Added JST BM09B-SRSS #69

Open

cptkoolbeenz wants to merge 15 commits from cptkoolbeenz/master into master

cptkoolbeenz commented

2020-08-15 20:14:09 +00:00

(Migrated from github.com)

No description provided.

msamy0 commented

2020-11-02 13:06:54 +00:00

(Migrated from github.com)

JST BM09B-SRSS-TB.STEP

Plastic color recommended to be more Yellowish.
Leads should be Tin colored.
plastic edges should be rounded with fillets.
origin point should be on the lowest point of the model, on the bottom leads surface, as the model will set on it in Altium's footprint, other wise the model will collides with the PCB and force you to move it manually in Altium Interface which is not handy.
rotate the model 90 CW around X-Axis so that Z-axis is facing upward.
it is better to name the model like this JST - BM09B-SRSS-TB.STEP, instead of that JST BM09B-SRSS-TB.STEP

**JST BM09B-SRSS-TB.STEP** - Plastic color recommended to be more Yellowish. - Leads should be Tin colored. - plastic edges should be rounded with fillets. - origin point should be on the lowest point of the model, on the bottom leads surface, as the model will set on it in Altium's footprint, other wise the model will collides with the PCB and force you to move it manually in Altium Interface which is not handy. - rotate the model 90 CW around X-Axis so that Z-axis is facing upward. ![Image of rotation](https://user-images.githubusercontent.com/64434690/97870835-332fea00-1d1c-11eb-9cbe-37d9ed4bf5cf.png) - it is better to name the model like this **JST - BM09B-SRSS-TB.STEP**, instead of that **JST BM09B-SRSS-TB.STEP**

msamy0 commented

2020-11-02 13:14:30 +00:00

(Migrated from github.com)

E-Switch TL1105RF160Q94VO.step

there are some miss coloring on the back as this faces are brown plastic >>
Same as the previous part for the origin point. It should be positioned on the seating surface.
Same as the previous part, the model should be rotated so that Z-axis point upward.
it is better to name it as E-Switch - TL1105RF160Q94VO.step instead of E-Switch TL1105RF160Q94VO.step .

**E-Switch TL1105RF160Q94VO.step** - there are some miss coloring on the back as this faces are brown plastic >> ![image](https://user-images.githubusercontent.com/64434690/97871286-f31d3700-1d1c-11eb-8454-bdf078d99504.png) - Same as the previous part for the origin point. It should be positioned on the seating surface. ![image](https://user-images.githubusercontent.com/64434690/97871589-658e1700-1d1d-11eb-9e85-5b4490590a1c.png) - Same as the previous part, the model should be rotated so that Z-axis point upward. ![image](https://user-images.githubusercontent.com/64434690/97871820-abe37600-1d1d-11eb-8114-399a07c48eaa.png) - it is better to name it as **E-Switch - TL1105RF160Q94VO.step** instead of **E-Switch TL1105RF160Q94VO.step** .

msamy0 commented

2020-11-02 13:33:02 +00:00

(Migrated from github.com)

PCB - CONNECTOR - JST - JST BM09B-SRSS-TB.PCBLIB

Mechanical 15 line width is 0.05mm not 0.2mm. the + mark on the origin could be 0.1mm line width, but the contour must be 0.05mm width.
Top overlay (Silkscreen) should draw out the plastic body of the component, not the leads. See image >>
Mechanical 13 is used that way to line out the component body, with line width of 0.1mm. we also add a circle in the same layer on pin1 to specialize it, but it is not required here as it is connector.
Height is 4.25mm not 2.95mm

**PCB - CONNECTOR - JST - JST BM09B-SRSS-TB.PCBLIB** - Mechanical 15 line width is 0.05mm not 0.2mm. the + mark on the origin could be 0.1mm line width, but the contour must be 0.05mm width. - Top overlay (Silkscreen) should draw out the plastic body of the component, not the leads. See image >> ![Untitled](https://user-images.githubusercontent.com/64434690/97873081-c74f8080-1d1f-11eb-94eb-8ed9108f61ab.png) - Mechanical 13 is used that way to line out the component body, with line width of 0.1mm. we also add a circle in the same layer on pin1 to specialize it, but it is not required here as it is connector. - Height is **4.25mm** not 2.95mm ![image](https://user-images.githubusercontent.com/64434690/97873686-ab98aa00-1d20-11eb-8475-fce7f63f882c.png)

msamy0 commented

2020-11-02 13:42:27 +00:00

(Migrated from github.com)

PCB - SWITCH - E-SWITCH TL1105RF160Q94VO.PcbLib

Name and Description are wrong. Name = E-SWITCH TL1105RF160Q94VO.PcbLib.
This outline should be located in Mechanical 13 layer not Mechanical 1

**PCB - SWITCH - E-SWITCH TL1105RF160Q94VO.PcbLib** - Name and Description are wrong. Name = **E-SWITCH TL1105RF160Q94VO.PcbLib**. ![Name and Description are wrong](https://user-images.githubusercontent.com/64434690/97874340-85273e80-1d21-11eb-96ff-03f572cb55d6.png) - This outline should be located in Mechanical 13 layer not Mechanical 1 ![This outline should be located in Mechanical 13 layer not Mechanical 1 ](https://user-images.githubusercontent.com/64434690/97874604-e5b67b80-1d21-11eb-98c4-73835d3cfb19.png)

This pull request can be merged automatically.

You are not authorized to merge this pull request.

View command line instructions.