784,#791,.T.);
#789=VERTEX_POINT('',#790);
#790=CARTESIAN_POINT('',(-0.71,-3.19,0.));
#791=CIRCLE('',#792,9.E-02);
#792=AXIS2_PLACEMENT_3D('',#793,#685,#686);
#793=CARTESIAN_POINT('',(-0.8,-3.19,0.));
#794=ORIENTED_EDGE('',*,*,#795,.F.);
#795=EDGE_CURVE('',#796,#789,#798,.T.);
#796=VERTEX_POINT('',#797);
#797=CARTESIAN_POINT('',(-0.71,-3.5,0.));
#798=LINE('',#797,#692);
#799=ORIENTED_EDGE('',*,*,#800,.T.);
#800=EDGE_CURVE('',#796,#801,#670,.T.);
#801=VERTEX_POINT('',#802);
#802=CARTESIAN_POINT('',(-0.49,-3.5,0.));
#803=ORIENTED_EDGE('',*,*,#804,.F.);
#804=EDGE_CURVE('',#805,#801,#807,.T.);
#805=VERTEX_POINT('',#806);
#806=CARTESIAN_POINT('',(-0.49,-3.19,0.));
#807=LINE('',#806,#676);
#808=ORIENTED_EDGE('',*,*,#809,.F.);
#809=EDGE_CURVE('',#810,#805,#812,.T.);
#810=VERTEX_POINT('',#811);
#811=CARTESIAN_POINT('',(-0.31,-3.19,0.));
#812=CIRCLE('',#813,9.E-02);
#813=AXIS2_PLACEMENT_3D('',#814,#685,#686);
#814=CARTESIAN_POINT('',(-0.4,-3.19,0.));
#815=ORIENTED_EDGE('',*,*,#816,.F.);
#816=EDGE_CURVE('',#817,#810,#819,.T.);
#817=VERTEX_POINT('',#818);
#818=CARTESIAN_POINT('',(-0.31,-3.5,0.));
#819=LINE('',#818,#692);
#820=ORIENTED_EDGE('',*,*,#821,.T.);
#821=EDGE_CURVE('',#817,#822,#670,.T.);
#822=VERTEX_POINT('',#823);
#823=CARTESIAN_POINT('',(-9.E-02,-3.5,0.));
#824=ORIENTED_EDGE('',*,*,#825,.F.);
#825=EDGE_CURVE('',#826,#822,#828,.T.);
#826=VERTEX_POINT('',#827);
#827=CARTESIAN_POINT('',(-9.E-02,-3.19,0.));
#828=LINE('',#827,#676);
#829=ORIENTED_EDGE('',*,*,#830,.F.);
#830=EDGE_CURVE('',#831,#826,#833,.T.);
#831=VERTEX_POINT('',#832);
#832=CARTESIAN_POINT('',(9.E-02,-3.19,0.));
#833=CIRCLE('',#834,9.E-02);
#834=AXIS2_PLACEMENT_3D('',#835,#685,#686);
#835=CARTESIAN_POINT('',(1.347111479062E-17,-3.19,0.));
#836=ORIENTED_EDGE('',*,*,#837,.F.);
#837=EDGE_CURVE('',#838,#831,#840,.T.);
#838=VERTEX_POINT('',#839);
#839=CARTESIAN_POINT('',(9.E-02,-3.5,0.));
#840=LINE('',#839,#692);
#841=ORIENTED_EDGE('',*,*,#842,.T.);
#842=EDGE_CURVE('',#838,#843,#670,.T.);
#843=VERTEX_POINT('',#844);
#844=CARTESIAN_POINT('',(0.31,-3.5,0.));
#845=ORIENTED_EDGE('',*,*,#846,.F.);
#846=EDGE_CURVE('',#847,#843,#849,.T.);
#847=VERTEX_POINT('',#848);
#848=CARTESIAN_POINT('',(0.31,-3.19,0.));
#849=LINE('',#848,#676);
#850=ORIENTED_EDGE('',*,*,#851,.F.);
#851=EDGE_CURVE('',#852,#847,#854,.T.);
#852=VERTEX_POINT('',#853);
#853=CARTESIAN_POINT('',(0.49,-3.19,0.));
#854=CIRCLE('',#855,9.E-02);
#855=AXIS2_PLACEMENT_3D('',#856,#685,#686);
#856=CARTESIAN_POINT('',(0.4,-3.19,0.));
#857=ORIENTED_EDGE('',*,*,#858,.F.);
#858=EDGE_CURVE('',#859,#852,#861,.T.);
#859=VERTEX_POINT('',#860);
#860=CARTESIAN_POINT('',(0.49,-3.5,0.));
#861=LINE('',#860,#692);
#862=ORIENTED_EDGE('',*,*,#863,.T.);
#863=EDGE_CURVE('',#859,#864,#670,.T.);
#864=VERTEX_POINT('',#865);
#865=CARTESIAN_POINT('',(0.71,-3.5,0.));
#866=ORIENTED_EDGE('',*,*,#867,.F.);
#867=EDGE_CURVE('',#868,#864,#870,.T.);
#868=VERTEX_POINT('',#869);
#869=CARTESIAN_POINT('',(0.71,-3.19,0.));
#870=LINE('',#869,#676);
#871=ORIENTED_EDGE('',*,*,#872,.F.);
#872=EDGE_CURVE('',#873,#868,#875,.T.);
#873=VERTEX_POINT('',#874);
#874=CARTESIAN_POINT('',(0.89,-3.19,0.));
#875=CIRCLE('',#876,9.E-02);
#876=AXIS2_PLACEMENT_3D('',#877,#685,#686);
#877=CARTESIAN_POINT('',(0.8,-3.19,0.));
#878=ORIENTED_EDGE('',*,*,#879,.F.);
#879=EDGE_CURVE('',#880,#873,#882,.T.);
#880=VERTEX_POINT('',#881);
#881=CARTESIAN_POINT('',(0.89,-3.5,0.));
#882=LINE('',#881,#692);
#883=ORIENTED_EDGE('',*,*,#884,.T.);
#884=EDGE_CURVE('',#880,#885,#670,.T.);
#885=VERTEX_POINT('',#886);
#886=CARTESIAN_POINT('',(1.11,-3.5,0.));
#887=ORIENTED_EDGE('',*,*,#888,.F.);
#888=EDGE_CURVE('',#889,#885,#891,.T.);
#889=VERTEX_POINT('',#890);
#890=CARTESIAN_POINT('',(1.11,-3.19,0.));
#891=LINE('',#890,#676);
#892=ORIENTED_EDGE('',*,*,#893,.F.);
#893=EDGE_CURVE('',#894,#889,#896,.T.);
#894=VERTEX_POINT('',#895);
#895=CARTESIAN_POINT('',(1.29,-3.19,0.));
#896=CIRCLE('',#897,9.E-02);
#897=AXIS2_PLACEMENT_3D('',#898,#685,#686);
#898=CARTESIAN_POINT('',(1.2,-3.19,0.));
#899=ORIENTED_EDGE('',*,*,#900,.F.);
#900=EDGE_CURVE('',#901,#894,#903,.T.);
#901=VERTEX_POINT('',#902);
#902=CARTESIAN_POINT('',(1.29,-3.5,0.));
#903=LINE('',#902,#692);
#904=ORIENTED_EDGE('',*,*,#905,.T.);
#905=EDGE_CURVE('',#901,#906,#670,.T.);
#906=VERTEX_POINT('',#907);
#907=CARTESIAN_POINT('',(1.51,-3.5,0.));
#908=ORIENTED_EDGE('',*,*,#909,.F.);
#909=EDGE_CURVE('',#910,#906,#912,.T.);
#910=VERTEX_POINT('',#911);
#911=CARTESIAN_POINT('',(1.51,-3.19,0.));
#912=LINE('',#911,#676);
#913=ORIENTED_EDGE('',*,*,#914,.F.);
#914=EDGE_CURVE('',#915,#910,#917,.T.);
#915=VERTEX_POINT('',#916);
#916=CARTESIAN_POINT('',(1.69,-3.19,0.));
#917=CIRCLE('',#918,9.E-02);
#918=AXIS2_PLACEMENT_3D('',#919,#685,#686);
#919=CARTESIAN_POINT('',(1.6,-3.19,0.));
#920=ORIENTED_EDGE('',*,*,#921,.F.);
#921=EDGE_CURVE('',#922,#915,#924,.T.);
#922=VERTEX_POINT('',#923);
#923=CARTESIAN_POINT('',(1.69,-3.5,0.));
#924=LINE('',#923,#692);
#925=ORIENTED_EDGE('',*,*,#926,.T.);
#926=EDGE_CURVE('',#922,#927,#670,.T.);
#927=VERTEX_POINT('',#928);
#928=CARTESIAN_POINT('',(1.91,-3.5,0.));
#929=ORIENTED_EDGE('',*,*,#930,.F.);
#930=EDGE_CURVE('',#931,#927,#933,.T.);
#931=VERTEX_POINT('',#932);
#932=CARTESIAN_POINT('',(1.91,-3.19,0.));
#933=LINE('',#932,#676);
#934=ORIENTED_EDGE('',*,*,#935,.F.);
#935=EDGE_CURVE('',#936,#931,#938,.T.);
#936=VERTEX_POINT('',#937);
#937=CARTESIAN_POINT('',(2.09,-3.19,0.));
#938=CIRCLE('',#939,9.E-02);
#939=AXIS2_PLACEMENT_3D('',#940,#685,#686);
#940=CARTESIAN_POINT('',(2.,-3.19,0.));
#941=ORIENTED_EDGE('',*,*,#942,.F.);
#942=EDGE_CURVE('',#943,#936,#945,.T.);
#943=VERTEX_POINT('',#944);
#944=CARTESIAN_POINT('',(2.09,-3.5,0.));
#945=LINE('',#944,#692);
#946=ORIENTED_EDGE('',*,*,#947,.T.);
#947=EDGE_CURVE('',#943,#948,#670,.T.);
#948=VERTEX_POINT('',#949);
#949=CARTESIAN_POINT('',(2.31,-3.5,0.));
#950=ORIENTED_EDGE('',*,*,#951,.F.);
#951=EDGE_CURVE('',#952,#948,#954,.T.);
#952=VERTEX_POINT('',#953);
#953=CARTESIAN_POINT('',(2.31,-3.19,0.));
#954=LINE('',#953,#676);
#955=ORIENTED_EDGE('',*,*,#956,.F.);
#956=EDGE_CURVE('',#957,#952,#959,.T.);
#957=VERTEX_POINT('',#958);
#958=CARTESIAN_POINT('',(2.49,-3.19,0.));
#959=CIRCLE('',#960,9.E-02);
#960=AXIS2_PLACEMENT_3D('',#961,#685,#686);
#961=CARTESIAN_POINT('',(2.4,-3.19,0.));
#962=ORIENTED_EDGE('',*,*,#963,.F.);
#963=EDGE_CURVE('',#964,#957,#966,.T.);
#964=VERTEX_POINT('',#965);
#965=CARTESIAN_POINT('',(2.49,-3.5,0.));
#966=LINE('',#965,#692);
#967=ORIENTED_EDGE('',*,*,#968,.T.);
#968=EDGE_CURVE('',#964,#969,#670,.T.);
#969=VERTEX_POINT('',#970);
#970=CARTESIAN_POINT('',(2.71,-3.5,0.));
#971=ORIENTED_EDGE('',*,*,#972,.F.);
#972=EDGE_CURVE('',#973,#969,#975,.T.);
#973=VERTEX_POINT('',#974);
#974=CARTESIAN_POINT('',(2.71,-3.19,0.));
#975=LINE('',#974,#676);
#976=ORIENTED_EDGE('',*,*,#977,.F.);
#977=EDGE_CURVE('',#978,#973,#980,.T.);
#978=VERTEX_POINT('',#979);
#979=CARTESIAN_POINT('',(2.89,-3.19,0.));
#980=CIRCLE('',#981,9.E-02);
#981=AXIS2_PLACEMENT_3D('',#982,#685,#686);
#982=CARTESIAN_POINT('',(2.8,-3.19,0.));
#983=ORIENTED_EDGE('',*,*,#984,.F.);
#984=EDGE_CURVE('',#985,#978,#987,.T.);
#985=VERTEX_POINT('',#986);
#986=CARTESIAN_POINT('',(2.89,-3.5,0.));
#987=LINE('',#986,#692);
#988=ORIENTED_EDGE('',*,*,#989,.T.);
#989=EDGE_CURVE('',#985,#990,#670,.T.);
#990=VERTEX_POINT('',#991);
#991=CARTESIAN_POINT('',(3.5,-3.5,0.));
#992=ORIENTED_EDGE('',*,*,#993,.T.);
#993=EDGE_CURVE('',#990,#994,#996,.T.);
#994=VERTEX_POINT('',#995);
#995=CARTESIAN_POINT('',(3.5,-2.89,0.));
#996=LINE('',#991,#27);
#997=ORIENTED_EDGE('',*,*,#998,.F.);
#998=EDGE_CURVE('',#999,#994,#1001,.T.);
#999=VERTEX_POINT('',#1000);
#1000=CARTESIAN_POINT('',(3.19,-2.89,0.));
#1001=LINE('',#1000,#1002);
#1002=VECTOR('',#1003,1.);
#1003=DIRECTION('',(1.,-1.772775474805E-16,0.));
#1004=ORIENTED_EDGE('',*,*,#1005,.F.);
#1005=EDGE_CURVE('',#1006,#999,#1008,.T.);
#1006=VERTEX_POINT('',#1007);
#1007=CARTESIAN_POINT('',(3.19,-2.71,0.));
#1008=CIRCLE('',#1009,9.E-02);
#1009=AXIS2_PLACEMENT_3D('',#1010,#1011,#1012);
#1010=CARTESIAN_POINT('',(3.19,-2.8,0.));
#1011=DIRECTION('',(0.,-0.,1.));
#1012=DIRECTION('',(3.762422472341E-16,1.,0.));
#1013=ORIENTED_EDGE('',*,*,#1014,.F.);
#1014=EDGE_CURVE('',#1015,#1006,#1017,.T.);
#1015=VERTEX_POINT('',#1016);
#1016=CARTESIAN_POINT('',(3.5,-2.71,0.));
#1017=LINE('',#1016,#1018);
#1018=VECTOR('',#1019,1.);
#1019=DIRECTION('',(-1.,2.668116623696E-16,0.));
#1020=ORIENTED_EDGE('',*,*,#1021,.T.);
#1021=EDGE_CURVE('',#1015,#1022,#996,.T.);
#1022=VERTEX_POINT('',#1023);
#1023=CARTESIAN_POINT('',(3.5,-2.49,0.));
#1024=ORIENTED_EDGE('',*,*,#1025,.F.);
#1025=EDGE_CURVE('',#1026,#1022,#1028,.T.);
#1026=VERTEX_POINT('',#1027);
#1027=CARTESIAN_POINT('',(3.19,-2.49,0.));
#1028=LINE('',#1027,#1002);
#1029=ORIENTED_EDGE('',*,*,#1030,.F.);
#1030=EDGE_CURVE('',#1031,#1026,#1033,.T.);
#1031=VERTEX_POINT('',#1032);
#1032=CARTESIAN_POINT('',(3.19,-2.31,0.));
#1033=CIRCLE('',#1034,9.E-02);
#1034=AXIS2_PLACEMENT_3D('',#1035,#1011,#1012);
#1035=CARTESIAN_POINT('',(3.19,-2.4,0.));
#1036=ORIENTED_EDGE('',*,*,#1037,.F.);
#1037=EDGE_CURVE('',#1038,#1031,#1040,.T.);
#1038=VERTEX_POINT('',#1039);
#1039=CARTESIAN_POINT('',(3.5,-2.31,0.));
#1040=LINE('',#1039,#1018);
#1041=ORIENTED_EDGE('',*,*,#1042,.T.);
#1042=EDGE_CURVE('',#1038,#1043,#996,.T.);
#1043=VERTEX_POINT('',#1044);
#1044=CARTESIAN_POINT('',(3.5,-2.09,0.));
#1045=ORIENTED_EDGE('',*,*,#1046,.F.);
#1046=EDGE_CURVE('',#1047,#1043,#1049,.T.);
#1047=VERTEX_POINT('',#1048);
#1048=CARTESIAN_POINT('',(3.19,-2.09,0.));
#1049=LINE('',#1048,#1002);
#1050=ORIENTED_EDGE('',*,*,#1051,.F.);
#1051=EDGE_CURVE('',#1052,#1047,#1054,.T.);
#1052=VERTEX_POINT('',#1053);
#1053=CARTESIAN_POINT('',(3.19,-1.91,0.));
#1054=CIRCLE('',#1055,9.E-02);
#1055=AXIS2_PLACEMENT_3D('',#1056,#1011,#1012);
#1056=CARTESIAN_POINT('',(3.19,-2.,0.));
#1057=ORIENTED_EDGE('',*,*,#1058,.F.);
#1058=EDGE_CURVE('',#1059,#1052,#1061,.T.);
#1059=VERTEX_POINT('',#1060);
#1060=CARTESIAN_POINT('',(3.5,-1.91,0.));
#1061=LINE('',#1060,#1018);
#1062=ORIENTED_EDGE('',*,*,#1063,.T.);
#1063=EDGE_CURVE('',#1059,#1064,#996,.T.);
#1064=VERTEX_POINT('',#1065);
#1065=CARTESIAN_POINT('',(3.5,-1.69,0.));
#1066=ORIENTED_EDGE('',*,*,#1067,.F.);
#1067=EDGE_CURVE('',#1068,#1064,#1070,.T.);
#1068=VERTEX_POINT('',#1069);
#1069=CARTESIAN_POINT('',(3.19,-1.69,0.));
#1070=LINE('',#1069,#1002);
#1071=ORIENTED_EDGE('',*,*,#1072,.F.);
#1072=EDGE_CURVE('',#1073,#1068,#1075,.T.);
#1073=VERTEX_POINT('',#1074);
#1074=CARTESIAN_POINT('',(3.19,-1.51,0.));
#1075=CIRCLE('',#1076,9.E-02);
#1076=AXIS2_PLACEMENT_3D('',#1077,#1011,#1012);
#1077=CARTESIAN_POINT('',(3.19,-1.6,0.));
#1078=ORIENTED_EDGE('',*,*,#1079,.F.);
#1079=EDGE_CURVE('',#1080,#1073,#1082,.T.);
#1080=VERTEX_POINT('',#1081);
#1081=CARTESIAN_POINT('',(3.5,-1.51,0.));
#1082=LINE('',#1081,#1018);
#1083=ORIENTED_EDGE('',*,*,#1084,.T.);
#1084=EDGE_CURVE('',#1080,#1085,#996,.T.);
#1085=VERTEX_POINT('',#1086);
#1086=CARTESIAN_POINT('',(3.5,-1.29,0.));
#1087=ORIENTED_EDGE('',*,*,#1088,.F.);
#1088=EDGE_CURVE('',#1089,#1085,#1091,.T.);
#1089=VERTEX_POINT('',#1090);
#1090=CARTESIAN_POINT('',(3.19,-1.29,0.));
#1091=LINE('',#1090,#1002);
#1092=ORIENTED_EDGE('',*,*,#1093,.F.);
#1093=EDGE_CURVE('',#1094,#1089,#1096,.T.);
#1094=VERTEX_POINT('',#1095);
#1095=CARTESIAN_POINT('',(3.19,-1.11,0.));
#1096=CIRCLE('',#1097,9.E-02);
#1097=AXIS2_PLACEMENT_3D('',#1098,#1011,#1012);
#1098=CARTESIAN_POINT('',(3.19,-1.2,0.));
#1099=ORIENTED_EDGE('',*,*,#1100,.F.);
#1100=EDGE_CURVE('',#1101,#1094,#1103,.T.);
#1101=VERTEX_POINT('',#1102);
#1102=CARTESIAN_POINT('',(3.5,-1.11,0.));
#1103=LINE('',#1102,#1018);
#1104=ORIENTED_EDGE('',*,*,#1105,.T.);
#1105=EDGE_CURVE('',#1101,#1106,#996,.T.);
#1106=VERTEX_POINT('',#1107);
#1107=CARTESIAN_POINT('',(3.5,-0.89,0.));
#1108=ORIENTED_EDGE('',*,*,#1109,.F.);
#1109=EDGE_CURVE('',#1110,#1106,#1112,.T.);
#1110=VERTEX_POINT('',#1111);
#1111=CARTESIAN_POINT('',(3.19,-0.89,0.));
#1112=LINE('',#1111,#1002);
#1113=ORIENTED_EDGE('',*,*,#1114,.F.);
#1114=EDGE_CURVE('',#1115,#1110,#1117,.T.);
#1115=VERTEX_POINT('',#1116);
#1116=CARTESIAN_POINT('',(3.19,-0.71,0.));
#1117=CIRCLE('',#1118,9.E-02);
#1118=AXIS2_PLACEMENT_3D('',#1119,#1011,#1012);
#1119=CARTESIAN_POINT('',(3.19,-0.8,0.));
#1120=ORIENTED_EDGE('',*,*,#1121,.F.);
#1121=EDGE_CURVE('',#1122,#1115,#1124,.T.);
#1122=VERTEX_POINT('',#1123);
#1123=CARTESIAN_POINT('',(3.5,-0.71,0.));
#1124=LINE('',#1123,#1018);
#1125=ORIENTED_EDGE('',*,*,#1126,.T.);
#1126=EDGE_CURVE('',#1122,#1127,#996,.T.);
#1127=VERTEX_POINT('',#1128);
#1128=CARTESIAN_POINT('',(3.5,-0.49,0.));
#1129=ORIENTED_EDGE('',*,*,#1130,.F.);
#1130=EDGE_CURVE('',#1131,#1127,#1133,.T.);
#1131=VERTEX_POINT('',#1132);
#1132=CARTESIAN_POINT('',(3.19,-0.49,0.));
#1133=LINE('',#1132,#1002);
#1134=ORIENTED_EDGE('',*,*,#1135,.F.);
#1135=EDGE_CURVE('',#1136,#1131,#1138,.T.);
#1136=VERTEX_POINT('',#1137);
#1137=CARTESIAN_POINT('',(3.19,-0.31,0.));
#1138=CIRCLE('',#1139,9.E-02);
#1139=AXIS2_PLACEMENT_3D('',#1140,#1011,#1012);
#1140=CARTESIAN_POINT('',(3.19,-0.4,0.));
#1141=ORIENTED_EDGE('',*,*,#1142,.F.);
#1142=EDGE_CURVE('',#1143,#1136,#1145,.T.);
#1143=VERTEX_POINT('',#1144);
#1144=CARTESIAN_POINT('',(3.5,-0.31,0.));
#1145=LINE('',#1144,#1018);
#1146=ORIENTED_EDGE('',*,*,#1147,.T.);
#1147=EDGE_CURVE('',#1143,#1148,#996,.T.);
#1148=VERTEX_POINT('',#1149);
#1149=CARTESIAN_POINT('',(3.5,-9.E-02,0.));
#1150=ORIENTED_EDGE('',*,*,#1151,.F.);
#1151=EDGE_CURVE('',#1152,#1148,#1154,.T.);
#1152=VERTEX_POINT('',#1153);
#1153=CARTESIAN_POINT('',(3.19,-9.E-02,0.));
#1154=LINE('',#1153,#1002);
#1155=ORIENTED_EDGE('',*,*,#1156,.F.);
#1156=EDGE_CURVE('',#1157,#1152,#1159,.T.);
#1157=VERTEX_POINT('',#1158);
#1158=CARTESIAN_POINT('',(3.19,9.E-02,0.));
#1159=CIRCLE('',#1160,9.E-02);
#1160=AXIS2_PLACEMENT_3D('',#1161,#1011,#1012);
#1161=CARTESIAN_POINT('',(3.19,2.442490654175E-17,0.));
#1162=ORIENTED_EDGE('',*,*,#1163,.F.);
#1163=EDGE_CURVE('',#1164,#1157,#1166,.T.);
#1164=VERTEX_POINT('',#1165);
#1165=CARTESIAN_POINT('',(3.5,9.E-02,0.));
#1166=LINE('',#1165,#1018);
#1167=ORIENTED_EDGE('',*,*,#1168,.T.);
#1168=EDGE_CURVE('',#1164,#1169,#996,.T.);
#1169=VERTEX_POINT('',#1170);
#1170=CARTESIAN_POINT('',(3.5,0.31,0.));
#1171=ORIENTED_EDGE('',*,*,#1172,.F.);
#1172=EDGE_CURVE('',#1173,#1169,#1175,.T.);
#1173=VERTEX_POINT('',#1174);
#1174=CARTESIAN_POINT('',(3.19,0.31,0.));
#1175=LINE('',#1174,#1002);
#1176=ORIENTED_EDGE('',*,*,#1177,.F.);
#1177=EDGE_CURVE('',#1178,#1173,#1180,.T.);
#1178=VERTEX_POINT('',#1179);
#1179=CARTESIAN_POINT('',(3.19,0.49,0.));
#1180=CIRCLE('',#1181,9.E-02);
#1181=AXIS2_PLACEMENT_3D('',#1182,#1011,#1012);
#1182=CARTESIAN_POINT('',(3.19,0.4,0.));
#1183=ORIENTED_EDGE('',*,*,#1184,.F.);
#1184=EDGE_CURVE('',#1185,#1178,#1187,.T.);
#1185=VERTEX_POINT('',#1186);
#1186=CARTESIAN_POINT('',(3.5,0.49,0.));
#1187=LINE('',#1186,#1018);
#1188=ORIENTED_EDGE('',*,*,#1189,.T.);
#1189=EDGE_CURVE('',#1185,#1190,#996,.T.);
#1190=VERTEX_POINT('',#1191);
#1191=CARTESIAN_POINT('',(3.5,0.71,0.));
#1192=ORIENTED_EDGE('',*,*,#1193,.F.);
#1193=EDGE_CURVE('',#1194,#1190,#1196,.T.);
#1194=VERTEX_POINT('',#1195);
#1195=CARTESIAN_POINT('',(3.19,0.71,0.));
#1196=LINE('',#1195,#1002);
#1197=ORIENTED_EDGE('',*,*,#1198,.F.);
#1198=EDGE_CURVE('',#1199,#1194,#1201,.T.);
#1199=VERTEX_POINT('',#1200);
#1200=CARTESIAN_POINT('',(3.19,0.89,0.));
#1201=CIRCLE('',#1202,9.E-02);
#1202=AXIS2_PLACEMENT_3D('',#1203,#1011,#1012);
#1203=CARTESIAN_POINT('',(3.19,0.8,0.));
#1204=ORIENTED_EDGE('',*,*,#1205,.F.);
#1205=EDGE_CURVE('',#1206,#1199,#1208,.T.);
#1206=VERTEX_POINT('',#1207);
#1207=CARTESIAN_POINT('',(3.5,0.89,0.));
#1208=LINE('',#1207,#1018);
#1209=ORIENTED_EDGE('',*,*,#1210,.T.);
#1210=EDGE_CURVE('',#1206,#1211,#996,.T.);
#1211=VERTEX_POINT('',#1212);
#1212=CARTESIAN_POINT('',(3.5,1.11,0.));
#1213=ORIENTED_EDGE('',*,*,#1214,.F.);
#1214=EDGE_CURVE('',#1215,#1211,#1217,.T.);
#1215=VERTEX_POINT('',#1216);
#1216=CARTESIAN_POINT('',(3.19,1.11,0.));
#1217=LINE('',#1216,#1002);
#1218=ORIENTED_EDGE('',*,*,#1219,.F.);
#1219=EDGE_CURVE('',#1220,#1215,#1222,.T.);
#1220=VERTEX_POINT('',#1221);
#1221=CARTESIAN_POINT('',(3.19,1.29,0.));
#1222=CIRCLE('',#1223,9.E-02);
#1223=AXIS2_PLACEMENT_3D('',#1224,#1011,#1012);
#1224=CARTESIAN_POINT('',(3.19,1.2,0.));
#1225=ORIENTED_EDGE('',*,*,#1226,.F.);
#1226=EDGE_CURVE('',#1227,#1220,#1229,.T.);
#1227=VERTEX_POINT('',#1228);
#1228=CARTESIAN_POINT('',(3.5,1.29,0.));
#1229=LINE('',#1228,#1018);
#1230=ORIENTED_EDGE('',*,*,#1231,.T.);
#1231=EDGE_CURVE('',#1227,#1232,#996,.T.);
#1232=VERTEX_POINT('',#1233);
#1233=CARTESIAN_POINT('',(3.5,1.51,0.));
#1234=ORIENTED_EDGE('',*,*,#1235,.F.);
#1235=EDGE_CURVE('',#1236,#1232,#1238,.T.);
#1236=VERTEX_POINT('',#1237);
#1237=CARTESIAN_POINT('',(3.19,1.51,0.));
#1238=LINE('',#1237,#1002);
#1239=ORIENTED_EDGE('',*,*,#1240,.F.);
#1240=EDGE_CURVE('',#1241,#1236,#1243,.T.);
#1241=VERTEX_POINT('',#1242);
#1242=CARTESIAN_POINT('',(3.19,1.69,0.));
#1243=CIRCLE('',#1244,9.E-02);
#1244=AXIS2_PLACEMENT_3D('',#1245,#1011,#1012);
#1245=CARTESIAN_POINT('',(3.19,1.6,0.));
#1246=ORIENTED_EDGE('',*,*,#1247,.F.);
#1247=EDGE_CURVE('',#1248,#1241,#1250,.T.);
#1248=VERTEX_POINT('',#1249);
#1249=CARTESIAN_POINT('',(3.5,1.69,0.));
#1250=LINE('',#1249,#1018);
#1251=ORIENTED_EDGE('',*,*,#1252,.T.);
#1252=EDGE_CURVE('',#1248,#1253,#996,.T.);
#1253=VERTEX_POINT('',#1254);
#1254=CARTESIAN_POINT('',(3.5,1.91,0.));
#1255=ORIENTED_EDGE('',*,*,#1256,.F.);
#1256=EDGE_CURVE('',#1257,#1253,#1259,.T.);
#1257=VERTEX_POINT('',#1258);
#1258=CARTESIAN_POINT('',(3.19,1.91,0.));
#1259=LINE('',#1258,#1002);
#1260=ORIENTED_EDGE('',*,*,#1261,.F.);
#1261=EDGE_CURVE('',#1262,#1257,#1264,.T.);
#1262=VERTEX_POINT('',#1263);
#1263=CARTESIAN_POINT('',(3.19,2.09,0.));
#1264=CIRCLE('',#1265,9.E-02);
#1265=AXIS2_PLACEMENT_3D('',#1266,#1011,#1012);
#1266=CARTESIAN_POINT('',(3.19,2.,0.));
#1267=ORIENTED_EDGE('',*,*,#1268,.F.);
#1268=EDGE_CURVE('',#1269,#1262,#1271,.T.);
#1269=VERTEX_POINT('',#1270);
#1270=CARTESIAN_POINT('',(3.5,2.09,0.));
#1271=LINE('',#1270,#1018);
#1272=ORIENTED_EDGE('',*,*,#1273,.T.);
#1273=EDGE_CURVE('',#1269,#1274,#996,.T.);
#1274=VERTEX_POINT('',#1275);
#1275=CARTESIAN_POINT('',(3.5,2.31,0.));
#1276=ORIENTED_EDGE('',*,*,#1277,.F.);
#1277=EDGE_CURVE('',#1278,#1274,#1280,.T.);
#1278=VERTEX_POINT('',#1279);
#1279=CARTESIAN_POINT('',(3.19,2.31,0.));
#1280=LINE('',#1279,#1002);
#1281=ORIENTED_EDGE('',*,*,#1282,.F.);
#1282=EDGE_CURVE('',#1283,#1278,#1285,.T.);
#1283=VERTEX_POINT('',#1284);
#1284=CARTESIAN_POINT('',(3.19,2.49,0.));
#1285=CIRCLE('',#1286,9.E-02);
#1286=AXIS2_PLACEMENT_3D('',#1287,#1011,#1012);
#1287=CARTESIAN_POINT('',(3.19,2.4,0.));
#1288=ORIENTED_EDGE('',*,*,#1289,.F.);
#1289=EDGE_CURVE('',#1290,#1283,#1292,.T.);
#1290=VERTEX_POINT('',#1291);
#1291=CARTESIAN_POINT('',(3.5,2.49,0.));
#1292=LINE('',#1291,#1018);
#1293=ORIENTED_EDGE('',*,*,#1294,.T.);
#1294=EDGE_CURVE('',#1290,#1295,#996,.T.);
#1295=VERTEX_POINT('',#1296);
#1296=CARTESIAN_POINT('',(3.5,2.71,0.));
#1297=ORIENTED_EDGE('',*,*,#1298,.F.);
#1298=EDGE_CURVE('',#1299,#1295,#1301,.T.);
#1299=VERTEX_POINT('',#1300);
#1300=CARTESIAN_POINT('',(3.19,2.71,0.));
#1301=LINE('',#1300,#1002);
#1302=ORIENTED_EDGE('',*,*,#1303,.F.);
#1303=EDGE_CURVE('',#1304,#1299,#1306,.T.);
#1304=VERTEX_POINT('',#1305);
#1305=CARTESIAN_POINT('',(3.19,2.89,0.));
#1306=CIRCLE('',#1307,9.E-02);
#1307=AXIS2_PLACEMENT_3D('',#1308,#1011,#1012);
#1308=CARTESIAN_POINT('',(3.19,2.8,0.));
#1309=ORIENTED_EDGE('',*,*,#1310,.F.);
#1310=EDGE_CURVE('',#1311,#1304,#1313,.T.);
#1311=VERTEX_POINT('',#1312);
#1312=CARTESIAN_POINT('',(3.5,2.89,0.));
#1313=LINE('',#1312,#1018);
#1314=ORIENTED_EDGE('',*,*,#1315,.T.);
#1315=EDGE_CURVE('',#1311,#372,#996,.T.);
#1316=ORIENTED_EDGE('',*,*,#1317,.F.);
#1317=EDGE_CURVE('',#1318,#377,#1320,.T.);
#1318=VERTEX_POINT('',#1319);
#1319=CARTESIAN_POINT('',(2.89,3.19,0.));
#1320=LINE('',#1319,#1321);
#1321=VECTOR('',#1322,1.);
#1322=DIRECTION('',(-4.476705744456E-17,1.,0.));
#1323=ORIENTED_EDGE('',*,*,#1324,.F.);
#1324=EDGE_CURVE('',#1325,#1318,#1327,.T.);
#1325=VERTEX_POINT('',#1326);
#1326=CARTESIAN_POINT('',(2.71,3.19,0.));
#1327=CIRCLE('',#1328,9.E-02);
#1328=AXIS2_PLACEMENT_3D('',#1329,#13,#1330);
#1329=CARTESIAN_POINT('',(2.8,3.19,0.));
#1330=DIRECTION('',(-1.,1.54197642309E-16,-0.));
#1331=ORIENTED_EDGE('',*,*,#1332,.F.);
#1332=EDGE_CURVE('',#393,#1325,#1333,.T.);
#1333=LINE('',#394,#1334);
#1334=VECTOR('',#1335,1.);
#1335=DIRECTION('',(-4.476705744456E-17,-1.,0.));
#1336=ORIENTED_EDGE('',*,*,#1337,.F.);
#1337=EDGE_CURVE('',#1338,#398,#1340,.T.);
#1338=VERTEX_POINT('',#1339);
#1339=CARTESIAN_POINT('',(2.49,3.19,0.));
#1340=LINE('',#1339,#1321);
#1341=ORIENTED_EDGE('',*,*,#1342,.F.);
#1342=EDGE_CURVE('',#1343,#1338,#1345,.T.);
#1343=VERTEX_POINT('',#1344);
#1344=CARTESIAN_POINT('',(2.31,3.19,0.));
#1345=CIRCLE('',#1346,9.E-02);
#1346=AXIS2_PLACEMENT_3D('',#1347,#13,#1330);
#1347=CARTESIAN_POINT('',(2.4,3.19,0.));
#1348=ORIENTED_EDGE('',*,*,#1349,.F.);
#1349=EDGE_CURVE('',#412,#1343,#1350,.T.);
#1350=LINE('',#413,#1334);
#1351=ORIENTED_EDGE('',*,*,#1352,.F.);
#1352=EDGE_CURVE('',#1353,#417,#1355,.T.);
#1353=VERTEX_POINT('',#1354);
#1354=CARTESIAN_POINT('',(2.09,3.19,0.));
#1355=LINE('',#1354,#1321);
#1356=ORIENTED_EDGE('',*,*,#1357,.F.);
#1357=EDGE_CURVE('',#1358,#1353,#1360,.T.);
#1358=VERTEX_POINT('',#1359);
#1359=CARTESIAN_POINT('',(1.91,3.19,0.));
#1360=CIRCLE('',#1361,9.E-02);
#1361=AXIS2_PLACEMENT_3D('',#1362,#13,#1330);
#1362=CARTESIAN_POINT('',(2.,3.19,0.));
#1363=ORIENTED_EDGE('',*,*,#1364,.F.);
#1364=EDGE_CURVE('',#431,#1358,#1365,.T.);
#1365=LINE('',#432,#1334);
#1366=ORIENTED_EDGE('',*,*,#1367,.F.);
#1367=EDGE_CURVE('',#1368,#436,#1370,.T.);
#1368=VERTEX_POINT('',#1369);
#1369=CARTESIAN_POINT('',(1.69,3.19,0.));
#1370=LINE('',#1369,#1321);
#1371=ORIENTED_EDGE('',*,*,#1372,.F.);
#1372=EDGE_CURVE('',#1373,#1368,#1375,.T.);
#1373=VERTEX_POINT('',#1374);
#1374=CARTESIAN_POINT('',(1.51,3.19,0.));
#1375=CIRCLE('',#1376,9.E-02);
#1376=AXIS2_PLACEMENT_3D('',#1377,#13,#1330);
#1377=CARTESIAN_POINT('',(1.6,3.19,0.));
#1378=ORIENTED_EDGE('',*,*,#1379,.F.);
#1379=EDGE_CURVE('',#450,#1373,#1380,.T.);
#1380=LINE('',#451,#1334);
#1381=ORIENTED_EDGE('',*,*,#1382,.F.);
#1382=EDGE_CURVE('',#1383,#455,#1385,.T.);
#1383=VERTEX_POINT('',#1384);
#1384=CARTESIAN_POINT('',(1.29,3.19,0.));
#1385=LINE('',#1384,#1321);
#1386=ORIENTED_EDGE('',*,*,#1387,.F.);
#1387=EDGE_CURVE('',#1388,#1383,#1390,.T.);
#1388=VERTEX_POINT('',#1389);
#1389=CARTESIAN_POINT('',(1.11,3.19,0.));
#1390=CIRCLE('',#1391,9.E-02);
#1391=AXIS2_PLACEMENT_3D('',#1392,#13,#1330);
#1392=CARTESIAN_POINT('',(1.2,3.19,0.));
#1393=ORIENTED_EDGE('',*,*,#1394,.F.);
#1394=EDGE_CURVE('',#469,#1388,#1395,.T.);
#1395=LINE('',#470,#1334);
#1396=ORIENTED_EDGE('',*,*,#1397,.F.);
#1397=EDGE_CURVE('',#1398,#474,#1400,.T.);
#1398=VERTEX_POINT('',#1399);
#1399=CARTESIAN_POINT('',(0.89,3.19,0.));
#1400=LINE('',#1399,#1321);
#1401=ORIENTED_EDGE('',*,*,#1402,.F.);
#1402=EDGE_CURVE('',#1403,#1398,#1405,.T.);
#1403=VERTEX_POINT('',#1404);
#1404=CARTESIAN_POINT('',(0.71,3.19,0.));
#1405=CIRCLE('',#1406,9.E-02);
#1406=AXIS2_PLACEMENT_3D('',#1407,#13,#1330);
#1407=CARTESIAN_POINT('',(0.8,3.19,0.));
#1408=ORIENTED_EDGE('',*,*,#1409,.F.);
#1409=EDGE_CURVE('',#488,#1403,#1410,.T.);
#1410=LINE('',#489,#1334);
#1411=ORIENTED_EDGE('',*,*,#1412,.F.);
#1412=EDGE_CURVE('',#1413,#493,#1415,.T.);
#1413=VERTEX_POINT('',#1414);
#1414=CARTESIAN_POINT('',(0.49,3.19,0.));
#1415=LINE('',#1414,#1321);
#1416=ORIENTED_EDGE('',*,*,#1417,.F.);
#1417=EDGE_CURVE('',#1418,#1413,#1420,.T.);
#1418=VERTEX_POINT('',#1419);
#1419=CARTESIAN_POINT('',(0.31,3.19,0.));
#1420=CIRCLE('',#1421,9.E-02);
#1421=AXIS2_PLACEMENT_3D('',#1422,#13,#1330);
#1422=CARTESIAN_POINT('',(0.4,3.19,0.));
#1423=ORIENTED_EDGE('',*,*,#1424,.F.);
#1424=EDGE_CURVE('',#507,#1418,#1425,.T.);
#1425=LINE('',#508,#1334);
#1426=ORIENTED_EDGE('',*,*,#1427,.F.);
#1427=EDGE_CURVE('',#1428,#512,#1430,.T.);
#1428=VERTEX_POINT('',#1429);
#1429=CARTESIAN_POINT('',(9.E-02,3.19,0.));
#1430=LINE('',#1429,#1321);
#1431=ORIENTED_EDGE('',*,*,#1432,.F.);
#1432=EDGE_CURVE('',#1433,#1428,#1435,.T.);
#1433=VERTEX_POINT('',#1434);
#1434=CARTESIAN_POINT('',(-9.E-02,3.19,0.));
#1435=CIRCLE('',#1436,9.E-02);
#1436=AXIS2_PLACEMENT_3D('',#1437,#13,#1330);
#1437=CARTESIAN_POINT('',(0.,3.19,0.));
#1438=ORIENTED_EDGE('',*,*,#1439,.F.);
#1439=EDGE_CURVE('',#526,#1433,#1440,.T.);
#1440=LINE('',#527,#1334);
#1441=ORIENTED_EDGE('',*,*,#1442,.F.);
#1442=EDGE_CURVE('',#1443,#531,#1445,.T.);
#1443=VERTEX_POINT('',#1444);
#1444=CARTESIAN_POINT('',(-0.31,3.19,0.));
#1445=LINE('',#1444,#1321);
#1446=ORIENTED_EDGE('',*,*,#1447,.F.);
#1447=EDGE_CURVE('',#1448,#1443,#1450,.T.);
#1448=VERTEX_POINT('',#1449);
#1449=CARTESIAN_POINT('',(-0.49,3.19,0.));
#1450=CIRCLE('',#1451,9.E-02);
#1451=AXIS2_PLACEMENT_3D('',#1452,#13,#1330);
#1452=CARTESIAN_POINT('',(-0.4,3.19,0.));
#1453=ORIENTED_EDGE('',*,*,#1454,.F.);
#1454=EDGE_CURVE('',#545,#1448,#1455,.T.);
#1455=LINE('',#546,#1334);
#1456=ORIENTED_EDGE('',*,*,#1457,.F.);
#1457=EDGE_CURVE('',#1458,#550,#1460,.T.);
#1458=VERTEX_POINT('',#1459);
#1459=CARTESIAN_POINT('',(-0.71,3.19,0.));
#1460=LINE('',#1459,#1321);
#1461=ORIENTED_EDGE('',*,*,#1462,.F.);
#1462=EDGE_CURVE('',#1463,#1458,#1465,.T.);
#1463=VERTEX_POINT('',#1464);
#1464=CARTESIAN_POINT('',(-0.89,3.19,0.));
#1465=CIRCLE('',#1466,9.E-02);
#1466=AXIS2_PLACEMENT_3D('',#1467,#13,#1330);
#1467=CARTESIAN_POINT('',(-0.8,3.19,0.));
#1468=ORIENTED_EDGE('',*,*,#1469,.F.);
#1469=EDGE_CURVE('',#564,#1463,#1470,.T.);
#1470=LINE('',#565,#1334);
#1471=ORIENTED_EDGE('',*,*,#1472,.F.);
#1472=EDGE_CURVE('',#1473,#569,#1475,.T.);
#1473=VERTEX_POINT('',#1474);
#1474=CARTESIAN_POINT('',(-1.11,3.19,0.));
#1475=LINE('',#1474,#1321);
#1476=ORIENTED_EDGE('',*,*,#1477,.F.);
#1477=EDGE_CURVE('',#1478,#1473,#1480,.T.);
#1478=VERTEX_POINT('',#1479);
#1479=CARTESIAN_POINT('',(-1.29,3.19,0.));
#1480=CIRCLE('',#1481,9.E-02);
#1481=AXIS2_PLACEMENT_3D('',#1482,#13,#1330);
#1482=CARTESIAN_POINT('',(-1.2,3.19,0.));
#1483=ORIENTED_EDGE('',*,*,#1484,.F.);
#1484=EDGE_CURVE('',#583,#1478,#1485,.T.);
#1485=LINE('',#584,#1334);
#1486=ORIENTED_EDGE('',*,*,#1487,.F.);
#1487=EDGE_CURVE('',#1488,#588,#1490,.T.);
#1488=VERTEX_POINT('',#1489);
#1489=CARTESIAN_POINT('',(-1.51,3.19,0.));
#1490=LINE('',#1489,#1321);
#1491=ORIENTED_EDGE('',*,*,#1492,.F.);
#1492=EDGE_CURVE('',#1493,#1488,#1495,.T.);
#1493=VERTEX_POINT('',#1494);
#1494=CARTESIAN_POINT('',(-1.69,3.19,0.));
#1495=CIRCLE('',#1496,9.E-02);
#1496=AXIS2_PLACEMENT_3D('',#1497,#13,#1330);
#1497=CARTESIAN_POINT('',(-1.6,3.19,0.));
#1498=ORIENTED_EDGE('',*,*,#1499,.F.);
#1499=EDGE_CURVE('',#602,#1493,#1500,.T.);
#1500=LINE('',#603,#1334);
#1501=ORIENTED_EDGE('',*,*,#1502,.F.);
#1502=EDGE_CURVE('',#1503,#607,#1505,.T.);
#1503=VERTEX_POINT('',#1504);
#1504=CARTESIAN_POINT('',(-1.91,3.19,0.));
#1505=LINE('',#1504,#1321);
#1506=ORIENTED_EDGE('',*,*,#1507,.F.);
#1507=EDGE_CURVE('',#1508,#1503,#1510,.T.);
#1508=VERTEX_POINT('',#1509);
#1509=CARTESIAN_POINT('',(-2.09,3.19,0.));
#1510=CIRCLE('',#1511,9.E-02);
#1511=AXIS2_PLACEMENT_3D('',#1512,#13,#1330);
#1512=CARTESIAN_POINT('',(-2.,3.19,0.));
#1513=ORIENTED_EDGE('',*,*,#1514,.F.);
#1514=EDGE_CURVE('',#621,#1508,#1515,.T.);
#1515=LINE('',#622,#1334);
#1516=ORIENTED_EDGE('',*,*,#1517,.F.);
#1517=EDGE_CURVE('',#1518,#626,#1520,.T.);
#1518=VERTEX_POINT('',#1519);
#1519=CARTESIAN_POINT('',(-2.31,3.19,0.));
#1520=LINE('',#1519,#1321);
#1521=ORIENTED_EDGE('',*,*,#1522,.F.);
#1522=EDGE_CURVE('',#1523,#1518,#1525,.T.);
#1523=VERTEX_POINT('',#1524);
#1524=CARTESIAN_POINT('',(-2.49,3.19,0.));
#1525=CIRCLE('',#1526,9.E-02);
#1526=AXIS2_PLACEMENT_3D('',#1527,#13,#1330);
#1527=CARTESIAN_POINT('',(-2.4,3.19,0.));
#1528=ORIENTED_EDGE('',*,*,#1529,.F.);
#1529=EDGE_CURVE('',#640,#1523,#1530,.T.);
#1530=LINE('',#641,#1334);
#1531=ORIENTED_EDGE('',*,*,#1532,.F.);
#1532=EDGE_CURVE('',#1533,#645,#1535,.T.);
#1533=VERTEX_POINT('',#1534);
#1534=CARTESIAN_POINT('',(-2.71,3.19,0.));
#1535=LINE('',#1534,#1321);
#1536=ORIENTED_EDGE('',*,*,#1537,.F.);
#1537=EDGE_CURVE('',#1538,#1533,#1540,.T.);
#1538=VERTEX_POINT('',#1539);
#1539=CARTESIAN_POINT('',(-2.89,3.19,0.));
#1540=CIRCLE('',#1541,9.E-02);
#1541=AXIS2_PLACEMENT_3D('',#1542,#13,#1330);
#1542=CARTESIAN_POINT('',(-2.8,3.19,0.));
#1543=ORIENTED_EDGE('',*,*,#1544,.F.);
#1544=EDGE_CURVE('',#366,#1538,#1545,.T.);
#1545=LINE('',#367,#1334);
#1546=ORIENTED_EDGE('',*,*,#324,.F.);
#1547=ORIENTED_EDGE('',*,*,#1548,.F.);
#1548=EDGE_CURVE('',#1549,#320,#1551,.T.);
#1549=VERTEX_POINT('',#1550);
#1550=CARTESIAN_POINT('',(-3.19,2.89,0.));
#1551=LINE('',#1550,#1552);
#1552=VECTOR('',#1553,1.);
#1553=DIRECTION('',(-1.,6.625524501795E-17,0.));
#1554=ORIENTED_EDGE('',*,*,#1555,.F.);
#1555=EDGE_CURVE('',#1556,#1549,#1558,.T.);
#1556=VERTEX_POINT('',#1557);
#1557=CARTESIAN_POINT('',(-3.19,2.71,0.));
#1558=CIRCLE('',#1559,9.E-02);
#1559=AXIS2_PLACEMENT_3D('',#1560,#13,#1561);
#1560=CARTESIAN_POINT('',(-3.19,2.8,0.));
#1561=DIRECTION('',(-2.652199447716E-16,-1.,0.));
#1562=ORIENTED_EDGE('',*,*,#1563,.F.);
#1563=EDGE_CURVE('',#306,#1556,#1564,.T.);
#1564=LINE('',#307,#1565);
#1565=VECTOR('',#1566,1.);
#1566=DIRECTION('',(1.,-1.557893599071E-16,0.));
#1567=ORIENTED_EDGE('',*,*,#305,.F.);
#1568=ORIENTED_EDGE('',*,*,#1569,.F.);
#1569=EDGE_CURVE('',#1570,#301,#1572,.T.);
#1570=VERTEX_POINT('',#1571);
#1571=CARTESIAN_POINT('',(-3.19,2.49,0.));
#1572=LINE('',#1571,#1552);
#1573=ORIENTED_EDGE('',*,*,#1574,.F.);
#1574=EDGE_CURVE('',#1575,#1570,#1577,.T.);
#1575=VERTEX_POINT('',#1576);
#1576=CARTESIAN_POINT('',(-3.19,2.31,0.));
#1577=CIRCLE('',#1578,9.E-02);
#1578=AXIS2_PLACEMENT_3D('',#1579,#13,#1561);
#1579=CARTESIAN_POINT('',(-3.19,2.4,0.));
#1580=ORIENTED_EDGE('',*,*,#1581,.F.);
#1581=EDGE_CURVE('',#287,#1575,#1582,.T.);
#1582=LINE('',#288,#1565);
#1583=ORIENTED_EDGE('',*,*,#286,.F.);
#1584=ORIENTED_EDGE('',*,*,#1585,.F.);
#1585=EDGE_CURVE('',#1586,#282,#1588,.T.);
#1586=VERTEX_POINT('',#1587);
#1587=CARTESIAN_POINT('',(-3.19,2.09,0.));
#1588=LINE('',#1587,#1552);
#1589=ORIENTED_EDGE('',*,*,#1590,.F.);
#1590=EDGE_CURVE('',#1591,#1586,#1593,.T.);
#1591=VERTEX_POINT('',#1592);
#1592=CARTESIAN_POINT('',(-3.19,1.91,0.));
#1593=CIRCLE('',#1594,9.E-02);
#1594=AXIS2_PLACEMENT_3D('',#1595,#13,#1561);
#1595=CARTESIAN_POINT('',(-3.19,2.,0.));
#1596=ORIENTED_EDGE('',*,*,#1597,.F.);
#1597=EDGE_CURVE('',#268,#1591,#1598,.T.);
#1598=LINE('',#269,#1565);
#1599=ORIENTED_EDGE('',*,*,#267,.F.);
#1600=ORIENTED_EDGE('',*,*,#1601,.F.);
#1601=EDGE_CURVE('',#1602,#263,#1604,.T.);
#1602=VERTEX_POINT('',#1603);
#1603=CARTESIAN_POINT('',(-3.19,1.69,0.));
#1604=LINE('',#1603,#1552);
#1605=ORIENTED_EDGE('',*,*,#1606,.F.);
#1606=EDGE_CURVE('',#1607,#1602,#1609,.T.);
#1607=VERTEX_POINT('',#1608);
#1608=CARTESIAN_POINT('',(-3.19,1.51,0.));
#1609=CIRCLE('',#1610,9.E-02);
#1610=AXIS2_PLACEMENT_3D('',#1611,#13,#1561);
#1611=CARTESIAN_POINT('',(-3.19,1.6,0.));
#1612=ORIENTED_EDGE('',*,*,#1613,.F.);
#1613=EDGE_CURVE('',#249,#1607,#1614,.T.);
#1614=LINE('',#250,#1565);
#1615=ORIENTED_EDGE('',*,*,#248,.F.);
#1616=ORIENTED_EDGE('',*,*,#1617,.F.);
#1617=EDGE_CURVE('',#1618,#244,#1620,.T.);
#1618=VERTEX_POINT('',#1619);
#1619=CARTESIAN_POINT('',(-3.19,1.29,0.));
#1620=LINE('',#1619,#1552);
#1621=ORIENTED_EDGE('',*,*,#1622,.F.);
#1622=EDGE_CURVE('',#1623,#1618,#1625,.T.);
#1623=VERTEX_POINT('',#1624);
#1624=CARTESIAN_POINT('',(-3.19,1.11,0.));
#1625=CIRCLE('',#1626,9.E-02);
#1626=AXIS2_PLACEMENT_3D('',#1627,#13,#1561);
#1627=CARTESIAN_POINT('',(-3.19,1.2,0.));
#1628=ORIENTED_EDGE('',*,*,#1629,.F.);
#1629=EDGE_CURVE('',#230,#1623,#1630,.T.);
#1630=LINE('',#231,#1565);
#1631=ORIENTED_EDGE('',*,*,#229,.F.);
#1632=ORIENTED_EDGE('',*,*,#1633,.F.);
#1633=EDGE_CURVE('',#1634,#225,#1636,.T.);
#1634=VERTEX_POINT('',#1635);
#1635=CARTESIAN_POINT('',(-3.19,0.89,0.));
#1636=LINE('',#1635,#1552);
#1637=ORIENTED_EDGE('',*,*,#1638,.F.);
#1638=EDGE_CURVE('',#1639,#1634,#1641,.T.);
#1639=VERTEX_POINT('',#1640);
#1640=CARTESIAN_POINT('',(-3.19,0.71,0.));
#1641=CIRCLE('',#1642,9.E-02);
#1642=AXIS2_PLACEMENT_3D('',#1643,#13,#1561);
#1643=CARTESIAN_POINT('',(-3.19,0.8,0.));
#1644=ORIENTED_EDGE('',*,*,#1645,.F.);
#1645=EDGE_CURVE('',#211,#1639,#1646,.T.);
#1646=LINE('',#212,#1565);
#1647=ORIENTED_EDGE('',*,*,#210,.F.);
#1648=ORIENTED_EDGE('',*,*,#1649,.F.);
#1649=EDGE_CURVE('',#1650,#206,#1652,.T.);
#1650=VERTEX_POINT('',#1651);
#1651=CARTESIAN_POINT('',(-3.19,0.49,0.));
#1652=LINE('',#1651,#1552);
#1653=ORIENTED_EDGE('',*,*,#1654,.F.);
#1654=EDGE_CURVE('',#1655,#1650,#1657,.T.);
#1655=VERTEX_POINT('',#1656);
#1656=CARTESIAN_POINT('',(-3.19,0.31,0.));
#1657=CIRCLE('',#1658,9.E-02);
#1658=AXIS2_PLACEMENT_3D('',#1659,#13,#1561);
#1659=CARTESIAN_POINT('',(-3.19,0.4,0.));
#1660=ORIENTED_EDGE('',*,*,#1661,.F.);
#1661=EDGE_CURVE('',#192,#1655,#1662,.T.);
#1662=LINE('',#193,#1565);
#1663=ORIENTED_EDGE('',*,*,#191,.F.);
#1664=ORIENTED_EDGE('',*,*,#1665,.F.);
#1665=EDGE_CURVE('',#1666,#187,#1668,.T.);
#1666=VERTEX_POINT('',#1667);
#1667=CARTESIAN_POINT('',(-3.19,9.E-02,0.));
#1668=LINE('',#1667,#1552);
#1669=ORIENTED_EDGE('',*,*,#1670,.F.);
#1670=EDGE_CURVE('',#1671,#1666,#1673,.T.);
#1671=VERTEX_POINT('',#1672);
#1672=CARTESIAN_POINT('',(-3.19,-9.E-02,0.));
#1673=CIRCLE('',#1674,9.E-02);
#1674=AXIS2_PLACEMENT_3D('',#1675,#13,#1561);
#1675=CARTESIAN_POINT('',(-3.19,-1.221245327088E-17,0.));
#1676=ORIENTED_EDGE('',*,*,#1677,.F.);
#1677=EDGE_CURVE('',#173,#1671,#1678,.T.);
#1678=LINE('',#174,#1565);
#1679=ORIENTED_EDGE('',*,*,#172,.F.);
#1680=ORIENTED_EDGE('',*,*,#1681,.F.);
#1681=EDGE_CURVE('',#1682,#168,#1684,.T.);
#1682=VERTEX_POINT('',#1683);
#1683=CARTESIAN_POINT('',(-3.19,-0.31,0.));
#1684=LINE('',#1683,#1552);
#1685=ORIENTED_EDGE('',*,*,#1686,.F.);
#1686=EDGE_CURVE('',#1687,#1682,#1689,.T.);
#1687=VERTEX_POINT('',#1688);
#1688=CARTESIAN_POINT('',(-3.19,-0.49,0.));
#1689=CIRCLE('',#1690,9.E-02);
#1690=AXIS2_PLACEMENT_3D('',#1691,#13,#1561);
#1691=CARTESIAN_POINT('',(-3.19,-0.4,0.));
#1692=ORIENTED_EDGE('',*,*,#1693,.F.);
#1693=EDGE_CURVE('',#154,#1687,#1694,.T.);
#1694=LINE('',#155,#1565);
#1695=ORIENTED_EDGE('',*,*,#153,.F.);
#1696=ORIENTED_EDGE('',*,*,#1697,.F.);
#1697=EDGE_CURVE('',#1698,#149,#1700,.T.);
#1698=VERTEX_POINT('',#1699);
#1699=CARTESIAN_POINT('',(-3.19,-0.71,0.));
#1700=LINE('',#1699,#1552);
#1701=ORIENTED_EDGE('',*,*,#1702,.F.);
#1702=EDGE_CURVE('',#1703,#1698,#1705,.T.);
#1703=VERTEX_POINT('',#1704);
#1704=CARTESIAN_POINT('',(-3.19,-0.89,0.));
#1705=CIRCLE('',#1706,9.E-02);
#1706=AXIS2_PLACEMENT_3D('',#1707,#13,#1561);
#1707=CARTESIAN_POINT('',(-3.19,-0.8,0.));
#1708=ORIENTED_EDGE('',*,*,#1709,.F.);
#1709=EDGE_CURVE('',#135,#1703,#1710,.T.);
#1710=LINE('',#136,#1565);
#1711=ORIENTED_EDGE('',*,*,#134,.F.);
#1712=ORIENTED_EDGE('',*,*,#1713,.F.);
#1713=EDGE_CURVE('',#1714,#130,#1716,.T.);
#1714=VERTEX_POINT('',#1715);
#1715=CARTESIAN_POINT('',(-3.19,-1.11,0.));
#1716=LINE('',#1715,#1552);
#1717=ORIENTED_EDGE('',*,*,#1718,.F.);
#1718=EDGE_CURVE('',#1719,#1714,#1721,.T.);
#1719=VERTEX_POINT('',#1720);
#1720=CARTESIAN_POINT('',(-3.19,-1.29,0.));
#1721=CIRCLE('',#1722,9.E-02);
#1722=AXIS2_PLACEMENT_3D('',#1723,#13,#1561);
#1723=CARTESIAN_POINT('',(-3.19,-1.2,0.));
#1724=ORIENTED_EDGE('',*,*,#1725,.F.);
#1725=EDGE_CURVE('',#116,#1719,#1726,.T.);
#1726=LINE('',#117,#1565);
#1727=ORIENTED_EDGE('',*,*,#115,.F.);
#1728=ORIENTED_EDGE('',*,*,#1729,.F.);
#1729=EDGE_CURVE('',#1730,#111,#1732,.T.);
#1730=VERTEX_POINT('',#1731);
#1731=CARTESIAN_POINT('',(-3.19,-1.51,0.));
#1732=LINE('',#1731,#1552);
#1733=ORIENTED_EDGE('',*,*,#1734,.F.);
#1734=EDGE_CURVE('',#1735,#1730,#1737,.T.);
#1735=VERTEX_POINT('',#1736);
#1736=CARTESIAN_POINT('',(-3.19,-1.69,0.));
#1737=CIRCLE('',#1738,9.E-02);
#1738=AXIS2_PLACEMENT_3D('',#1739,#13,#1561);
#1739=CARTESIAN_POINT('',(-3.19,-1.6,0.));
#1740=ORIENTED_EDGE('',*,*,#1741,.F.);
#1741=EDGE_CURVE('',#97,#1735,#1742,.T.);
#1742=LINE('',#98,#1565);
#1743=ORIENTED_EDGE('',*,*,#96,.F.);
#1744=ORIENTED_EDGE('',*,*,#1745,.F.);
#1745=EDGE_CURVE('',#1746,#92,#1748,.T.);
#1746=VERTEX_POINT('',#1747);
#1747=CARTESIAN_POINT('',(-3.19,-1.91,0.));
#1748=LINE('',#1747,#1552);
#1749=ORIENTED_EDGE('',*,*,#1750,.F.);
#1750=EDGE_CURVE('',#1751,#1746,#1753,.T.);
#1751=VERTEX_POINT('',#1752);
#1752=CARTESIAN_POINT('',(-3.19,-2.09,0.));
#1753=CIRCLE('',#1754,9.E-02);
#1754=AXIS2_PLACEMENT_3D('',#1755,#13,#1561);
#1755=CARTESIAN_POINT('',(-3.19,-2.,0.));
#1756=ORIENTED_EDGE('',*,*,#1757,.F.);
#1757=EDGE_CURVE('',#78,#1751,#1758,.T.);
#1758=LINE('',#79,#1565);
#1759=ORIENTED_EDGE('',*,*,#77,.F.);
#1760=ORIENTED_EDGE('',*,*,#1761,.F.);
#1761=EDGE_CURVE('',#1762,#73,#1764,.T.);
#1762=VERTEX_POINT('',#1763);
#1763=CARTESIAN_POINT('',(-3.19,-2.31,0.));
#1764=LINE('',#1763,#1552);
#1765=ORIENTED_EDGE('',*,*,#1766,.F.);
#1766=EDGE_CURVE('',#1767,#1762,#1769,.T.);
#1767=VERTEX_POINT('',#1768);
#1768=CARTESIAN_POINT('',(-3.19,-2.49,0.));
#1769=CIRCLE('',#1770,9.E-02);
#1770=AXIS2_PLACEMENT_3D('',#1771,#13,#1561);
#1771=CARTESIAN_POINT('',(-3.19,-2.4,0.));
#1772=ORIENTED_EDGE('',*,*,#1773,.F.);
#1773=EDGE_CURVE('',#59,#1767,#1774,.T.);
#1774=LINE('',#60,#1565);
#1775=ORIENTED_EDGE('',*,*,#58,.F.);
#1776=ORIENTED_EDGE('',*,*,#1777,.F.);
#1777=EDGE_CURVE('',#1778,#54,#1780,.T.);
#1778=VERTEX_POINT('',#1779);
#1779=CARTESIAN_POINT('',(-3.19,-2.71,0.));
#1780=LINE('',#1779,#1552);
#1781=ORIENTED_EDGE('',*,*,#1782,.F.);
#1782=EDGE_CURVE('',#1783,#1778,#1785,.T.);
#1783=VERTEX_POINT('',#1784);
#1784=CARTESIAN_POINT('',(-3.19,-2.89,0.));
#1785=CIRCLE('',#1786,9.E-02);
#1786=AXIS2_PLACEMENT_3D('',#1787,#13,#1561);
#1787=CARTESIAN_POINT('',(-3.19,-2.8,0.));
#1788=ORIENTED_EDGE('',*,*,#1789,.F.);
#1789=EDGE_CURVE('',#37,#1783,#1790,.T.);
#1790=LINE('',#38,#1565);
#1791=FACE_BOUND('',#1792,.F.);
#1792=EDGE_LOOP('',(#1793,#1800,#1807,#1812));
#1793=ORIENTED_EDGE('',*,*,#1794,.F.);
#1794=EDGE_CURVE('',#1795,#1797,#1799,.T.);
#1795=VERTEX_POINT('',#1796);
#1796=CARTESIAN_POINT('',(-1.7,-1.7,0.));
#1797=VERTEX_POINT('',#1798);
#1798=CARTESIAN_POINT('',(1.7,-1.7,0.));
#1799=LINE('',#1796,#341);
#1800=ORIENTED_EDGE('',*,*,#1801,.F.);
#1801=EDGE_CURVE('',#1802,#1795,#1804,.T.);
#1802=VERTEX_POINT('',#1803);
#1803=CARTESIAN_POINT('',(-1.7,1.7,0.));
#1804=LINE('',#1803,#1805);
#1805=VECTOR('',#1806,1.);
#1806=DIRECTION('',(0.,-1.,0.));
#1807=ORIENTED_EDGE('',*,*,#1808,.F.);
#1808=EDGE_CURVE('',#1809,#1802,#1811,.T.);
#1809=VERTEX_POINT('',#1810);
#1810=CARTESIAN_POINT('',(1.7,1.7,0.));
#1811=LINE('',#1810,#389);
#1812=ORIENTED_EDGE('',*,*,#1813,.F.);
#1813=EDGE_CURVE('',#1797,#1809,#1814,.T.);
#1814=LINE('',#1798,#27);
#1815=PLANE('',#1816);
#1816=AXIS2_PLACEMENT_3D('',#32,#13,#332);
#1817=ADVANCED_FACE('',(#1818),#1826,.F.);
#1818=FACE_BOUND('',#1819,.F.);
#1819=EDGE_LOOP('',(#1820,#1821,#1822,#1823));
#1820=ORIENTED_EDGE('',*,*,#319,.T.);
#1821=ORIENTED_EDGE('',*,*,#314,.T.);
#1822=ORIENTED_EDGE('',*,*,#309,.F.);
#1823=ORIENTED_EDGE('',*,*,#1824,.F.);
#1824=EDGE_CURVE('',#320,#306,#1825,.T.);
#1825=LINE('',#321,#50);
#1826=PLANE('',#1827);
#1827=AXIS2_PLACEMENT_3D('',#321,#1828,#51);
#1828=DIRECTION('',(1.,-1.110223024625E-16,0.));
#1829=ADVANCED_FACE('',(#1830),#1838,.F.);
#1830=FACE_BOUND('',#1831,.F.);
#1831=EDGE_LOOP('',(#1832,#1833,#1834,#1835));
#1832=ORIENTED_EDGE('',*,*,#300,.T.);
#1833=ORIENTED_EDGE('',*,*,#295,.T.);
#1834=ORIENTED_EDGE('',*,*,#290,.F.);
#1835=ORIENTED_EDGE('',*,*,#1836,.F.);
#1836=EDGE_CURVE('',#301,#287,#1837,.T.);
#1837=LINE('',#302,#50);
#1838=PLANE('',#1839);
#1839=AXIS2_PLACEMENT_3D('',#302,#1828,#51);
#1840=ADVANCED_FACE('',(#1841),#1849,.F.);
#1841=FACE_BOUND('',#1842,.F.);
#1842=EDGE_LOOP('',(#1843,#1844,#1845,#1846));
#1843=ORIENTED_EDGE('',*,*,#281,.T.);
#1844=ORIENTED_EDGE('',*,*,#276,.T.);
#1845=ORIENTED_EDGE('',*,*,#271,.F.);
#1846=ORIENTED_EDGE('',*,*,#1847,.F.);
#1847=EDGE_CURVE('',#282,#268,#1848,.T.);
#1848=LINE('',#283,#50);
#1849=PLANE('',#1850);
#1850=AXIS2_PLACEMENT_3D('',#283,#1828,#51);
#1851=ADVANCED_FACE('',(#1852),#1860,.F.);
#1852=FACE_BOUND('',#1853,.F.);
#1853=EDGE_LOOP('',(#1854,#1855,#1856,#1857));
#1854=ORIENTED_EDGE('',*,*,#262,.T.);
#1855=ORIENTED_EDGE('',*,*,#257,.T.);
#1856=ORIENTED_EDGE('',*,*,#252,.F.);
#1857=ORIENTED_EDGE('',*,*,#1858,.F.);
#1858=EDGE_CURVE('',#263,#249,#1859,.T.);
#1859=LINE('',#264,#50);
#1860=PLANE('',#1861);
#1861=AXIS2_PLACEMENT_3D('',#264,#1828,#51);
#1862=ADVANCED_FACE('',(#1863),#1871,.F.);
#1863=FACE_BOUND('',#1864,.F.);
#1864=EDGE_LOOP('',(#1865,#1866,#1867,#1868));
#1865=ORIENTED_EDGE('',*,*,#243,.T.);
#1866=ORIENTED_EDGE('',*,*,#238,.T.);
#1867=ORIENTED_EDGE('',*,*,#233,.F.);
#1868=ORIENTED_EDGE('',*,*,#1869,.F.);
#1869=EDGE_CURVE('',#244,#230,#1870,.T.);
#1870=LINE('',#245,#50);
#1871=PLANE('',#1872);
#1872=AXIS2_PLACEMENT_3D('',#245,#1828,#51);
#1873=ADVANCED_FACE('',(#1874),#1882,.F.);
#1874=FACE_BOUND('',#1875,.F.);
#1875=EDGE_LOOP('',(#1876,#1877,#1878,#1879));
#1876=ORIENTED_EDGE('',*,*,#224,.T.);
#1877=ORIENTED_EDGE('',*,*,#219,.T.);
#1878=ORIENTED_EDGE('',*,*,#214,.F.);
#1879=ORIENTED_EDGE('',*,*,#1880,.F.);
#1880=EDGE_CURVE('',#225,#211,#1881,.T.);
#1881=LINE('',#226,#50);
#1882=PLANE('',#1883);
#1883=AXIS2_PLACEMENT_3D('',#226,#1828,#51);
#1884=ADVANCED_FACE('',(#1885),#1893,.F.);
#1885=FACE_BOUND('',#1886,.F.);
#1886=EDGE_LOOP('',(#1887,#1888,#1889,#1890));
#1887=ORIENTED_EDGE('',*,*,#205,.T.);
#1888=ORIENTED_EDGE('',*,*,#200,.T.);
#1889=ORIENTED_EDGE('',*,*,#195,.F.);
#1890=ORIENTED_EDGE('',*,*,#1891,.F.);
#1891=EDGE_CURVE('',#206,#192,#1892,.T.);
#1892=LINE('',#207,#50);
#1893=PLANE('',#1894);
#1894=AXIS2_PLACEMENT_3D('',#207,#1828,#51);
#1895=ADVANCED_FACE('',(#1896),#1904,.F.);
#1896=FACE_BOUND('',#1897,.F.);
#1897=EDGE_LOOP('',(#1898,#1899,#1900,#1901));
#1898=ORIENTED_EDGE('',*,*,#186,.T.);
#1899=ORIENTED_EDGE('',*,*,#181,.T.);
#1900=ORIENTED_EDGE('',*,*,#176,.F.);
#1901=ORIENTED_EDGE('',*,*,#1902,.F.);
#1902=EDGE_CURVE('',#187,#173,#1903,.T.);
#1903=LINE('',#188,#50);
#1904=PLANE('',#1905);
#1905=AXIS2_PLACEMENT_3D('',#188,#1828,#51);
#1906=ADVANCED_FACE('',(#1907),#1915,.F.);
#1907=FACE_BOUND('',#1908,.F.);
#1908=EDGE_LOOP('',(#1909,#1910,#1911,#1912));
#1909=ORIENTED_EDGE('',*,*,#167,.T.);
#1910=ORIENTED_EDGE('',*,*,#162,.T.);
#1911=ORIENTED_EDGE('',*,*,#157,.F.);
#1912=ORIENTED_EDGE('',*,*,#1913,.F.);
#1913=EDGE_CURVE('',#168,#154,#1914,.T.);
#1914=LINE('',#169,#50);
#1915=PLANE('',#1916);
#1916=AXIS2_PLACEMENT_3D('',#169,#1828,#51);
#1917=ADVANCED_FACE('',(#1918),#1926,.F.);
#1918=FACE_BOUND('',#1919,.F.);
#1919=EDGE_LOOP('',(#1920,#1921,#1922,#1923));
#1920=ORIENTED_EDGE('',*,*,#148,.T.);
#1921=ORIENTED_EDGE('',*,*,#143,.T.);
#1922=ORIENTED_EDGE('',*,*,#138,.F.);
#1923=ORIENTED_EDGE('',*,*,#1924,.F.);
#1924=EDGE_CURVE('',#149,#135,#1925,.T.);
#1925=LINE('',#150,#50);
#1926=PLANE('',#1927);
#1927=AXIS2_PLACEMENT_3D('',#150,#1828,#51);
#1928=ADVANCED_FACE('',(#1929),#1937,.F.);
#1929=FACE_BOUND('',#1930,.F.);
#1930=EDGE_LOOP('',(#1931,#1932,#1933,#1934));
#1931=ORIENTED_EDGE('',*,*,#129,.T.);
#1932=ORIENTED_EDGE('',*,*,#124,.T.);
#1933=ORIENTED_EDGE('',*,*,#119,.F.);
#1934=ORIENTED_EDGE('',*,*,#1935,.F.);
#1935=EDGE_CURVE('',#130,#116,#1936,.T.);
#1936=LINE('',#131,#50);
#1937=PLANE('',#1938);
#1938=AXIS2_PLACEMENT_3D('',#131,#1828,#51);
#1939=ADVANCED_FACE('',(#1940),#1948,.F.);
#1940=FACE_BOUND('',#1941,.F.);
#1941=EDGE_LOOP('',(#1942,#1943,#1944,#1945));
#1942=ORIENTED_EDGE('',*,*,#110,.T.);
#1943=ORIENTED_EDGE('',*,*,#105,.T.);
#1944=ORIENTED_EDGE('',*,*,#100,.F.);
#1945=ORIENTED_EDGE('',*,*,#1946,.F.);
#1946=EDGE_CURVE('',#111,#97,#1947,.T.);
#1947=LINE('',#112,#50);
#1948=PLANE('',#1949);
#1949=AXIS2_PLACEMENT_3D('',#112,#1828,#51);
#1950=ADVANCED_FACE('',(#1951),#1959,.F.);
#1951=FACE_BOUND('',#1952,.F.);
#1952=EDGE_LOOP('',(#1953,#1954,#1955,#1956));
#1953=ORIENTED_EDGE('',*,*,#91,.T.);
#1954=ORIENTED_EDGE('',*,*,#86,.T.);
#1955=ORIENTED_EDGE('',*,*,#81,.F.);
#1956=ORIENTED_EDGE('',*,*,#1957,.F.);
#1957=EDGE_CURVE('',#92,#78,#1958,.T.);
#1958=LINE('',#93,#50);
#1959=PLANE('',#1960);
#1960=AXIS2_PLACEMENT_3D('',#93,#1828,#51);
#1961=ADVANCED_FACE('',(#1962),#1970,.F.);
#1962=FACE_BOUND('',#1963,.F.);
#1963=EDGE_LOOP('',(#1964,#1965,#1966,#1967));
#1964=ORIENTED_EDGE('',*,*,#72,.T.);
#1965=ORIENTED_EDGE('',*,*,#67,.T.);
#1966=ORIENTED_EDGE('',*,*,#62,.F.);
#1967=ORIENTED_EDGE('',*,*,#1968,.F.);
#1968=EDGE_CURVE('',#73,#59,#1969,.T.);
#1969=LINE('',#74,#50);
#1970=PLANE('',#1971);
#1971=AXIS2_PLACEMENT_3D('',#74,#1828,#51);
#1972=ADVANCED_FACE('',(#1973),#1981,.F.);
#1973=FACE_BOUND('',#1974,.F.);
#1974=EDGE_LOOP('',(#1975,#1976,#1977,#1978));
#1975=ORIENTED_EDGE('',*,*,#53,.T.);
#1976=ORIENTED_EDGE('',*,*,#46,.T.);
#1977=ORIENTED_EDGE('',*,*,#41,.F.);
#1978=ORIENTED_EDGE('',*,*,#1979,.F.);
#1979=EDGE_CURVE('',#54,#37,#1980,.T.);
#1980=LINE('',#55,#50);
#1981=PLANE('',#1982);
#1982=AXIS2_PLACEMENT_3D('',#55,#1828,#51);
#1983=ADVANCED_FACE('',(#1984),#2203,.F.);
#1984=FACE_BOUND('',#1985,.F.);
#1985=EDGE_LOOP('',(#1986,#1987,#336,#1988,#1991,#1992,#1997,#2004,#2007,#2008,#2013,#2018,#2021,#2022,#2027,#2032,#2035,#2036,#2041,#2046,#2049,#2050,#2055,#2060,#2063,#2064,#2069,#2074,#2077,#2078,#2083,#2088,#2091,#2092,#2097,#2102,#2105,#2106,#2111,#2116,#2119,#2120,#2125,#2130,#2133,#2134,#2139,#2144,#2147,#2148,#2153,#2158,#2161,#2162,#2167,#2172,#2175,#2176,#2181,#2186,#2189,#2190,#2195,#2200));
#1986=ORIENTED_EDGE('',*,*,#667,.F.);
#1987=ORIENTED_EDGE('',*,*,#30,.T.);
#1988=ORIENTED_EDGE('',*,*,#1989,.F.);
#1989=EDGE_CURVE('',#990,#338,#1990,.T.);
#1990=LINE('',#991,#34);
#1991=ORIENTED_EDGE('',*,*,#989,.F.);
#1992=ORIENTED_EDGE('',*,*,#1993,.T.);
#1993=EDGE_CURVE('',#985,#1994,#1996,.T.);
#1994=VERTEX_POINT('',#1995);
#1995=CARTESIAN_POINT('',(2.89,-3.5,0.17));
#1996=LINE('',#986,#34);
#1997=ORIENTED_EDGE('',*,*,#1998,.F.);
#1998=EDGE_CURVE('',#1999,#1994,#2001,.T.);
#1999=VERTEX_POINT('',#2000);
#2000=CARTESIAN_POINT('',(2.71,-3.5,0.17));
#2001=LINE('',#2000,#2002);
#2002=VECTOR('',#2003,1.);
#2003=DIRECTION('',(1.,-1.224646799147E-16,0.));
#2004=ORIENTED_EDGE('',*,*,#2005,.F.);
#2005=EDGE_CURVE('',#969,#1999,#2006,.T.);
#2006=LINE('',#970,#34);
#2007=ORIENTED_EDGE('',*,*,#968,.F.);
#2008=ORIENTED_EDGE('',*,*,#2009,.T.);
#2009=EDGE_CURVE('',#964,#2010,#2012,.T.);
#2010=VERTEX_POINT('',#2011);
#2011=CARTESIAN_POINT('',(2.49,-3.5,0.17));
#2012=LINE('',#965,#34);
#2013=ORIENTED_EDGE('',*,*,#2014,.F.);
#2014=EDGE_CURVE('',#2015,#2010,#2017,.T.);
#2015=VERTEX_POINT('',#2016);
#2016=CARTESIAN_POINT('',(2.31,-3.5,0.17));
#2017=LINE('',#2016,#2002);
#2018=ORIENTED_EDGE('',*,*,#2019,.F.);
#2019=EDGE_CURVE('',#948,#2015,#2020,.T.);
#2020=LINE('',#949,#34);
#2021=ORIENTED_EDGE('',*,*,#947,.F.);
#2022=ORIENTED_EDGE('',*,*,#2023,.T.);
#2023=EDGE_CURVE('',#943,#2024,#2026,.T.);
#2024=VERTEX_POINT('',#2025);
#2025=CARTESIAN_POINT('',(2.09,-3.5,0.17));
#2026=LINE('',#944,#34);
#2027=ORIENTED_EDGE('',*,*,#2028,.F.);
#2028=EDGE_CURVE('',#2029,#2024,#2031,.T.);
#2029=VERTEX_POINT('',#2030);
#2030=CARTESIAN_POINT('',(1.91,-3.5,0.17));
#2031=LINE('',#2030,#2002);
#2032=ORIENTED_EDGE('',*,*,#2033,.F.);
#2033=EDGE_CURVE('',#927,#2029,#2034,.T.);
#2034=LINE('',#928,#34);
#2035=ORIENTED_EDGE('',*,*,#926,.F.);
#2036=ORIENTED_EDGE('',*,*,#2037,.T.);
#2037=EDGE_CURVE('',#922,#2038,#2040,.T.);
#2038=VERTEX_POINT('',#2039);
#2039=CARTESIAN_POINT('',(1.69,-3.5,0.17));
#2040=LINE('',#923,#34);
#2041=ORIENTED_EDGE('',*,*,#2042,.F.);
#2042=EDGE_CURVE('',#2043,#2038,#2045,.T.);
#2043=VERTEX_POINT('',#2044);
#2044=CARTESIAN_POINT('',(1.51,-3.5,0.17));
#2045=LINE('',#2044,#2002);
#2046=ORIENTED_EDGE('',*,*,#2047,.F.);
#2047=EDGE_CURVE('',#906,#2043,#2048,.T.);
#2048=LINE('',#907,#34);
#2049=ORIENTED_EDGE('',*,*,#905,.F.);
#2050=ORIENTED_EDGE('',*,*,#2051,.T.);
#2051=EDGE_CURVE('',#901,#2052,#2054,.T.);
#2052=VERTEX_POINT('',#2053);
#2053=CARTESIAN_POINT('',(1.29,-3.5,0.17));
#2054=LINE('',#902,#34);
#2055=ORIENTED_EDGE('',*,*,#2056,.F.);
#2056=EDGE_CURVE('',#2057,#2052,#2059,.T.);
#2057=VERTEX_POINT('',#2058);
#2058=CARTESIAN_POINT('',(1.11,-3.5,0.17));
#2059=LINE('',#2058,#2002);
#2060=ORIENTED_EDGE('',*,*,#2061,.F.);
#2061=EDGE_CURVE('',#885,#2057,#2062,.T.);
#2062=LINE('',#886,#34);
#2063=ORIENTED_EDGE('',*,*,#884,.F.);
#2064=ORIENTED_EDGE('',*,*,#2065,.T.);
#2065=EDGE_CURVE('',#880,#2066,#2068,.T.);
#2066=VERTEX_POINT('',#2067);
#2067=CARTESIAN_POINT('',(0.89,-3.5,0.17));
#2068=LINE('',#881,#34);
#2069=ORIENTED_EDGE('',*,*,#2070,.F.);
#2070=EDGE_CURVE('',#2071,#2066,#2073,.T.);
#2071=VERTEX_POINT('',#2072);
#2072=CARTESIAN_POINT('',(0.71,-3.5,0.17));
#2073=LINE('',#2072,#2002);
#2074=ORIENTED_EDGE('',*,*,#2075,.F.);
#2075=EDGE_CURVE('',#864,#2071,#2076,.T.);
#2076=LINE('',#865,#34);
#2077=ORIENTED_EDGE('',*,*,#863,.F.);
#2078=ORIENTED_EDGE('',*,*,#2079,.T.);
#2079=EDGE_CURVE('',#859,#2080,#2082,.T.);
#2080=VERTEX_POINT('',#2081);
#2081=CARTESIAN_POINT('',(0.49,-3.5,0.17));
#2082=LINE('',#860,#34);
#2083=ORIENTED_EDGE('',*,*,#2084,.F.);
#2084=EDGE_CURVE('',#2085,#2080,#2087,.T.);
#2085=VERTEX_POINT('',#2086);
#2086=CARTESIAN_POINT('',(0.31,-3.5,0.17));
#2087=LINE('',#2086,#2002);
#2088=ORIENTED_EDGE('',*,*,#2089,.F.);
#2089=EDGE_CURVE('',#843,#2085,#2090,.T.);
#2090=LINE('',#844,#34);
#2091=ORIENTED_EDGE('',*,*,#842,.F.);
#2092=ORIENTED_EDGE('',*,*,#2093,.T.);
#2093=EDGE_CURVE('',#838,#2094,#2096,.T.);
#2094=VERTEX_POINT('',#2095);
#2095=CARTESIAN_POINT('',(9.E-02,-3.5,0.17));
#2096=LINE('',#839,#34);
#2097=ORIENTED_EDGE('',*,*,#2098,.F.);
#2098=EDGE_CURVE('',#2099,#2094,#2101,.T.);
#2099=VERTEX_POINT('',#2100);
#2100=CARTESIAN_POINT('',(-9.E-02,-3.5,0.17));
#2101=LINE('',#2100,#2002);
#2102=ORIENTED_EDGE('',*,*,#2103,.F.);
#2103=EDGE_CURVE('',#822,#2099,#2104,.T.);
#2104=LINE('',#823,#34);
#2105=ORIENTED_EDGE('',*,*,#821,.F.);
#2106=ORIENTED_EDGE('',*,*,#2107,.T.);
#2107=EDGE_CURVE('',#817,#2108,#2110,.T.);
#2108=VERTEX_POINT('',#2109);
#2109=CARTESIAN_POINT('',(-0.31,-3.5,0.17));
#2110=LINE('',#818,#34);
#2111=ORIENTED_EDGE('',*,*,#2112,.F.);
#2112=EDGE_CURVE('',#2113,#2108,#2115,.T.);
#2113=VERTEX_POINT('',#2114);
#2114=CARTESIAN_POINT('',(-0.49,-3.5,0.17));
#2115=LINE('',#2114,#2002);
#2116=ORIENTED_EDGE('',*,*,#2117,.F.);
#2117=EDGE_CURVE('',#801,#2113,#2118,.T.);
#2118=LINE('',#802,#34);
#2119=ORIENTED_EDGE('',*,*,#800,.F.);
#2120=ORIENTED_EDGE('',*,*,#2121,.T.);
#2121=EDGE_CURVE('',#796,#2122,#2124,.T.);
#2122=VERTEX_POINT('',#2123);
#2123=CARTESIAN_POINT('',(-0.71,-3.5,0.17));
#2124=LINE('',#797,#34);
#2125=ORIENTED_EDGE('',*,*,#2126,.F.);
#2126=EDGE_CURVE('',#2127,#2122,#2129,.T.);
#2127=VERTEX_POINT('',#2128);
#2128=CARTESIAN_POINT('',(-0.89,-3.5,0.17));
#2129=LINE('',#2128,#2002);
#2130=ORIENTED_EDGE('',*,*,#2131,.F.);
#2131=EDGE_CURVE('',#780,#2127,#2132,.T.);
#2132=LINE('',#781,#34);
#2133=ORIENTED_EDGE('',*,*,#779,.F.);
#2134=ORIENTED_EDGE('',*,*,#2135,.T.);
#2135=EDGE_CURVE('',#775,#2136,#2138,.T.);
#2136=VERTEX_POINT('',#2137);
#2137=CARTESIAN_POINT('',(-1.11,-3.5,0.17));
#2138=LINE('',#776,#34);
#2139=ORIENTED_EDGE('',*,*,#2140,.F.);
#2140=EDGE_CURVE('',#2141,#2136,#2143,.T.);
#2141=VERTEX_POINT('',#2142);
#2142=CARTESIAN_POINT('',(-1.29,-3.5,0.17));
#2143=LINE('',#2142,#2002);
#2144=ORIENTED_EDGE('',*,*,#2145,.F.);
#2145=EDGE_CURVE('',#759,#2141,#2146,.T.);
#2146=LINE('',#760,#34);
#2147=ORIENTED_EDGE('',*,*,#758,.F.);
#2148=ORIENTED_EDGE('',*,*,#2149,.T.);
#2149=EDGE_CURVE('',#754,#2150,#2152,.T.);
#2150=VERTEX_POINT('',#2151);
#2151=CARTESIAN_POINT('',(-1.51,-3.5,0.17));
#2152=LINE('',#755,#34);
#2153=ORIENTED_EDGE('',*,*,#2154,.F.);
#2154=EDGE_CURVE('',#2155,#2150,#2157,.T.);
#2155=VERTEX_POINT('',#2156);
#2156=CARTESIAN_POINT('',(-1.69,-3.5,0.17));
#2157=LINE('',#2156,#2002);
#2158=ORIENTED_EDGE('',*,*,#2159,.F.);
#2159=EDGE_CURVE('',#738,#2155,#2160,.T.);
#2160=LINE('',#739,#34);
#2161=ORIENTED_EDGE('',*,*,#737,.F.);
#2162=ORIENTED_EDGE('',*,*,#2163,.T.);
#2163=EDGE_CURVE('',#733,#2164,#2166,.T.);
#2164=VERTEX_POINT('',#2165);
#2165=CARTESIAN_POINT('',(-1.91,-3.5,0.17));
#2166=LINE('',#734,#34);
#2167=ORIENTED_EDGE('',*,*,#2168,.F.);
#2168=EDGE_CURVE('',#2169,#2164,#2171,.T.);
#2169=VERTEX_POINT('',#2170);
#2170=CARTESIAN_POINT('',(-2.09,-3.5,0.17));
#2171=LINE('',#2170,#2002);
#2172=ORIENTED_EDGE('',*,*,#2173,.F.);
#2173=EDGE_CURVE('',#717,#2169,#2174,.T.);
#2174=LINE('',#718,#34);
#2175=ORIENTED_EDGE('',*,*,#716,.F.);
#2176=ORIENTED_EDGE('',*,*,#2177,.T.);
#2177=EDGE_CURVE('',#712,#2178,#2180,.T.);
#2178=VERTEX_POINT('',#2179);
#2179=CARTESIAN_POINT('',(-2.31,-3.5,0.17));
#2180=LINE('',#713,#34);
#2181=ORIENTED_EDGE('',*,*,#2182,.F.);
#2182=EDGE_CURVE('',#2183,#2178,#2185,.T.);
#2183=VERTEX_POINT('',#2184);
#2184=CARTESIAN_POINT('',(-2.49,-3.5,0.17));
#2185=LINE('',#2184,#2002);
#2186=ORIENTED_EDGE('',*,*,#2187,.F.);
#2187=EDGE_CURVE('',#696,#2183,#2188,.T.);
#2188=LINE('',#697,#34);
#2189=ORIENTED_EDGE('',*,*,#695,.F.);
#2190=ORIENTED_EDGE('',*,*,#2191,.T.);
#2191=EDGE_CURVE('',#689,#2192,#2194,.T.);
#2192=VERTEX_POINT('',#2193);
#2193=CARTESIAN_POINT('',(-2.71,-3.5,0.17));
#2194=LINE('',#690,#34);
#2195=ORIENTED_EDGE('',*,*,#2196,.F.);
#2196=EDGE_CURVE('',#2197,#2192,#2199,.T.);
#2197=VERTEX_POINT('',#2198);
#2198=CARTESIAN_POINT('',(-2.89,-3.5,0.17));
#2199=LINE('',#2198,#2002);
#2200=ORIENTED_EDGE('',*,*,#2201,.F.);
#2201=EDGE_CURVE('',#668,#2197,#2202,.T.);
#2202=LINE('',#669,#34);
#2203=PLANE('',#2204);
#2204=AXIS2_PLACEMENT_3D('',#32,#28,#13);
#2205=ADVANCED_FACE('',(#2206),#2407,.T.);
#2206=FACE_BOUND('',#2207,.T.);
#2207=EDGE_LOOP('',(#2208,#1988,#992,#2209,#2214,#2221,#1020,#2224,#2229,#2234,#1041,#2237,#2242,#2247,#1062,#2250,#2255,#2260,#1083,#2263,#2268,#2273,#1104,#2276,#2281,#2286,#1125,#2289,#2294,#2299,#1146,#2302,#2307,#2312,#1167,#2315,#2320,#2325,#1188,#2328,#2333,#2338,#1209,#2341,#2346,#2351,#1230,#2354,#2359,#2364,#1251,#2367,#2372,#2377,#1272,#2380,#2385,#2390,#1293,#2393,#2398,#2403,#1314,#2406));
#2208=ORIENTED_EDGE('',*,*,#343,.F.);
#2209=ORIENTED_EDGE('',*,*,#2210,.T.);
#2210=EDGE_CURVE('',#994,#2211,#2213,.T.);
#2211=VERTEX_POINT('',#2212);
#2212=CARTESIAN_POINT('',(3.5,-2.89,0.17));
#2213=LINE('',#995,#34);
#2214=ORIENTED_EDGE('',*,*,#2215,.T.);
#2215=EDGE_CURVE('',#2211,#2216,#2218,.T.);
#2216=VERTEX_POINT('',#2217);
#2217=CARTESIAN_POINT('',(3.5,-2.71,0.17));
#2218=LINE('',#2212,#2219);
#2219=VECTOR('',#2220,1.);
#2220=DIRECTION('',(2.22044604925E-16,1.,0.));
#2221=ORIENTED_EDGE('',*,*,#2222,.F.);
#2222=EDGE_CURVE('',#1015,#2216,#2223,.T.);
#2223=LINE('',#1016,#34);
#2224=ORIENTED_EDGE('',*,*,#2225,.T.);
#2225=EDGE_CURVE('',#1022,#2226,#2228,.T.);
#2226=VERTEX_POINT('',#2227);
#2227=CARTESIAN_POINT('',(3.5,-2.49,0.17));
#2228=LINE('',#1023,#34);
#2229=ORIENTED_EDGE('',*,*,#2230,.T.);
#2230=EDGE_CURVE('',#2226,#2231,#2233,.T.);
#2231=VERTEX_POINT('',#2232);
#2232=CARTESIAN_POINT('',(3.5,-2.31,0.17));
#2233=LINE('',#2227,#2219);
#2234=ORIENTED_EDGE('',*,*,#2235,.F.);
#2235=EDGE_CURVE('',#1038,#2231,#2236,.T.);
#2236=LINE('',#1039,#34);
#2237=ORIENTED_EDGE('',*,*,#2238,.T.);
#2238=EDGE_CURVE('',#1043,#2239,#2241,.T.);
#2239=VERTEX_POINT('',#2240);
#2240=CARTESIAN_POINT('',(3.5,-2.09,0.17));
#2241=LINE('',#1044,#34);
#2242=ORIENTED_EDGE('',*,*,#2243,.T.);
#2243=EDGE_CURVE('',#2239,#2244,#2246,.T.);
#2244=VERTEX_POINT('',#2245);
#2245=CARTESIAN_POINT('',(3.5,-1.91,0.17));
#2246=LINE('',#2240,#2219);
#2247=ORIENTED_EDGE('',*,*,#2248,.F.);
#2248=EDGE_CURVE('',#1059,#2244,#2249,.T.);
#2249=LINE('',#1060,#34);
#2250=ORIENTED_EDGE('',*,*,#2251,.T.);
#2251=EDGE_CURVE('',#1064,#2252,#2254,.T.);
#2252=VERTEX_POINT('',#2253);
#2253=CARTESIAN_POINT('',(3.5,-1.69,0.17));
#2254=LINE('',#1065,#34);
#2255=ORIENTED_EDGE('',*,*,#2256,.T.);
#2256=EDGE_CURVE('',#2252,#2257,#2259,.T.);
#2257=VERTEX_POINT('',#2258);
#2258=CARTESIAN_POINT('',(3.5,-1.51,0.17));
#2259=LINE('',#2253,#2219);
#2260=ORIENTED_EDGE('',*,*,#2261,.F.);
#2261=EDGE_CURVE('',#1080,#2257,#2262,.T.);
#2262=LINE('',#1081,#34);
#2263=ORIENTED_EDGE('',*,*,#2264,.T.);
#2264=EDGE_CURVE('',#1085,#2265,#2267,.T.);
#2265=VERTEX_POINT('',#2266);
#2266=CARTESIAN_POINT('',(3.5,-1.29,0.17));
#2267=LINE('',#1086,#34);
#2268=ORIENTED_EDGE('',*,*,#2269,.T.);
#2269=EDGE_CURVE('',#2265,#2270,#2272,.T.);
#2270=VERTEX_POINT('',#2271);
#2271=CARTESIAN_POINT('',(3.5,-1.11,0.17));
#2272=LINE('',#2266,#2219);
#2273=ORIENTED_EDGE('',*,*,#2274,.F.);
#2274=EDGE_CURVE('',#1101,#2270,#2275,.T.);
#2275=LINE('',#1102,#34);
#2276=ORIENTED_EDGE('',*,*,#2277,.T.);
#2277=EDGE_CURVE('',#1106,#2278,#2280,.T.);
#2278=VERTEX_POINT('',#2279);
#2279=CARTESIAN_POINT('',(3.5,-0.89,0.17));
#2280=LINE('',#1107,#34);
#2281=ORIENTED_EDGE('',*,*,#2282,.T.);
#2282=EDGE_CURVE('',#2278,#2283,#2285,.T.);
#2283=VERTEX_POINT('',#2284);
#2284=CARTESIAN_POINT('',(3.5,-0.71,0.17));
#2285=LINE('',#2279,#2219);
#2286=ORIENTED_EDGE('',*,*,#2287,.F.);
#2287=EDGE_CURVE('',#1122,#2283,#2288,.T.);
#2288=LINE('',#1123,#34);
#2289=ORIENTED_EDGE('',*,*,#2290,.T.);
#2290=EDGE_CURVE('',#1127,#2291,#2293,.T.);
#2291=VERTEX_POINT('',#2292);
#2292=CARTESIAN_POINT('',(3.5,-0.49,0.17));
#2293=LINE('',#1128,#34);
#2294=ORIENTED_EDGE('',*,*,#2295,.T.);
#2295=EDGE_CURVE('',#2291,#2296,#2298,.T.);
#2296=VERTEX_POINT('',#2297);
#2297=CARTESIAN_POINT('',(3.5,-0.31,0.17));
#2298=LINE('',#2292,#2219);
#2299=ORIENTED_EDGE('',*,*,#2300,.F.);
#2300=EDGE_CURVE('',#1143,#2296,#2301,.T.);
#2301=LINE('',#1144,#34);
#2302=ORIENTED_EDGE('',*,*,#2303,.T.);
#2303=EDGE_CURVE('',#1148,#2304,#2306,.T.);
#2304=VERTEX_POINT('',#2305);
#2305=CARTESIAN_POINT('',(3.5,-9.E-02,0.17));
#2306=LINE('',#1149,#34);
#2307=ORIENTED_EDGE('',*,*,#2308,.T.);
#2308=EDGE_CURVE('',#2304,#2309,#2311,.T.);
#2309=VERTEX_POINT('',#2310);
#2310=CARTESIAN_POINT('',(3.5,9.E-02,0.17));
#2311=LINE('',#2305,#2219);
#2312=ORIENTED_EDGE('',*,*,#2313,.F.);
#2313=EDGE_CURVE('',#1164,#2309,#2314,.T.);
#2314=LINE('',#1165,#34);
#2315=ORIENTED_EDGE('',*,*,#2316,.T.);
#2316=EDGE_CURVE('',#1169,#2317,#2319,.T.);
#2317=VERTEX_POINT('',#2318);
#2318=CARTESIAN_POINT('',(3.5,0.31,0.17));
#2319=LINE('',#1170,#34);
#2320=ORIENTED_EDGE('',*,*,#2321,.T.);
#2321=EDGE_CURVE('',#2317,#2322,#2324,.T.);
#2322=VERTEX_POINT('',#2323);
#2323=CARTESIAN_POINT('',(3.5,0.49,0.17));
#2324=LINE('',#2318,#2219);
#2325=ORIENTED_EDGE('',*,*,#2326,.F.);
#2326=EDGE_CURVE('',#1185,#2322,#2327,.T.);
#2327=LINE('',#1186,#34);
#2328=ORIENTED_EDGE('',*,*,#2329,.T.);
#2329=EDGE_CURVE('',#1190,#2330,#2332,.T.);
#2330=VERTEX_POINT('',#2331);
#2331=CARTESIAN_POINT('',(3.5,0.71,0.17));
#2332=LINE('',#1191,#34);
#2333=ORIENTED_EDGE('',*,*,#2334,.T.);
#2334=EDGE_CURVE('',#2330,#2335,#2337,.T.);
#2335=VERTEX_POINT('',#2336);
#2336=CARTESIAN_POINT('',(3.5,0.89,0.17));
#2337=LINE('',#2331,#2219);
#2338=ORIENTED_EDGE('',*,*,#2339,.F.);
#2339=EDGE_CURVE('',#1206,#2335,#2340,.T.);
#2340=LINE('',#1207,#34);
#2341=ORIENTED_EDGE('',*,*,#2342,.T.);
#2342=EDGE_CURVE('',#1211,#2343,#2345,.T.);
#2343=VERTEX_POINT('',#2344);
#2344=CARTESIAN_POINT('',(3.5,1.11,0.17));
#2345=LINE('',#1212,#34);
#2346=ORIENTED_EDGE('',*,*,#2347,.T.);
#2347=EDGE_CURVE('',#2343,#2348,#2350,.T.);
#2348=VERTEX_POINT('',#2349);
#2349=CARTESIAN_POINT('',(3.5,1.29,0.17));
#2350=LINE('',#2344,#2219);
#2351=ORIENTED_EDGE('',*,*,#2352,.F.);
#2352=EDGE_CURVE('',#1227,#2348,#2353,.T.);
#2353=LINE('',#1228,#34);
#2354=ORIENTED_EDGE('',*,*,#2355,.T.);
#2355=EDGE_CURVE('',#1232,#2356,#2358,.T.);
#2356=VERTEX_POINT('',#2357);
#2357=CARTESIAN_POINT('',(3.5,1.51,0.17));
#2358=LINE('',#1233,#34);
#2359=ORIENTED_EDGE('',*,*,#2360,.T.);
#2360=EDGE_CURVE('',#2356,#2361,#2363,.T.);
#2361=VERTEX_POINT('',#2362);
#2362=CARTESIAN_POINT('',(3.5,1.69,0.17));
#2363=LINE('',#2357,#2219);
#2364=ORIENTED_EDGE('',*,*,#2365,.F.);
#2365=EDGE_CURVE('',#1248,#2361,#2366,.T.);
#2366=LINE('',#1249,#34);
#2367=ORIENTED_EDGE('',*,*,#2368,.T.);
#2368=EDGE_CURVE('',#1253,#2369,#2371,.T.);
#2369=VERTEX_POINT('',#2370);
#2370=CARTESIAN_POINT('',(3.5,1.91,0.17));
#2371=LINE('',#1254,#34);
#2372=ORIENTED_EDGE('',*,*,#2373,.T.);
#2373=EDGE_CURVE('',#2369,#2374,#2376,.T.);
#2374=VERTEX_POINT('',#2375);
#2375=CARTESIAN_POINT('',(3.5,2.09,0.17));
#2376=LINE('',#2370,#2219);
#2377=ORIENTED_EDGE('',*,*,#2378,.F.);
#2378=EDGE_CURVE('',#1269,#2374,#2379,.T.);
#2379=LINE('',#1270,#34);
#2380=ORIENTED_EDGE('',*,*,#2381,.T.);
#2381=EDGE_CURVE('',#1274,#2382,#2384,.T.);
#2382=VERTEX_POINT('',#2383);
#2383=CARTESIAN_POINT('',(3.5,2.31,0.17));
#2384=LINE('',#1275,#34);
#2385=ORIENTED_EDGE('',*,*,#2386,.T.);
#2386=EDGE_CURVE('',#2382,#2387,#2389,.T.);
#2387=VERTEX_POINT('',#2388);
#2388=CARTESIAN_POINT('',(3.5,2.49,0.17));
#2389=LINE('',#2383,#2219);
#2390=ORIENTED_EDGE('',*,*,#2391,.F.);
#2391=EDGE_CURVE('',#1290,#2387,#2392,.T.);
#2392=LINE('',#1291,#34);
#2393=ORIENTED_EDGE('',*,*,#2394,.T.);
#2394=EDGE_CURVE('',#1295,#2395,#2397,.T.);
#2395=VERTEX_POINT('',#2396);
#2396=CARTESIAN_POINT('',(3.5,2.71,0.17));
#2397=LINE('',#1296,#34);
#2398=ORIENTED_EDGE('',*,*,#2399,.T.);
#2399=EDGE_CURVE('',#2395,#2400,#2402,.T.);
#2400=VERTEX_POINT('',#2401);
#2401=CARTESIAN_POINT('',(3.5,2.89,0.17));
#2402=LINE('',#2396,#2219);
#2403=ORIENTED_EDGE('',*,*,#2404,.F.);
#2404=EDGE_CURVE('',#1311,#2400,#2405,.T.);
#2405=LINE('',#1312,#34);
#2406=ORIENTED_EDGE('',*,*,#371,.T.);
#2407=PLANE('',#2408);
#2408=AXIS2_PLACEMENT_3D('',#991,#332,#13);
#2409=ADVANCED_FACE('',(#2410),#2413,.T.);
#2410=FACE_BOUND('',#2411,.T.);
#2411=EDGE_LOOP('',(#2412));
#2412=ORIENTED_EDGE('',*,*,#353,.T.);
#2413=PLANE('',#2414);
#2414=AXIS2_PLACEMENT_3D('',#358,#13,#14);
#2415=ADVANCED_FACE('',(#2416),#2421,.F.);
#2416=FACE_BOUND('',#2417,.F.);
#2417=EDGE_LOOP('',(#647,#652,#657,#2418));
#2418=ORIENTED_EDGE('',*,*,#2419,.F.);
#2419=EDGE_CURVE('',#645,#366,#2420,.T.);
#2420=LINE('',#646,#389);
#2421=PLANE('',#2422);
#2422=AXIS2_PLACEMENT_3D('',#646,#1806,#390);
#2423=ADVANCED_FACE('',(#2424),#2429,.F.);
#2424=FACE_BOUND('',#2425,.F.);
#2425=EDGE_LOOP('',(#628,#633,#638,#2426));
#2426=ORIENTED_EDGE('',*,*,#2427,.F.);
#2427=EDGE_CURVE('',#626,#640,#2428,.T.);
#2428=LINE('',#627,#389);
#2429=PLANE('',#2430);
#2430=AXIS2_PLACEMENT_3D('',#627,#1806,#390);
#2431=ADVANCED_FACE('',(#2432),#2437,.F.);
#2432=FACE_BOUND('',#2433,.F.);
#2433=EDGE_LOOP('',(#609,#614,#619,#2434));
#2434=ORIENTED_EDGE('',*,*,#2435,.F.);
#2435=EDGE_CURVE('',#607,#621,#2436,.T.);
#2436=LINE('',#608,#389);
#2437=PLANE('',#2438);
#2438=AXIS2_PLACEMENT_3D('',#608,#1806,#390);
#2439=ADVANCED_FACE('',(#2440),#2445,.F.);
#2440=FACE_BOUND('',#2441,.F.);
#2441=EDGE_LOOP('',(#590,#595,#600,#2442));
#2442=ORIENTED_EDGE('',*,*,#2443,.F.);
#2443=EDGE_CURVE('',#588,#602,#2444,.T.);
#2444=LINE('',#589,#389);
#2445=PLANE('',#2446);
#2446=AXIS2_PLACEMENT_3D('',#589,#1806,#390);
#2447=ADVANCED_FACE('',(#2448),#2453,.F.);
#2448=FACE_BOUND('',#2449,.F.);
#2449=EDGE_LOOP('',(#571,#576,#581,#2450));
#2450=ORIENTED_EDGE('',*,*,#2451,.F.);
#2451=EDGE_CURVE('',#569,#583,#2452,.T.);
#2452=LINE('',#570,#389);
#2453=PLANE('',#2454);
#2454=AXIS2_PLACEMENT_3D('',#570,#1806,#390);
#2455=ADVANCED_FACE('',(#2456),#2461,.F.);
#2456=FACE_BOUND('',#2457,.F.);
#2457=EDGE_LOOP('',(#552,#557,#562,#2458));
#2458=ORIENTED_EDGE('',*,*,#2459,.F.);
#2459=EDGE_CURVE('',#550,#564,#2460,.T.);
#2460=LINE('',#551,#389);
#2461=PLANE('',#2462);
#2462=AXIS2_PLACEMENT_3D('',#551,#1806,#390);
#2463=ADVANCED_FACE('',(#2464),#2469,.F.);
#2464=FACE_BOUND('',#2465,.F.);
#2465=EDGE_LOOP('',(#533,#538,#543,#2466));
#2466=ORIENTED_EDGE('',*,*,#2467,.F.);
#2467=EDGE_CURVE('',#531,#545,#2468,.T.);
#2468=LINE('',#532,#389);
#2469=PLANE('',#2470);
#2470=AXIS2_PLACEMENT_3D('',#532,#1806,#390);
#2471=ADVANCED_FACE('',(#2472),#2477,.F.);
#2472=FACE_BOUND('',#2473,.F.);
#2473=EDGE_LOOP('',(#514,#519,#524,#2474));
#2474=ORIENTED_EDGE('',*,*,#2475,.F.);
#2475=EDGE_CURVE('',#512,#526,#2476,.T.);
#2476=LINE('',#513,#389);
#2477=PLANE('',#2478);
#2478=AXIS2_PLACEMENT_3D('',#513,#1806,#390);
#2479=ADVANCED_FACE('',(#2480),#2485,.F.);
#2480=FACE_BOUND('',#2481,.F.);
#2481=EDGE_LOOP('',(#495,#500,#505,#2482));
#2482=ORIENTED_EDGE('',*,*,#2483,.F.);
#2483=EDGE_CURVE('',#493,#507,#2484,.T.);
#2484=LINE('',#494,#389);
#2485=PLANE('',#2486);
#2486=AXIS2_PLACEMENT_3D('',#494,#1806,#390);
#2487=ADVANCED_FACE('',(#2488),#2493,.F.);
#2488=FACE_BOUND('',#2489,.F.);
#2489=EDGE_LOOP('',(#476,#481,#486,#2490));
#2490=ORIENTED_EDGE('',*,*,#2491,.F.);
#2491=EDGE_CURVE('',#474,#488,#2492,.T.);
#2492=LINE('',#475,#389);
#2493=PLANE('',#2494);
#2494=AXIS2_PLACEMENT_3D('',#475,#1806,#390);
#2495=ADVANCED_FACE('',(#2496),#2501,.F.);
#2496=FACE_BOUND('',#2497,.F.);
#2497=EDGE_LOOP('',(#457,#462,#467,#2498));
#2498=ORIENTED_EDGE('',*,*,#2499,.F.);
#2499=EDGE_CURVE('',#455,#469,#2500,.T.);
#2500=LINE('',#456,#389);
#2501=PLANE('',#2502);
#2502=AXIS2_PLACEMENT_3D('',#456,#1806,#390);
#2503=ADVANCED_FACE('',(#2504),#2509,.F.);
#2504=FACE_BOUND('',#2505,.F.);
#2505=EDGE_LOOP('',(#438,#443,#448,#2506));
#2506=ORIENTED_EDGE('',*,*,#2507,.F.);
#2507=EDGE_CURVE('',#436,#450,#2508,.T.);
#2508=LINE('',#437,#389);
#2509=PLANE('',#2510);
#2510=AXIS2_PLACEMENT_3D('',#437,#1806,#390);
#2511=ADVANCED_FACE('',(#2512),#2517,.F.);
#2512=FACE_BOUND('',#2513,.F.);
#2513=EDGE_LOOP('',(#419,#424,#429,#2514));
#2514=ORIENTED_EDGE('',*,*,#2515,.F.);
#2515=EDGE_CURVE('',#417,#431,#2516,.T.);
#2516=LINE('',#418,#389);
#2517=PLANE('',#2518);
#2518=AXIS2_PLACEMENT_3D('',#418,#1806,#390);
#2519=ADVANCED_FACE('',(#2520),#2525,.F.);
#2520=FACE_BOUND('',#2521,.F.);
#2521=EDGE_LOOP('',(#400,#405,#410,#2522));
#2522=ORIENTED_EDGE('',*,*,#2523,.F.);
#2523=EDGE_CURVE('',#398,#412,#2524,.T.);
#2524=LINE('',#399,#389);
#2525=PLANE('',#2526);
#2526=AXIS2_PLACEMENT_3D('',#399,#1806,#390);
#2527=ADVANCED_FACE('',(#2528),#2533,.F.);
#2528=FACE_BOUND('',#2529,.F.);
#2529=EDGE_LOOP('',(#379,#384,#391,#2530));
#2530=ORIENTED_EDGE('',*,*,#2531,.F.);
#2531=EDGE_CURVE('',#377,#393,#2532,.T.);
#2532=LINE('',#378,#389);
#2533=PLANE('',#2534);
#2534=AXIS2_PLACEMENT_3D('',#378,#1806,#390);
#2535=ADVANCED_FACE('',(#2536),#2542,.F.);
#2536=FACE_BOUND('',#2537,.F.);
#2537=EDGE_LOOP('',(#2538,#2539,#2540,#2541));
#2538=ORIENTED_EDGE('',*,*,#1782,.T.);
#2539=ORIENTED_EDGE('',*,*,#1777,.T.);
#2540=ORIENTED_EDGE('',*,*,#1979,.T.);
#2541=ORIENTED_EDGE('',*,*,#1789,.T.);
#2542=PLANE('',#2543);
#2543=AXIS2_PLACEMENT_3D('',#2544,#13,#2545);
#2544=CARTESIAN_POINT('',(-3.318850830335,-2.8,0.));
#2545=DIRECTION('',(1.110223024625E-16,1.,0.));
#2546=ADVANCED_FACE('',(#2547),#2555,.F.);
#2547=FACE_BOUND('',#2548,.F.);
#2548=EDGE_LOOP('',(#2549,#2550,#2551,#2554));
#2549=ORIENTED_EDGE('',*,*,#679,.T.);
#2550=ORIENTED_EDGE('',*,*,#672,.T.);
#2551=ORIENTED_EDGE('',*,*,#2552,.T.);
#2552=EDGE_CURVE('',#668,#689,#2553,.T.);
#2553=LINE('',#669,#2002);
#2554=ORIENTED_EDGE('',*,*,#688,.T.);
#2555=PLANE('',#2556);
#2556=AXIS2_PLACEMENT_3D('',#2557,#13,#2558);
#2557=CARTESIAN_POINT('',(-2.8,-3.318850830335,0.));
#2558=DIRECTION('',(-1.,1.224646799147E-16,0.));
#2559=ADVANCED_FACE('',(#2560),#2566,.F.);
#2560=FACE_BOUND('',#2561,.F.);
#2561=EDGE_LOOP('',(#2562,#2563,#2564,#2565));
#2562=ORIENTED_EDGE('',*,*,#1766,.T.);
#2563=ORIENTED_EDGE('',*,*,#1761,.T.);
#2564=ORIENTED_EDGE('',*,*,#1968,.T.);
#2565=ORIENTED_EDGE('',*,*,#1773,.T.);
#2566=PLANE('',#2567);
#2567=AXIS2_PLACEMENT_3D('',#2568,#13,#2545);
#2568=CARTESIAN_POINT('',(-3.318850830335,-2.4,0.));
#2569=ADVANCED_FACE('',(#2570),#2578,.F.);
#2570=FACE_BOUND('',#2571,.F.);
#2571=EDGE_LOOP('',(#2572,#2573,#2574,#2577));
#2572=ORIENTED_EDGE('',*,*,#704,.T.);
#2573=ORIENTED_EDGE('',*,*,#699,.T.);
#2574=ORIENTED_EDGE('',*,*,#2575,.T.);
#2575=EDGE_CURVE('',#696,#712,#2576,.T.);
#2576=LINE('',#697,#2002);
#2577=ORIENTED_EDGE('',*,*,#711,.T.);
#2578=PLANE('',#2579);
#2579=AXIS2_PLACEMENT_3D('',#2580,#13,#2558);
#2580=CARTESIAN_POINT('',(-2.4,-3.318850830335,0.));
#2581=ADVANCED_FACE('',(#2582),#2588,.F.);
#2582=FACE_BOUND('',#2583,.F.);
#2583=EDGE_LOOP('',(#2584,#2585,#2586,#2587));
#2584=ORIENTED_EDGE('',*,*,#1750,.T.);
#2585=ORIENTED_EDGE('',*,*,#1745,.T.);
#2586=ORIENTED_EDGE('',*,*,#1957,.T.);
#2587=ORIENTED_EDGE('',*,*,#1757,.T.);
#2588=PLANE('',#2589);
#2589=AXIS2_PLACEMENT_3D('',#2590,#13,#2545);
#2590=CARTESIAN_POINT('',(-3.318850830335,-2.,0.));
#2591=ADVANCED_FACE('',(#2592),#2600,.F.);
#2592=FACE_BOUND('',#2593,.F.);
#2593=EDGE_LOOP('',(#2594,#2595,#2596,#2599));
#2594=ORIENTED_EDGE('',*,*,#725,.T.);
#2595=ORIENTED_EDGE('',*,*,#720,.T.);
#2596=ORIENTED_EDGE('',*,*,#2597,.T.);
#2597=EDGE_CURVE('',#717,#733,#2598,.T.);
#2598=LINE('',#718,#2002);
#2599=ORIENTED_EDGE('',*,*,#732,.T.);
#2600=PLANE('',#2601);
#2601=AXIS2_PLACEMENT_3D('',#2602,#13,#2558);
#2602=CARTESIAN_POINT('',(-2.,-3.318850830335,0.));
#2603=ADVANCED_FACE('',(#2604),#2610,.F.);
#2604=FACE_BOUND('',#2605,.F.);
#2605=EDGE_LOOP('',(#2606,#2607,#2608,#2609));
#2606=ORIENTED_EDGE('',*,*,#1734,.T.);
#2607=ORIENTED_EDGE('',*,*,#1729,.T.);
#2608=ORIENTED_EDGE('',*,*,#1946,.T.);
#2609=ORIENTED_EDGE('',*,*,#1741,.T.);
#2610=PLANE('',#2611);
#2611=AXIS2_PLACEMENT_3D('',#2612,#13,#2545);
#2612=CARTESIAN_POINT('',(-3.318850830335,-1.6,0.));
#2613=ADVANCED_FACE('',(#2614),#2622,.F.);
#2614=FACE_BOUND('',#2615,.F.);
#2615=EDGE_LOOP('',(#2616,#2617,#2618,#2621));
#2616=ORIENTED_EDGE('',*,*,#746,.T.);
#2617=ORIENTED_EDGE('',*,*,#741,.T.);
#2618=ORIENTED_EDGE('',*,*,#2619,.T.);
#2619=EDGE_CURVE('',#738,#754,#2620,.T.);
#2620=LINE('',#739,#2002);
#2621=ORIENTED_EDGE('',*,*,#753,.T.);
#2622=PLANE('',#2623);
#2623=AXIS2_PLACEMENT_3D('',#2624,#13,#2558);
#2624=CARTESIAN_POINT('',(-1.6,-3.318850830335,0.));
#2625=ADVANCED_FACE('',(#2626),#2632,.F.);
#2626=FACE_BOUND('',#2627,.F.);
#2627=EDGE_LOOP('',(#2628,#2629,#2630,#2631));
#2628=ORIENTED_EDGE('',*,*,#1718,.T.);
#2629=ORIENTED_EDGE('',*,*,#1713,.T.);
#2630=ORIENTED_EDGE('',*,*,#1935,.T.);
#2631=ORIENTED_EDGE('',*,*,#1725,.T.);
#2632=PLANE('',#2633);
#2633=AXIS2_PLACEMENT_3D('',#2634,#13,#2545);
#2634=CARTESIAN_POINT('',(-3.318850830335,-1.2,0.));
#2635=ADVANCED_FACE('',(#2636),#2644,.F.);
#2636=FACE_BOUND('',#2637,.F.);
#2637=EDGE_LOOP('',(#2638,#2639,#2640,#2643));
#2638=ORIENTED_EDGE('',*,*,#767,.T.);
#2639=ORIENTED_EDGE('',*,*,#762,.T.);
#2640=ORIENTED_EDGE('',*,*,#2641,.T.);
#2641=EDGE_CURVE('',#759,#775,#2642,.T.);
#2642=LINE('',#760,#2002);
#2643=ORIENTED_EDGE('',*,*,#774,.T.);
#2644=PLANE('',#2645);
#2645=AXIS2_PLACEMENT_3D('',#2646,#13,#2558);
#2646=CARTESIAN_POINT('',(-1.2,-3.318850830335,0.));
#2647=ADVANCED_FACE('',(#2648),#2654,.F.);
#2648=FACE_BOUND('',#2649,.F.);
#2649=EDGE_LOOP('',(#2650,#2651,#2652,#2653));
#2650=ORIENTED_EDGE('',*,*,#1702,.T.);
#2651=ORIENTED_EDGE('',*,*,#1697,.T.);
#2652=ORIENTED_EDGE('',*,*,#1924,.T.);
#2653=ORIENTED_EDGE('',*,*,#1709,.T.);
#2654=PLANE('',#2655);
#2655=AXIS2_PLACEMENT_3D('',#2656,#13,#2545);
#2656=CARTESIAN_POINT('',(-3.318850830335,-0.8,0.));
#2657=ADVANCED_FACE('',(#2658),#2666,.F.);
#2658=FACE_BOUND('',#2659,.F.);
#2659=EDGE_LOOP('',(#2660,#2661,#2662,#2665));
#2660=ORIENTED_EDGE('',*,*,#788,.T.);
#2661=ORIENTED_EDGE('',*,*,#783,.T.);
#2662=ORIENTED_EDGE('',*,*,#2663,.T.);
#2663=EDGE_CURVE('',#780,#796,#2664,.T.);
#2664=LINE('',#781,#2002);
#2665=ORIENTED_EDGE('',*,*,#795,.T.);
#2666=PLANE('',#2667);
#2667=AXIS2_PLACEMENT_3D('',#2668,#13,#2558);
#2668=CARTESIAN_POINT('',(-0.8,-3.318850830335,0.));
#2669=ADVANCED_FACE('',(#2670),#2676,.F.);
#2670=FACE_BOUND('',#2671,.F.);
#2671=EDGE_LOOP('',(#2672,#2673,#2674,#2675));
#2672=ORIENTED_EDGE('',*,*,#1686,.T.);
#2673=ORIENTED_EDGE('',*,*,#1681,.T.);
#2674=ORIENTED_EDGE('',*,*,#1913,.T.);
#2675=ORIENTED_EDGE('',*,*,#1693,.T.);
#2676=PLANE('',#2677);
#2677=AXIS2_PLACEMENT_3D('',#2678,#13,#2545);
#2678=CARTESIAN_POINT('',(-3.318850830335,-0.4,0.));
#2679=ADVANCED_FACE('',(#2680),#2688,.F.);
#2680=FACE_BOUND('',#2681,.F.);
#2681=EDGE_LOOP('',(#2682,#2683,#2684,#2687));
#2682=ORIENTED_EDGE('',*,*,#809,.T.);
#2683=ORIENTED_EDGE('',*,*,#804,.T.);
#2684=ORIENTED_EDGE('',*,*,#2685,.T.);
#2685=EDGE_CURVE('',#801,#817,#2686,.T.);
#2686=LINE('',#802,#2002);
#2687=ORIENTED_EDGE('',*,*,#816,.T.);
#2688=PLANE('',#2689);
#2689=AXIS2_PLACEMENT_3D('',#2690,#13,#2558);
#2690=CARTESIAN_POINT('',(-0.4,-3.318850830335,0.));
#2691=ADVANCED_FACE('',(#2692),#2698,.F.);
#2692=FACE_BOUND('',#2693,.F.);
#2693=EDGE_LOOP('',(#2694,#2695,#2696,#2697));
#2694=ORIENTED_EDGE('',*,*,#1670,.T.);
#2695=ORIENTED_EDGE('',*,*,#1665,.T.);
#2696=ORIENTED_EDGE('',*,*,#1902,.T.);
#2697=ORIENTED_EDGE('',*,*,#1677,.T.);
#2698=PLANE('',#2699);
#2699=AXIS2_PLACEMENT_3D('',#2700,#13,#2545);
#2700=CARTESIAN_POINT('',(-3.318850830335,4.716256937108E-19,0.));
#2701=ADVANCED_FACE('',(#2702),#2710,.F.);
#2702=FACE_BOUND('',#2703,.F.);
#2703=EDGE_LOOP('',(#2704,#2705,#2706,#2709));
#2704=ORIENTED_EDGE('',*,*,#830,.T.);
#2705=ORIENTED_EDGE('',*,*,#825,.T.);
#2706=ORIENTED_EDGE('',*,*,#2707,.T.);
#2707=EDGE_CURVE('',#822,#838,#2708,.T.);
#2708=LINE('',#823,#2002);
#2709=ORIENTED_EDGE('',*,*,#837,.T.);
#2710=PLANE('',#2711);
#2711=AXIS2_PLACEMENT_3D('',#2712,#13,#2558);
#2712=CARTESIAN_POINT('',(-6.873240096942E-19,-3.318850830335,0.));
#2713=ADVANCED_FACE('',(#2714),#2720,.F.);
#2714=FACE_BOUND('',#2715,.F.);
#2715=EDGE_LOOP('',(#2716,#2717,#2718,#2719));
#2716=ORIENTED_EDGE('',*,*,#1654,.T.);
#2717=ORIENTED_EDGE('',*,*,#1649,.T.);
#2718=ORIENTED_EDGE('',*,*,#1891,.T.);
#2719=ORIENTED_EDGE('',*,*,#1661,.T.);
#2720=PLANE('',#2721);
#2721=AXIS2_PLACEMENT_3D('',#2722,#13,#2545);
#2722=CARTESIAN_POINT('',(-3.318850830335,0.4,0.));
#2723=ADVANCED_FACE('',(#2724),#2732,.F.);
#2724=FACE_BOUND('',#2725,.F.);
#2725=EDGE_LOOP('',(#2726,#2727,#2728,#2731));
#2726=ORIENTED_EDGE('',*,*,#851,.T.);
#2727=ORIENTED_EDGE('',*,*,#846,.T.);
#2728=ORIENTED_EDGE('',*,*,#2729,.T.);
#2729=EDGE_CURVE('',#843,#859,#2730,.T.);
#2730=LINE('',#844,#2002);
#2731=ORIENTED_EDGE('',*,*,#858,.T.);
#2732=PLANE('',#2733);
#2733=AXIS2_PLACEMENT_3D('',#2734,#13,#2558);
#2734=CARTESIAN_POINT('',(0.4,-3.318850830335,0.));
#2735=ADVANCED_FACE('',(#2736),#2742,.F.);
#2736=FACE_BOUND('',#2737,.F.);
#2737=EDGE_LOOP('',(#2738,#2739,#2740,#2741));
#2738=ORIENTED_EDGE('',*,*,#1638,.T.);
#2739=ORIENTED_EDGE('',*,*,#1633,.T.);
#2740=ORIENTED_EDGE('',*,*,#1880,.T.);
#2741=ORIENTED_EDGE('',*,*,#1645,.T.);
#2742=PLANE('',#2743);
#2743=AXIS2_PLACEMENT_3D('',#2744,#13,#2545);
#2744=CARTESIAN_POINT('',(-3.318850830335,0.8,0.));
#2745=ADVANCED_FACE('',(#2746),#2754,.F.);
#2746=FACE_BOUND('',#2747,.F.);
#2747=EDGE_LOOP('',(#2748,#2749,#2750,#2753));
#2748=ORIENTED_EDGE('',*,*,#872,.T.);
#2749=ORIENTED_EDGE('',*,*,#867,.T.);
#2750=ORIENTED_EDGE('',*,*,#2751,.T.);
#2751=EDGE_CURVE('',#864,#880,#2752,.T.);
#2752=LINE('',#865,#2002);
#2753=ORIENTED_EDGE('',*,*,#879,.T.);
#2754=PLANE('',#2755);
#2755=AXIS2_PLACEMENT_3D('',#2756,#13,#2558);
#2756=CARTESIAN_POINT('',(0.8,-3.318850830335,0.));
#2757=ADVANCED_FACE('',(#2758),#2764,.F.);
#2758=FACE_BOUND('',#2759,.F.);
#2759=EDGE_LOOP('',(#2760,#2761,#2762,#2763));
#2760=ORIENTED_EDGE('',*,*,#1622,.T.);
#2761=ORIENTED_EDGE('',*,*,#1617,.T.);
#2762=ORIENTED_EDGE('',*,*,#1869,.T.);
#2763=ORIENTED_EDGE('',*,*,#1629,.T.);
#2764=PLANE('',#2765);
#2765=AXIS2_PLACEMENT_3D('',#2766,#13,#2545);
#2766=CARTESIAN_POINT('',(-3.318850830335,1.2,0.));
#2767=ADVANCED_FACE('',(#2768),#2776,.F.);
#2768=FACE_BOUND('',#2769,.F.);
#2769=EDGE_LOOP('',(#2770,#2771,#2772,#2775));
#2770=ORIENTED_EDGE('',*,*,#893,.T.);
#2771=ORIENTED_EDGE('',*,*,#888,.T.);
#2772=ORIENTED_EDGE('',*,*,#2773,.T.);
#2773=EDGE_CURVE('',#885,#901,#2774,.T.);
#2774=LINE('',#886,#2002);
#2775=ORIENTED_EDGE('',*,*,#900,.T.);
#2776=PLANE('',#2777);
#2777=AXIS2_PLACEMENT_3D('',#2778,#13,#2558);
#2778=CARTESIAN_POINT('',(1.2,-3.318850830335,0.));
#2779=ADVANCED_FACE('',(#2780),#2786,.F.);
#2780=FACE_BOUND('',#2781,.F.);
#2781=EDGE_LOOP('',(#2782,#2783,#2784,#2785));
#2782=ORIENTED_EDGE('',*,*,#1606,.T.);
#2783=ORIENTED_EDGE('',*,*,#1601,.T.);
#2784=ORIENTED_EDGE('',*,*,#1858,.T.);
#2785=ORIENTED_EDGE('',*,*,#1613,.T.);
#2786=PLANE('',#2787);
#2787=AXIS2_PLACEMENT_3D('',#2788,#13,#2545);
#2788=CARTESIAN_POINT('',(-3.318850830335,1.6,0.));
#2789=ADVANCED_FACE('',(#2790),#2798,.F.);
#2790=FACE_BOUND('',#2791,.F.);
#2791=EDGE_LOOP('',(#2792,#2793,#2794,#2797));
#2792=ORIENTED_EDGE('',*,*,#914,.T.);
#2793=ORIENTED_EDGE('',*,*,#909,.T.);
#2794=ORIENTED_EDGE('',*,*,#2795,.T.);
#2795=EDGE_CURVE('',#906,#922,#2796,.T.);
#2796=LINE('',#907,#2002);
#2797=ORIENTED_EDGE('',*,*,#921,.T.);
#2798=PLANE('',#2799);
#2799=AXIS2_PLACEMENT_3D('',#2800,#13,#2558);
#2800=CARTESIAN_POINT('',(1.6,-3.318850830335,0.));
#2801=ADVANCED_FACE('',(#2802),#2808,.F.);
#2802=FACE_BOUND('',#2803,.F.);
#2803=EDGE_LOOP('',(#2804,#2805,#2806,#2807));
#2804=ORIENTED_EDGE('',*,*,#1590,.T.);
#2805=ORIENTED_EDGE('',*,*,#1585,.T.);
#2806=ORIENTED_EDGE('',*,*,#1847,.T.);
#2807=ORIENTED_EDGE('',*,*,#1597,.T.);
#2808=PLANE('',#2809);
#2809=AXIS2_PLACEMENT_3D('',#2810,#13,#2545);
#2810=CARTESIAN_POINT('',(-3.318850830335,2.,0.));
#2811=ADVANCED_FACE('',(#2812),#2820,.F.);
#2812=FACE_BOUND('',#2813,.F.);
#2813=EDGE_LOOP('',(#2814,#2815,#2816,#2819));
#2814=ORIENTED_EDGE('',*,*,#935,.T.);
#2815=ORIENTED_EDGE('',*,*,#930,.T.);
#2816=ORIENTED_EDGE('',*,*,#2817,.T.);
#2817=EDGE_CURVE('',#927,#943,#2818,.T.);
#2818=LINE('',#928,#2002);
#2819=ORIENTED_EDGE('',*,*,#942,.T.);
#2820=PLANE('',#2821);
#2821=AXIS2_PLACEMENT_3D('',#2822,#13,#2558);
#2822=CARTESIAN_POINT('',(2.,-3.318850830335,0.));
#2823=ADVANCED_FACE('',(#2824),#2830,.F.);
#2824=FACE_BOUND('',#2825,.F.);
#2825=EDGE_LOOP('',(#2826,#2827,#2828,#2829));
#2826=ORIENTED_EDGE('',*,*,#1574,.T.);
#2827=ORIENTED_EDGE('',*,*,#1569,.T.);
#2828=ORIENTED_EDGE('',*,*,#1836,.T.);
#2829=ORIENTED_EDGE('',*,*,#1581,.T.);
#2830=PLANE('',#2831);
#2831=AXIS2_PLACEMENT_3D('',#2832,#13,#2545);
#2832=CARTESIAN_POINT('',(-3.318850830335,2.4,0.));
#2833=ADVANCED_FACE('',(#2834),#2842,.F.);
#2834=FACE_BOUND('',#2835,.F.);
#2835=EDGE_LOOP('',(#2836,#2837,#2838,#2841));
#2836=ORIENTED_EDGE('',*,*,#956,.T.);
#2837=ORIENTED_EDGE('',*,*,#951,.T.);
#2838=ORIENTED_EDGE('',*,*,#2839,.T.);
#2839=EDGE_CURVE('',#948,#964,#2840,.T.);
#2840=LINE('',#949,#2002);
#2841=ORIENTED_EDGE('',*,*,#963,.T.);
#2842=PLANE('',#2843);
#2843=AXIS2_PLACEMENT_3D('',#2844,#13,#2558);
#2844=CARTESIAN_POINT('',(2.4,-3.318850830335,0.));
#2845=ADVANCED_FACE('',(#2846),#2852,.F.);
#2846=FACE_BOUND('',#2847,.F.);
#2847=EDGE_LOOP('',(#2848,#2849,#2850,#2851));
#2848=ORIENTED_EDGE('',*,*,#1555,.T.);
#2849=ORIENTED_EDGE('',*,*,#1548,.T.);
#2850=ORIENTED_EDGE('',*,*,#1824,.T.);
#2851=ORIENTED_EDGE('',*,*,#1563,.T.);
#2852=PLANE('',#2853);
#2853=AXIS2_PLACEMENT_3D('',#2854,#13,#2545);
#2854=CARTESIAN_POINT('',(-3.318850830335,2.8,0.));
#2855=ADVANCED_FACE('',(#2856),#2864,.F.);
#2856=FACE_BOUND('',#2857,.F.);
#2857=EDGE_LOOP('',(#2858,#2859,#2860,#2863));
#2858=ORIENTED_EDGE('',*,*,#977,.T.);
#2859=ORIENTED_EDGE('',*,*,#972,.T.);
#2860=ORIENTED_EDGE('',*,*,#2861,.T.);
#2861=EDGE_CURVE('',#969,#985,#2862,.T.);
#2862=LINE('',#970,#2002);
#2863=ORIENTED_EDGE('',*,*,#984,.T.);
#2864=PLANE('',#2865);
#2865=AXIS2_PLACEMENT_3D('',#2866,#13,#2558);
#2866=CARTESIAN_POINT('',(2.8,-3.318850830335,0.));
#2867=ADVANCED_FACE('',(#2868),#2874,.F.);
#2868=FACE_BOUND('',#2869,.F.);
#2869=EDGE_LOOP('',(#2870,#2871,#2872,#2873));
#2870=ORIENTED_EDGE('',*,*,#1537,.T.);
#2871=ORIENTED_EDGE('',*,*,#1532,.T.);
#2872=ORIENTED_EDGE('',*,*,#2419,.T.);
#2873=ORIENTED_EDGE('',*,*,#1544,.T.);
#2874=PLANE('',#2875);
#2875=AXIS2_PLACEMENT_3D('',#2876,#13,#14);
#2876=CARTESIAN_POINT('',(-2.8,3.318850830335,0.));
#2877=ADVANCED_FACE('',(#2878),#2886,.F.);
#2878=FACE_BOUND('',#2879,.F.);
#2879=EDGE_LOOP('',(#2880,#2881,#2882,#2885));
#2880=ORIENTED_EDGE('',*,*,#1005,.T.);
#2881=ORIENTED_EDGE('',*,*,#998,.T.);
#2882=ORIENTED_EDGE('',*,*,#2883,.T.);
#2883=EDGE_CURVE('',#994,#1015,#2884,.T.);
#2884=LINE('',#995,#2219);
#2885=ORIENTED_EDGE('',*,*,#1014,.T.);
#2886=PLANE('',#2887);
#2887=AXIS2_PLACEMENT_3D('',#2888,#13,#2889);
#2888=CARTESIAN_POINT('',(3.318850830335,-2.8,0.));
#2889=DIRECTION('',(-2.22044604925E-16,-1.,0.));
#2890=ADVANCED_FACE('',(#2891),#2897,.F.);
#2891=FACE_BOUND('',#2892,.F.);
#2892=EDGE_LOOP('',(#2893,#2894,#2895,#2896));
#2893=ORIENTED_EDGE('',*,*,#1522,.T.);
#2894=ORIENTED_EDGE('',*,*,#1517,.T.);
#2895=ORIENTED_EDGE('',*,*,#2427,.T.);
#2896=ORIENTED_EDGE('',*,*,#1529,.T.);
#2897=PLANE('',#2898);
#2898=AXIS2_PLACEMENT_3D('',#2899,#13,#14);
#2899=CARTESIAN_POINT('',(-2.4,3.318850830335,0.));
#2900=ADVANCED_FACE('',(#2901),#2909,.F.);
#2901=FACE_BOUND('',#2902,.F.);
#2902=EDGE_LOOP('',(#2903,#2904,#2905,#2908));
#2903=ORIENTED_EDGE('',*,*,#1030,.T.);
#2904=ORIENTED_EDGE('',*,*,#1025,.T.);
#2905=ORIENTED_EDGE('',*,*,#2906,.T.);
#2906=EDGE_CURVE('',#1022,#1038,#2907,.T.);
#2907=LINE('',#1023,#2219);
#2908=ORIENTED_EDGE('',*,*,#1037,.T.);
#2909=PLANE('',#2910);
#2910=AXIS2_PLACEMENT_3D('',#2911,#13,#2889);
#2911=CARTESIAN_POINT('',(3.318850830335,-2.4,0.));
#2912=ADVANCED_FACE('',(#2913),#2919,.F.);
#2913=FACE_BOUND('',#2914,.F.);
#2914=EDGE_LOOP('',(#2915,#2916,#2917,#2918));
#2915=ORIENTED_EDGE('',*,*,#1507,.T.);
#2916=ORIENTED_EDGE('',*,*,#1502,.T.);
#2917=ORIENTED_EDGE('',*,*,#2435,.T.);
#2918=ORIENTED_EDGE('',*,*,#1514,.T.);
#2919=PLANE('',#2920);
#2920=AXIS2_PLACEMENT_3D('',#2921,#13,#14);
#2921=CARTESIAN_POINT('',(-2.,3.318850830335,0.));
#2922=ADVANCED_FACE('',(#2923),#2931,.F.);
#2923=FACE_BOUND('',#2924,.F.);
#2924=EDGE_LOOP('',(#2925,#2926,#2927,#2930));
#2925=ORIENTED_EDGE('',*,*,#1051,.T.);
#2926=ORIENTED_EDGE('',*,*,#1046,.T.);
#2927=ORIENTED_EDGE('',*,*,#2928,.T.);
#2928=EDGE_CURVE('',#1043,#1059,#2929,.T.);
#2929=LINE('',#1044,#2219);
#2930=ORIENTED_EDGE('',*,*,#1058,.T.);
#2931=PLANE('',#2932);
#2932=AXIS2_PLACEMENT_3D('',#2933,#13,#2889);
#2933=CARTESIAN_POINT('',(3.318850830335,-2.,0.));
#2934=ADVANCED_FACE('',(#2935),#2941,.F.);
#2935=FACE_BOUND('',#2936,.F.);
#2936=EDGE_LOOP('',(#2937,#2938,#2939,#2940));
#2937=ORIENTED_EDGE('',*,*,#1492,.T.);
#2938=ORIENTED_EDGE('',*,*,#1487,.T.);
#2939=ORIENTED_EDGE('',*,*,#2443,.T.);
#2940=ORIENTED_EDGE('',*,*,#1499,.T.);
#2941=PLANE('',#2942);
#2942=AXIS2_PLACEMENT_3D('',#2943,#13,#14);
#2943=CARTESIAN_POINT('',(-1.6,3.318850830335,0.));
#2944=ADVANCED_FACE('',(#2945),#2953,.F.);
#2945=FACE_BOUND('',#2946,.F.);
#2946=EDGE_LOOP('',(#2947,#2948,#2949,#2952));
#2947=ORIENTED_EDGE('',*,*,#1072,.T.);
#2948=ORIENTED_EDGE('',*,*,#1067,.T.);
#2949=ORIENTED_EDGE('',*,*,#2950,.T.);
#2950=EDGE_CURVE('',#1064,#1080,#2951,.T.);
#2951=LINE('',#1065,#2219);
#2952=ORIENTED_EDGE('',*,*,#1079,.T.);
#2953=PLANE('',#2954);
#2954=AXIS2_PLACEMENT_3D('',#2955,#13,#2889);
#2955=CARTESIAN_POINT('',(3.318850830335,-1.6,0.));
#2956=ADVANCED_FACE('',(#2957),#2963,.F.);
#2957=FACE_BOUND('',#2958,.F.);
#2958=EDGE_LOOP('',(#2959,#2960,#2961,#2962));
#2959=ORIENTED_EDGE('',*,*,#1477,.T.);
#2960=ORIENTED_EDGE('',*,*,#1472,.T.);
#2961=ORIENTED_EDGE('',*,*,#2451,.T.);
#2962=ORIENTED_EDGE('',*,*,#1484,.T.);
#2963=PLANE('',#2964);
#2964=AXIS2_PLACEMENT_3D('',#2965,#13,#14);
#2965=CARTESIAN_POINT('',(-1.2,3.318850830335,0.));
#2966=ADVANCED_FACE('',(#2967),#2975,.F.);
#2967=FACE_BOUND('',#2968,.F.);
#2968=EDGE_LOOP('',(#2969,#2970,#2971,#2974));
#2969=ORIENTED_EDGE('',*,*,#1093,.T.);
#2970=ORIENTED_EDGE('',*,*,#1088,.T.);
#2971=ORIENTED_EDGE('',*,*,#2972,.T.);
#2972=EDGE_CURVE('',#1085,#1101,#2973,.T.);
#2973=LINE('',#1086,#2219);
#2974=ORIENTED_EDGE('',*,*,#1100,.T.);
#2975=PLANE('',#2976);
#2976=AXIS2_PLACEMENT_3D('',#2977,#13,#2889);
#2977=CARTESIAN_POINT('',(3.318850830335,-1.2,0.));
#2978=ADVANCED_FACE('',(#2979),#2985,.F.);
#2979=FACE_BOUND('',#2980,.F.);
#2980=EDGE_LOOP('',(#2981,#2982,#2983,#2984));
#2981=ORIENTED_EDGE('',*,*,#1462,.T.);
#2982=ORIENTED_EDGE('',*,*,#1457,.T.);
#2983=ORIENTED_EDGE('',*,*,#2459,.T.);
#2984=ORIENTED_EDGE('',*,*,#1469,.T.);
#2985=PLANE('',#2986);
#2986=AXIS2_PLACEMENT_3D('',#2987,#13,#14);
#2987=CARTESIAN_POINT('',(-0.8,3.318850830335,0.));
#2988=ADVANCED_FACE('',(#2989),#2997,.F.);
#2989=FACE_BOUND('',#2990,.F.);
#2990=EDGE_LOOP('',(#2991,#2992,#2993,#2996));
#2991=ORIENTED_EDGE('',*,*,#1114,.T.);
#2992=ORIENTED_EDGE('',*,*,#1109,.T.);
#2993=ORIENTED_EDGE('',*,*,#2994,.T.);
#2994=EDGE_CURVE('',#1106,#1122,#2995,.T.);
#2995=LINE('',#1107,#2219);
#2996=ORIENTED_EDGE('',*,*,#1121,.T.);
#2997=PLANE('',#2998);
#2998=AXIS2_PLACEMENT_3D('',#2999,#13,#2889);
#2999=CARTESIAN_POINT('',(3.318850830335,-0.8,0.));
#3000=ADVANCED_FACE('',(#3001),#3007,.F.);
#3001=FACE_BOUND('',#3002,.F.);
#3002=EDGE_LOOP('',(#3003,#3004,#3005,#3006));
#3003=ORIENTED_EDGE('',*,*,#1447,.T.);
#3004=ORIENTED_EDGE('',*,*,#1442,.T.);
#3005=ORIENTED_EDGE('',*,*,#2467,.T.);
#3006=ORIENTED_EDGE('',*,*,#1454,.T.);
#3007=PLANE('',#3008);
#3008=AXIS2_PLACEMENT_3D('',#3009,#13,#14);
#3009=CARTESIAN_POINT('',(-0.4,3.318850830335,0.));
#3010=ADVANCED_FACE('',(#3011),#3019,.F.);
#3011=FACE_BOUND('',#3012,.F.);
#3012=EDGE_LOOP('',(#3013,#3014,#3015,#3018));
#3013=ORIENTED_EDGE('',*,*,#1135,.T.);
#3014=ORIENTED_EDGE('',*,*,#1130,.T.);
#3015=ORIENTED_EDGE('',*,*,#3016,.T.);
#3016=EDGE_CURVE('',#1127,#1143,#3017,.T.);
#3017=LINE('',#1128,#2219);
#3018=ORIENTED_EDGE('',*,*,#1142,.T.);
#3019=PLANE('',#3020);
#3020=AXIS2_PLACEMENT_3D('',#3021,#13,#2889);
#3021=CARTESIAN_POINT('',(3.318850830335,-0.4,0.));
#3022=ADVANCED_FACE('',(#3023),#3029,.F.);
#3023=FACE_BOUND('',#3024,.F.);
#3024=EDGE_LOOP('',(#3025,#3026,#3027,#3028));
#3025=ORIENTED_EDGE('',*,*,#1432,.T.);
#3026=ORIENTED_EDGE('',*,*,#1427,.T.);
#3027=ORIENTED_EDGE('',*,*,#2475,.T.);
#3028=ORIENTED_EDGE('',*,*,#1439,.T.);
#3029=PLANE('',#3030);
#3030=AXIS2_PLACEMENT_3D('',#3031,#13,#14);
#3031=CARTESIAN_POINT('',(-1.621236893436E-18,3.318850830335,0.));
#3032=ADVANCED_FACE('',(#3033),#3041,.F.);
#3033=FACE_BOUND('',#3034,.F.);
#3034=EDGE_LOOP('',(#3035,#3036,#3037,#3040));
#3035=ORIENTED_EDGE('',*,*,#1156,.T.);
#3036=ORIENTED_EDGE('',*,*,#1151,.T.);
#3037=ORIENTED_EDGE('',*,*,#3038,.T.);
#3038=EDGE_CURVE('',#1148,#1164,#3039,.T.);
#3039=LINE('',#1149,#2219);
#3040=ORIENTED_EDGE('',*,*,#1163,.T.);
#3041=PLANE('',#3042);
#3042=AXIS2_PLACEMENT_3D('',#3043,#13,#2889);
#3043=CARTESIAN_POINT('',(3.318850830335,-2.564488280858E-18,0.));
#3044=ADVANCED_FACE('',(#3045),#3051,.F.);
#3045=FACE_BOUND('',#3046,.F.);
#3046=EDGE_LOOP('',(#3047,#3048,#3049,#3050));
#3047=ORIENTED_EDGE('',*,*,#1417,.T.);
#3048=ORIENTED_EDGE('',*,*,#1412,.T.);
#3049=ORIENTED_EDGE('',*,*,#2483,.T.);
#3050=ORIENTED_EDGE('',*,*,#1424,.T.);
#3051=PLANE('',#3052);
#3052=AXIS2_PLACEMENT_3D('',#3053,#13,#14);
#3053=CARTESIAN_POINT('',(0.4,3.318850830335,0.));
#3054=ADVANCED_FACE('',(#3055),#3063,.F.);
#3055=FACE_BOUND('',#3056,.F.);
#3056=EDGE_LOOP('',(#3057,#3058,#3059,#3062));
#3057=ORIENTED_EDGE('',*,*,#1177,.T.);
#3058=ORIENTED_EDGE('',*,*,#1172,.T.);
#3059=ORIENTED_EDGE('',*,*,#3060,.T.);
#3060=EDGE_CURVE('',#1169,#1185,#3061,.T.);
#3061=LINE('',#1170,#2219);
#3062=ORIENTED_EDGE('',*,*,#1184,.T.);
#3063=PLANE('',#3064);
#3064=AXIS2_PLACEMENT_3D('',#3065,#13,#2889);
#3065=CARTESIAN_POINT('',(3.318850830335,0.4,0.));
#3066=ADVANCED_FACE('',(#3067),#3073,.F.);
#3067=FACE_BOUND('',#3068,.F.);
#3068=EDGE_LOOP('',(#3069,#3070,#3071,#3072));
#3069=ORIENTED_EDGE('',*,*,#1402,.T.);
#3070=ORIENTED_EDGE('',*,*,#1397,.T.);
#3071=ORIENTED_EDGE('',*,*,#2491,.T.);
#3072=ORIENTED_EDGE('',*,*,#1409,.T.);
#3073=PLANE('',#3074);
#3074=AXIS2_PLACEMENT_3D('',#3075,#13,#14);
#3075=CARTESIAN_POINT('',(0.8,3.318850830335,0.));
#3076=ADVANCED_FACE('',(#3077),#3085,.F.);
#3077=FACE_BOUND('',#3078,.F.);
#3078=EDGE_LOOP('',(#3079,#3080,#3081,#3084));
#3079=ORIENTED_EDGE('',*,*,#1198,.T.);
#3080=ORIENTED_EDGE('',*,*,#1193,.T.);
#3081=ORIENTED_EDGE('',*,*,#3082,.T.);
#3082=EDGE_CURVE('',#1190,#1206,#3083,.T.);
#3083=LINE('',#1191,#2219);
#3084=ORIENTED_EDGE('',*,*,#1205,.T.);
#3085=PLANE('',#3086);
#3086=AXIS2_PLACEMENT_3D('',#3087,#13,#2889);
#3087=CARTESIAN_POINT('',(3.318850830335,0.8,0.));
#3088=ADVANCED_FACE('',(#3089),#3095,.F.);
#3089=FACE_BOUND('',#3090,.F.);
#3090=EDGE_LOOP('',(#3091,#3092,#3093,#3094));
#3091=ORIENTED_EDGE('',*,*,#1387,.T.);
#3092=ORIENTED_EDGE('',*,*,#1382,.T.);
#3093=ORIENTED_EDGE('',*,*,#2499,.T.);
#3094=ORIENTED_EDGE('',*,*,#1394,.T.);
#3095=PLANE('',#3096);
#3096=AXIS2_PLACEMENT_3D('',#3097,#13,#14);
#3097=CARTESIAN_POINT('',(1.2,3.318850830335,0.));
#3098=ADVANCED_FACE('',(#3099),#3107,.F.);
#3099=FACE_BOUND('',#3100,.F.);
#3100=EDGE_LOOP('',(#3101,#3102,#3103,#3106));
#3101=ORIENTED_EDGE('',*,*,#1219,.T.);
#3102=ORIENTED_EDGE('',*,*,#1214,.T.);
#3103=ORIENTED_EDGE('',*,*,#3104,.T.);
#3104=EDGE_CURVE('',#1211,#1227,#3105,.T.);
#3105=LINE('',#1212,#2219);
#3106=ORIENTED_EDGE('',*,*,#1226,.T.);
#3107=PLANE('',#3108);
#3108=AXIS2_PLACEMENT_3D('',#3109,#13,#2889);
#3109=CARTESIAN_POINT('',(3.318850830335,1.2,0.));
#3110=ADVANCED_FACE('',(#3111),#3117,.F.);
#3111=FACE_BOUND('',#3112,.F.);
#3112=EDGE_LOOP('',(#3113,#3114,#3115,#3116));
#3113=ORIENTED_EDGE('',*,*,#1372,.T.);
#3114=ORIENTED_EDGE('',*,*,#1367,.T.);
#3115=ORIENTED_EDGE('',*,*,#2507,.T.);
#3116=ORIENTED_EDGE('',*,*,#1379,.T.);
#3117=PLANE('',#3118);
#3118=AXIS2_PLACEMENT_3D('',#3119,#13,#14);
#3119=CARTESIAN_POINT('',(1.6,3.318850830335,0.));
#3120=ADVANCED_FACE('',(#3121),#3129,.F.);
#3121=FACE_BOUND('',#3122,.F.);
#3122=EDGE_LOOP('',(#3123,#3124,#3125,#3128));
#3123=ORIENTED_EDGE('',*,*,#1240,.T.);
#3124=ORIENTED_EDGE('',*,*,#1235,.T.);
#3125=ORIENTED_EDGE('',*,*,#3126,.T.);
#3126=EDGE_CURVE('',#1232,#1248,#3127,.T.);
#3127=LINE('',#1233,#2219);
#3128=ORIENTED_EDGE('',*,*,#1247,.T.);
#3129=PLANE('',#3130);
#3130=AXIS2_PLACEMENT_3D('',#3131,#13,#2889);
#3131=CARTESIAN_POINT('',(3.318850830335,1.6,0.));
#3132=ADVANCED_FACE('',(#3133),#3139,.F.);
#3133=FACE_BOUND('',#3134,.F.);
#3134=EDGE_LOOP('',(#3135,#3136,#3137,#3138));
#3135=ORIENTED_EDGE('',*,*,#1357,.T.);
#3136=ORIENTED_EDGE('',*,*,#1352,.T.);
#3137=ORIENTED_EDGE('',*,*,#2515,.T.);
#3138=ORIENTED_EDGE('',*,*,#1364,.T.);
#3139=PLANE('',#3140);
#3140=AXIS2_PLACEMENT_3D('',#3141,#13,#14);
#3141=CARTESIAN_POINT('',(2.,3.318850830335,0.));
#3142=ADVANCED_FACE('',(#3143),#3151,.F.);
#3143=FACE_BOUND('',#3144,.F.);
#3144=EDGE_LOOP('',(#3145,#3146,#3147,#3150));
#3145=ORIENTED_EDGE('',*,*,#1261,.T.);
#3146=ORIENTED_EDGE('',*,*,#1256,.T.);
#3147=ORIENTED_EDGE('',*,*,#3148,.T.);
#3148=EDGE_CURVE('',#1253,#1269,#3149,.T.);
#3149=LINE('',#1254,#2219);
#3150=ORIENTED_EDGE('',*,*,#1268,.T.);
#3151=PLANE('',#3152);
#3152=AXIS2_PLACEMENT_3D('',#3153,#13,#2889);
#3153=CARTESIAN_POINT('',(3.318850830335,2.,0.));
#3154=ADVANCED_FACE('',(#3155),#3161,.F.);
#3155=FACE_BOUND('',#3156,.F.);
#3156=EDGE_LOOP('',(#3157,#3158,#3159,#3160));
#3157=ORIENTED_EDGE('',*,*,#1342,.T.);
#3158=ORIENTED_EDGE('',*,*,#1337,.T.);
#3159=ORIENTED_EDGE('',*,*,#2523,.T.);
#3160=ORIENTED_EDGE('',*,*,#1349,.T.);
#3161=PLANE('',#3162);
#3162=AXIS2_PLACEMENT_3D('',#3163,#13,#14);
#3163=CARTESIAN_POINT('',(2.4,3.318850830335,0.));
#3164=ADVANCED_FACE('',(#3165),#3173,.F.);
#3165=FACE_BOUND('',#3166,.F.);
#3166=EDGE_LOOP('',(#3167,#3168,#3169,#3172));
#3167=ORIENTED_EDGE('',*,*,#1282,.T.);
#3168=ORIENTED_EDGE('',*,*,#1277,.T.);
#3169=ORIENTED_EDGE('',*,*,#3170,.T.);
#3170=EDGE_CURVE('',#1274,#1290,#3171,.T.);
#3171=LINE('',#1275,#2219);
#3172=ORIENTED_EDGE('',*,*,#1289,.T.);
#3173=PLANE('',#3174);
#3174=AXIS2_PLACEMENT_3D('',#3175,#13,#2889);
#3175=CARTESIAN_POINT('',(3.318850830335,2.4,0.));
#3176=ADVANCED_FACE('',(#3177),#3183,.F.);
#3177=FACE_BOUND('',#3178,.F.);
#3178=EDGE_LOOP('',(#3179,#3180,#3181,#3182));
#3179=ORIENTED_EDGE('',*,*,#1324,.T.);
#3180=ORIENTED_EDGE('',*,*,#1317,.T.);
#3181=ORIENTED_EDGE('',*,*,#2531,.T.);
#3182=ORIENTED_EDGE('',*,*,#1332,.T.);
#3183=PLANE('',#3184);
#3184=AXIS2_PLACEMENT_3D('',#3185,#13,#14);
#3185=CARTESIAN_POINT('',(2.8,3.318850830335,0.));
#3186=ADVANCED_FACE('',(#3187),#3195,.F.);
#3187=FACE_BOUND('',#3188,.F.);
#3188=EDGE_LOOP('',(#3189,#3190,#3191,#3194));
#3189=ORIENTED_EDGE('',*,*,#1303,.T.);
#3190=ORIENTED_EDGE('',*,*,#1298,.T.);
#3191=ORIENTED_EDGE('',*,*,#3192,.T.);
#3192=EDGE_CURVE('',#1295,#1311,#3193,.T.);
#3193=LINE('',#1296,#2219);
#3194=ORIENTED_EDGE('',*,*,#1310,.T.);
#3195=PLANE('',#3196);
#3196=AXIS2_PLACEMENT_3D('',#3197,#13,#2889);
#3197=CARTESIAN_POINT('',(3.318850830335,2.8,0.));
#3198=ADVANCED_FACE('',(#3199),#3205,.F.);
#3199=FACE_BOUND('',#3200,.F.);
#3200=EDGE_LOOP('',(#3201,#3202,#3203,#3204));
#3201=ORIENTED_EDGE('',*,*,#1794,.T.);
#3202=ORIENTED_EDGE('',*,*,#1813,.T.);
#3203=ORIENTED_EDGE('',*,*,#1808,.T.);
#3204=ORIENTED_EDGE('',*,*,#1801,.T.);
#3205=PLANE('',#3206);
#3206=AXIS2_PLACEMENT_3D('',#3207,#13,#332);
#3207=CARTESIAN_POINT('',(-6.530723674266E-17,6.530723674266E-17,0.));
#3208=ADVANCED_FACE('',(#3209),#3215,.F.);
#3209=FACE_BOUND('',#3210,.F.);
#3210=EDGE_LOOP('',(#3211,#3212,#3213,#3214));
#3211=ORIENTED_EDGE('',*,*,#2201,.T.);
#3212=ORIENTED_EDGE('',*,*,#2196,.T.);
#3213=ORIENTED_EDGE('',*,*,#2191,.F.);
#3214=ORIENTED_EDGE('',*,*,#2552,.F.);
#3215=PLANE('',#3216);
#3216=AXIS2_PLACEMENT_3D('',#669,#3217,#2003);
#3217=DIRECTION('',(1.224646799147E-16,1.,0.));
#3218=ADVANCED_FACE('',(#3219),#3225,.F.);
#3219=FACE_BOUND('',#3220,.F.);
#3220=EDGE_LOOP('',(#3221,#3222,#3223,#3224));
#3221=ORIENTED_EDGE('',*,*,#2187,.T.);
#3222=ORIENTED_EDGE('',*,*,#2182,.T.);
#3223=ORIENTED_EDGE('',*,*,#2177,.F.);
#3224=ORIENTED_EDGE('',*,*,#2575,.F.);
#3225=PLANE('',#3226);
#3226=AXIS2_PLACEMENT_3D('',#697,#3217,#2003);
#3227=ADVANCED_FACE('',(#3228),#3234,.F.);
#3228=FACE_BOUND('',#3229,.F.);
#3229=EDGE_LOOP('',(#3230,#3231,#3232,#3233));
#3230=ORIENTED_EDGE('',*,*,#2173,.T.);
#3231=ORIENTED_EDGE('',*,*,#2168,.T.);
#3232=ORIENTED_EDGE('',*,*,#2163,.F.);
#3233=ORIENTED_EDGE('',*,*,#2597,.F.);
#3234=PLANE('',#3235);
#3235=AXIS2_PLACEMENT_3D('',#718,#3217,#2003);
#3236=ADVANCED_FACE('',(#3237),#3243,.F.);
#3237=FACE_BOUND('',#3238,.F.);
#3238=EDGE_LOOP('',(#3239,#3240,#3241,#3242));
#3239=ORIENTED_EDGE('',*,*,#2159,.T.);
#3240=ORIENTED_EDGE('',*,*,#2154,.T.);
#3241=ORIENTED_EDGE('',*,*,#2149,.F.);
#3242=ORIENTED_EDGE('',*,*,#2619,.F.);
#3243=PLANE('',#3244);
#3244=AXIS2_PLACEMENT_3D('',#739,#3217,#2003);
#3245=ADVANCED_FACE('',(#3246),#3252,.F.);
#3246=FACE_BOUND('',#3247,.F.);
#3247=EDGE_LOOP('',(#3248,#3249,#3250,#3251));
#3248=ORIENTED_EDGE('',*,*,#2145,.T.);
#3249=ORIENTED_EDGE('',*,*,#2140,.T.);
#3250=ORIENTED_EDGE('',*,*,#2135,.F.);
#3251=ORIENTED_EDGE('',*,*,#2641,.F.);
#3252=PLANE('',#3253);
#3253=AXIS2_PLACEMENT_3D('',#760,#3217,#2003);
#3254=ADVANCED_FACE('',(#3255),#3261,.F.);
#3255=FACE_BOUND('',#3256,.F.);
#3256=EDGE_LOOP('',(#3257,#3258,#3259,#3260));
#3257=ORIENTED_EDGE('',*,*,#2131,.T.);
#3258=ORIENTED_EDGE('',*,*,#2126,.T.);
#3259=ORIENTED_EDGE('',*,*,#2121,.F.);
#3260=ORIENTED_EDGE('',*,*,#2663,.F.);
#3261=PLANE('',#3262);
#3262=AXIS2_PLACEMENT_3D('',#781,#3217,#2003);
#3263=ADVANCED_FACE('',(#3264),#3270,.F.);
#3264=FACE_BOUND('',#3265,.F.);
#3265=EDGE_LOOP('',(#3266,#3267,#3268,#3269));
#3266=ORIENTED_EDGE('',*,*,#2117,.T.);
#3267=ORIENTED_EDGE('',*,*,#2112,.T.);
#3268=ORIENTED_EDGE('',*,*,#2107,.F.);
#3269=ORIENTED_EDGE('',*,*,#2685,.F.);
#3270=PLANE('',#3271);
#3271=AXIS2_PLACEMENT_3D('',#802,#3217,#2003);
#3272=ADVANCED_FACE('',(#3273),#3279,.F.);
#3273=FACE_BOUND('',#3274,.F.);
#3274=EDGE_LOOP('',(#3275,#3276,#3277,#3278));
#3275=ORIENTED_EDGE('',*,*,#2103,.T.);
#3276=ORIENTED_EDGE('',*,*,#2098,.T.);
#3277=ORIENTED_EDGE('',*,*,#2093,.F.);
#3278=ORIENTED_EDGE('',*,*,#2707,.F.);
#3279=PLANE('',#3280);
#3280=AXIS2_PLACEMENT_3D('',#823,#3217,#2003);
#3281=ADVANCED_FACE('',(#3282),#3288,.F.);
#3282=FACE_BOUND('',#3283,.F.);
#3283=EDGE_LOOP('',(#3284,#3285,#3286,#3287));
#3284=ORIENTED_EDGE('',*,*,#2089,.T.);
#3285=ORIENTED_EDGE('',*,*,#2084,.T.);
#3286=ORIENTED_EDGE('',*,*,#2079,.F.);
#3287=ORIENTED_EDGE('',*,*,#2729,.F.);
#3288=PLANE('',#3289);
#3289=AXIS2_PLACEMENT_3D('',#844,#3217,#2003);
#3290=ADVANCED_FACE('',(#3291),#3297,.F.);
#3291=FACE_BOUND('',#3292,.F.);
#3292=EDGE_LOOP('',(#3293,#3294,#3295,#3296));
#3293=ORIENTED_EDGE('',*,*,#2075,.T.);
#3294=ORIENTED_EDGE('',*,*,#2070,.T.);
#3295=ORIENTED_EDGE('',*,*,#2065,.F.);
#3296=ORIENTED_EDGE('',*,*,#2751,.F.);
#3297=PLANE('',#3298);
#3298=AXIS2_PLACEMENT_3D('',#865,#3217,#2003);
#3299=ADVANCED_FACE('',(#3300),#3306,.F.);
#3300=FACE_BOUND('',#3301,.F.);
#3301=EDGE_LOOP('',(#3302,#3303,#3304,#3305));
#3302=ORIENTED_EDGE('',*,*,#2061,.T.);
#3303=ORIENTED_EDGE('',*,*,#2056,.T.);
#3304=ORIENTED_EDGE('',*,*,#2051,.F.);
#3305=ORIENTED_EDGE('',*,*,#2773,.F.);
#3306=PLANE('',#3307);
#3307=AXIS2_PLACEMENT_3D('',#886,#3217,#2003);
#3308=ADVANCED_FACE('',(#3309),#3315,.F.);
#3309=FACE_BOUND('',#3310,.F.);
#3310=EDGE_LOOP('',(#3311,#3312,#3313,#3314));
#3311=ORIENTED_EDGE('',*,*,#2047,.T.);
#3312=ORIENTED_EDGE('',*,*,#2042,.T.);
#3313=ORIENTED_EDGE('',*,*,#2037,.F.);
#3314=ORIENTED_EDGE('',*,*,#2795,.F.);
#3315=PLANE('',#3316);
#3316=AXIS2_PLACEMENT_3D('',#907,#3217,#2003);
#3317=ADVANCED_FACE('',(#3318),#3324,.F.);
#3318=FACE_BOUND('',#3319,.F.);
#3319=EDGE_LOOP('',(#3320,#3321,#3322,#3323));
#3320=ORIENTED_EDGE('',*,*,#2033,.T.);
#3321=ORIENTED_EDGE('',*,*,#2028,.T.);
#3322=ORIENTED_EDGE('',*,*,#2023,.F.);
#3323=ORIENTED_EDGE('',*,*,#2817,.F.);
#3324=PLANE('',#3325);
#3325=AXIS2_PLACEMENT_3D('',#928,#3217,#2003);
#3326=ADVANCED_FACE('',(#3327),#3333,.F.);
#3327=FACE_BOUND('',#3328,.F.);
#3328=EDGE_LOOP('',(#3329,#3330,#3331,#3332));
#3329=ORIENTED_EDGE('',*,*,#2019,.T.);
#3330=ORIENTED_EDGE('',*,*,#2014,.T.);
#3331=ORIENTED_EDGE('',*,*,#2009,.F.);
#3332=ORIENTED_EDGE('',*,*,#2839,.F.);
#3333=PLANE('',#3334);
#3334=AXIS2_PLACEMENT_3D('',#949,#3217,#2003);
#3335=ADVANCED_FACE('',(#3336),#3342,.F.);
#3336=FACE_BOUND('',#3337,.F.);
#3337=EDGE_LOOP('',(#3338,#3339,#3340,#3341));
#3338=ORIENTED_EDGE('',*,*,#2005,.T.);
#3339=ORIENTED_EDGE('',*,*,#1998,.T.);
#3340=ORIENTED_EDGE('',*,*,#1993,.F.);
#3341=ORIENTED_EDGE('',*,*,#2861,.F.);
#3342=PLANE('',#3343);
#3343=AXIS2_PLACEMENT_3D('',#970,#3217,#2003);
#3344=ADVANCED_FACE('',(#3345),#3348,.F.);
#3345=FACE_BOUND('',#3346,.F.);
#3346=EDGE_LOOP('',(#2393,#2398,#2403,#3347));
#3347=ORIENTED_EDGE('',*,*,#3192,.F.);
#3348=PLANE('',#3349);
#3349=AXIS2_PLACEMENT_3D('',#1296,#3350,#2220);
#3350=DIRECTION('',(-1.,2.22044604925E-16,0.));
#3351=ADVANCED_FACE('',(#3352),#3355,.F.);
#3352=FACE_BOUND('',#3353,.F.);
#3353=EDGE_LOOP('',(#2380,#2385,#2390,#3354));
#3354=ORIENTED_EDGE('',*,*,#3170,.F.);
#3355=PLANE('',#3356);
#3356=AXIS2_PLACEMENT_3D('',#1275,#3350,#2220);
#3357=ADVANCED_FACE('',(#3358),#3361,.F.);
#3358=FACE_BOUND('',#3359,.F.);
#3359=EDGE_LOOP('',(#2367,#2372,#2377,#3360));
#3360=ORIENTED_EDGE('',*,*,#3148,.F.);
#3361=PLANE('',#3362);
#3362=AXIS2_PLACEMENT_3D('',#1254,#3350,#2220);
#3363=ADVANCED_FACE('',(#3364),#3367,.F.);
#3364=FACE_BOUND('',#3365,.F.);
#3365=EDGE_LOOP('',(#2354,#2359,#2364,#3366));
#3366=ORIENTED_EDGE('',*,*,#3126,.F.);
#3367=PLANE('',#3368);
#3368=AXIS2_PLACEMENT_3D('',#1233,#3350,#2220);
#3369=ADVANCED_FACE('',(#3370),#3373,.F.);
#3370=FACE_BOUND('',#3371,.F.);
#3371=EDGE_LOOP('',(#2341,#2346,#2351,#3372));
#3372=ORIENTED_EDGE('',*,*,#3104,.F.);
#3373=PLANE('',#3374);
#3374=AXIS2_PLACEMENT_3D('',#1212,#3350,#2220);
#3375=ADVANCED_FACE('',(#3376),#3379,.F.);
#3376=FACE_BOUND('',#3377,.F.);
#3377=EDGE_LOOP('',(#2328,#2333,#2338,#3378));
#3378=ORIENTED_EDGE('',*,*,#3082,.F.);
#3379=PLANE('',#3380);
#3380=AXIS2_PLACEMENT_3D('',#1191,#3350,#2220);
#3381=ADVANCED_FACE('',(#3382),#3385,.F.);
#3382=FACE_BOUND('',#3383,.F.);
#3383=EDGE_LOOP('',(#2315,#2320,#2325,#3384));
#3384=ORIENTED_EDGE('',*,*,#3060,.F.);
#3385=PLANE('',#3386);
#3386=AXIS2_PLACEMENT_3D('',#1170,#3350,#2220);
#3387=ADVANCED_FACE('',(#3388),#3391,.F.);
#3388=FACE_BOUND('',#3389,.F.);
#3389=EDGE_LOOP('',(#2302,#2307,#2312,#3390));
#3390=ORIENTED_EDGE('',*,*,#3038,.F.);
#3391=PLANE('',#3392);
#3392=AXIS2_PLACEMENT_3D('',#1149,#3350,#2220);
#3393=ADVANCED_FACE('',(#3394),#3397,.F.);
#3394=FACE_BOUND('',#3395,.F.);
#3395=EDGE_LOOP('',(#2289,#2294,#2299,#3396));
#3396=ORIENTED_EDGE('',*,*,#3016,.F.);
#3397=PLANE('',#3398);
#3398=AXIS2_PLACEMENT_3D('',#1128,#3350,#2220);
#3399=ADVANCED_FACE('',(#3400),#3403,.F.);
#3400=FACE_BOUND('',#3401,.F.);
#3401=EDGE_LOOP('',(#2276,#2281,#2286,#3402));
#3402=ORIENTED_EDGE('',*,*,#2994,.F.);
#3403=PLANE('',#3404);
#3404=AXIS2_PLACEMENT_3D('',#1107,#3350,#2220);
#3405=ADVANCED_FACE('',(#3406),#3409,.F.);
#3406=FACE_BOUND('',#3407,.F.);
#3407=EDGE_LOOP('',(#2263,#2268,#2273,#3408));
#3408=ORIENTED_EDGE('',*,*,#2972,.F.);
#3409=PLANE('',#3410);
#3410=AXIS2_PLACEMENT_3D('',#1086,#3350,#2220);
#3411=ADVANCED_FACE('',(#3412),#3415,.F.);
#3412=FACE_BOUND('',#3413,.F.);
#3413=EDGE_LOOP('',(#2250,#2255,#2260,#3414));
#3414=ORIENTED_EDGE('',*,*,#2950,.F.);
#3415=PLANE('',#3416);
#3416=AXIS2_PLACEMENT_3D('',#1065,#3350,#2220);
#3417=ADVANCED_FACE('',(#3418),#3421,.F.);
#3418=FACE_BOUND('',#3419,.F.);
#3419=EDGE_LOOP('',(#2237,#2242,#2247,#3420));
#3420=ORIENTED_EDGE('',*,*,#2928,.F.);
#3421=PLANE('',#3422);
#3422=AXIS2_PLACEMENT_3D('',#1044,#3350,#2220);
#3423=ADVANCED_FACE('',(#3424),#3427,.F.);
#3424=FACE_BOUND('',#3425,.F.);
#3425=EDGE_LOOP('',(#2224,#2229,#2234,#3426));
#3426=ORIENTED_EDGE('',*,*,#2906,.F.);
#3427=PLANE('',#3428);
#3428=AXIS2_PLACEMENT_3D('',#1023,#3350,#2220);
#3429=ADVANCED_FACE('',(#3430),#3433,.F.);
#3430=FACE_BOUND('',#3431,.F.);
#3431=EDGE_LOOP('',(#2209,#2214,#2221,#3432));
#3432=ORIENTED_EDGE('',*,*,#2883,.F.);
#3433=PLANE('',#3434);
#3434=AXIS2_PLACEMENT_3D('',#995,#3350,#2220);
#3435=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#3439)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#3436,#3437,#3438)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );
#3436=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
#3437=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
#3438=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
#3439=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#3436,'distance_accuracy_value','confusion accuracy');
#3440=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));
#3441=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#3442,#3452,#3453,#3454,#3455,#3464,#3465,#3466,#3467,#3468,#3469,#3470,#3471,#3472,#3473,#3474,#3475,#3476,#3477,#3478,#3479,#3480,#3489,#3490,#3491,#3492,#3493,#3494,#3495,#3496,#3497,#3498,#3499,#3500,#3501,#3502,#3503,#3504,#3505,#3506,#3507,#3508,#3509,#3510,#3511,#3512,#3513,#3514,#3515,#3516,#3517,#3518,#3519,#3520,#3521,#3522,#3523,#3524,#3525,#3526,#3527,#3528,#3529,#3530,#3531,#3532,#3533,#3534,#3535,#3536,#3537,#3538,#3539,#3540,#3541,#3542,#3543,#3544,#3545,#3546,#3547,#3548,#3549,#3550,#3551,#3552,#3553,#3554,#3555,#3556,#3557,#3558,#3559,#3560,#3561,#3562,#3563,#3564,#3565,#3566,#3567,#3568,#3569,#3570,#3571,#3572,#3573,#3574,#3575,#3576,#3577,#3578,#3579,#3580,#3581,#3582,#3583,#3584,#3585,#3586,#3587,#3588,#3589,#3590,#3591,#3592,#3593,#3594),#3435);
#3442=STYLED_ITEM('color',(#3443),#17);
#3443=PRESENTATION_STYLE_ASSIGNMENT((#3444,#3450));
#3444=SURFACE_STYLE_USAGE(.BOTH.,#3445);
#3445=SURFACE_SIDE_STYLE('',(#3446));
#3446=SURFACE_STYLE_FILL_AREA(#3447);
#3447=FILL_AREA_STYLE('',(#3448));
#3448=FILL_AREA_STYLE_COLOUR('',#3449);
#3449=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);
#3450=CURVE_STYLE('',#3451,POSITIVE_LENGTH_MEASURE(0.1),#3449);
#3451=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
#3452=STYLED_ITEM('color',(#3443),#333);
#3453=STYLED_ITEM('color',(#3443),#361);
#3454=STYLED_ITEM('color',(#3443),#662);
#3455=STYLED_ITEM('color',(#3456),#1817);
#3456=PRESENTATION_STYLE_ASSIGNMENT((#3457,#3463));
#3457=SURFACE_STYLE_USAGE(.BOTH.,#3458);
#3458=SURFACE_SIDE_STYLE('',(#3459));
#3459=SURFACE_STYLE_FILL_AREA(#3460);
#3460=FILL_AREA_STYLE('',(#3461));
#3461=FILL_AREA_STYLE_COLOUR('',#3462);
#3462=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);
#3463=CURVE_STYLE('',#3451,POSITIVE_LENGTH_MEASURE(0.1),#3462);
#3464=STYLED_ITEM('color',(#3456),#1829);
#3465=STYLED_ITEM('color',(#3456),#1840);
#3466=STYLED_ITEM('color',(#3456),#1851);
#3467=STYLED_ITEM('color',(#3456),#1862);
#3468=STYLED_ITEM('color',(#3456),#1873);
#3469=STYLED_ITEM('color',(#3456),#1884);
#3470=STYLED_ITEM('color',(#3456),#1895);
#3471=STYLED_ITEM('color',(#3456),#1906);
#3472=STYLED_ITEM('color',(#3456),#1917);
#3473=STYLED_ITEM('color',(#3456),#1928);
#3474=STYLED_ITEM('color',(#3456),#1939);
#3475=STYLED_ITEM('color',(#3456),#1950);
#3476=STYLED_ITEM('color',(#3456),#1961);
#3477=STYLED_ITEM('color',(#3456),#1972);
#3478=STYLED_ITEM('color',(#3443),#1983);
#3479=STYLED_ITEM('color',(#3443),#2205);
#3480=STYLED_ITEM('color',(#3481),#2409);
#3481=PRESENTATION_STYLE_ASSIGNMENT((#3482,#3488));
#3482=SURFACE_STYLE_USAGE(.BOTH.,#3483);
#3483=SURFACE_SIDE_STYLE('',(#3484));
#3484=SURFACE_STYLE_FILL_AREA(#3485);
#3485=FILL_AREA_STYLE('',(#3486));
#3486=FILL_AREA_STYLE_COLOUR('',#3487);
#3487=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);
#3488=CURVE_STYLE('',#3451,POSITIVE_LENGTH_MEASURE(0.1),#3487);
#3489=STYLED_ITEM('color',(#3456),#2415);
#3490=STYLED_ITEM('color',(#3456),#2423);
#3491=STYLED_ITEM('color',(#3456),#2431);
#3492=STYLED_ITEM('color',(#3456),#2439);
#3493=STYLED_ITEM('color',(#3456),#2447);
#3494=STYLED_ITEM('color',(#3456),#2455);
#3495=STYLED_ITEM('color',(#3456),#2463);
#3496=STYLED_ITEM('color',(#3456),#2471);
#3497=STYLED_ITEM('color',(#3456),#2479);
#3498=STYLED_ITEM('color',(#3456),#2487);
#3499=STYLED_ITEM('color',(#3456),#2495);
#3500=STYLED_ITEM('color',(#3456),#2503);
#3501=STYLED_ITEM('color',(#3456),#2511);
#3502=STYLED_ITEM('color',(#3456),#2519);
#3503=STYLED_ITEM('color',(#3456),#2527);
#3504=STYLED_ITEM('color',(#3456),#2535);
#3505=STYLED_ITEM('color',(#3456),#2546);
#3506=STYLED_ITEM('color',(#3456),#2559);
#3507=STYLED_ITEM('color',(#3456),#2569);
#3508=STYLED_ITEM('color',(#3456),#2581);
#3509=STYLED_ITEM('color',(#3456),#2591);
#3510=STYLED_ITEM('color',(#3456),#2603);
#3511=STYLED_ITEM('color',(#3456),#2613);
#3512=STYLED_ITEM('color',(#3456),#2625);
#3513=STYLED_ITEM('color',(#3456),#2635);
#3514=STYLED_ITEM('color',(#3456),#2647);
#3515=STYLED_ITEM('color',(#3456),#2657);
#3516=STYLED_ITEM('color',(#3456),#2669);
#3517=STYLED_ITEM('color',(#3456),#2679);
#3518=STYLED_ITEM('color',(#3456),#2691);
#3519=STYLED_ITEM('color',(#3456),#2701);
#3520=STYLED_ITEM('color',(#3456),#2713);
#3521=STYLED_ITEM('color',(#3456),#2723);
#3522=STYLED_ITEM('color',(#3456),#2735);
#3523=STYLED_ITEM('color',(#3456),#2745);
#3524=STYLED_ITEM('color',(#3456),#2757);
#3525=STYLED_ITEM('color',(#3456),#2767);
#3526=STYLED_ITEM('color',(#3456),#2779);
#3527=STYLED_ITEM('color',(#3456),#2789);
#3528=STYLED_ITEM('color',(#3456),#2801);
#3529=STYLED_ITEM('color',(#3456),#2811);
#3530=STYLED_ITEM('color',(#3456),#2823);
#3531=STYLED_ITEM('color',(#3456),#2833);
#3532=STYLED_ITEM('color',(#3456),#2845);
#3533=STYLED_ITEM('color',(#3456),#2855);
#3534=STYLED_ITEM('color',(#3456),#2867);
#3535=STYLED_ITEM('color',(#3456),#2877);
#3536=STYLED_ITEM('color',(#3456),#2890);
#3537=STYLED_ITEM('color',(#3456),#2900);
#3538=STYLED_ITEM('color',(#3456),#2912);
#3539=STYLED_ITEM('color',(#3456),#2922);
#3540=STYLED_ITEM('color',(#3456),#2934);
#3541=STYLED_ITEM('color',(#3456),#2944);
#3542=STYLED_ITEM('color',(#3456),#2956);
#3543=STYLED_ITEM('color',(#3456),#2966);
#3544=STYLED_ITEM('color',(#3456),#2978);
#3545=STYLED_ITEM('color',(#3456),#2988);
#3546=STYLED_ITEM('color',(#3456),#3000);
#3547=STYLED_ITEM('color',(#3456),#3010);
#3548=STYLED_ITEM('color',(#3456),#3022);
#3549=STYLED_ITEM('color',(#3456),#3032);
#3550=STYLED_ITEM('color',(#3456),#3044);
#3551=STYLED_ITEM('color',(#3456),#3054);
#3552=STYLED_ITEM('color',(#3456),#3066);
#3553=STYLED_ITEM('color',(#3456),#3076);
#3554=STYLED_ITEM('color',(#3456),#3088);
#3555=STYLED_ITEM('color',(#3456),#3098);
#3556=STYLED_ITEM('color',(#3456),#3110);
#3557=STYLED_ITEM('color',(#3456),#3120);
#3558=STYLED_ITEM('color',(#3456),#3132);
#3559=STYLED_ITEM('color',(#3456),#3142);
#3560=STYLED_ITEM('color',(#3456),#3154);
#3561=STYLED_ITEM('color',(#3456),#3164);
#3562=STYLED_ITEM('color',(#3456),#3176);
#3563=STYLED_ITEM('color',(#3456),#3186);
#3564=STYLED_ITEM('color',(#3456),#3198);
#3565=STYLED_ITEM('color',(#3456),#3208);
#3566=STYLED_ITEM('color',(#3456),#3218);
#3567=STYLED_ITEM('color',(#3456),#3227);
#3568=STYLED_ITEM('color',(#3456),#3236);
#3569=STYLED_ITEM('color',(#3456),#3245);
#3570=STYLED_ITEM('color',(#3456),#3254);
#3571=STYLED_ITEM('color',(#3456),#3263);
#3572=STYLED_ITEM('color',(#3456),#3272);
#3573=STYLED_ITEM('color',(#3456),#3281);
#3574=STYLED_ITEM('color',(#3456),#3290);
#3575=STYLED_ITEM('color',(#3456),#3299);
#3576=STYLED_ITEM('color',(#3456),#3308);
#3577=STYLED_ITEM('color',(#3456),#3317);
#3578=STYLED_ITEM('color',(#3456),#3326);
#3579=STYLED_ITEM('color',(#3456),#3335);
#3580=STYLED_ITEM('color',(#3456),#3344);
#3581=STYLED_ITEM('color',(#3456),#3351);
#3582=STYLED_ITEM('color',(#3456),#3357);
#3583=STYLED_ITEM('color',(#3456),#3363);
#3584=STYLED_ITEM('color',(#3456),#3369);
#3585=STYLED_ITEM('color',(#3456),#3375);
#3586=STYLED_ITEM('color',(#3456),#3381);
#3587=STYLED_ITEM('color',(#3456),#3387);
#3588=STYLED_ITEM('color',(#3456),#3393);
#3589=STYLED_ITEM('color',(#3456),#3399);
#3590=STYLED_ITEM('color',(#3456),#3405);
#3591=STYLED_ITEM('color',(#3456),#3411);
#3592=STYLED_ITEM('color',(#3456),#3417);
#3593=STYLED_ITEM('color',(#3456),#3423);
#3594=STYLED_ITEM('color',(#3456),#3429);
ENDSEC;
END-ISO-10303-21;
View Git Blame Copy Permalink