Wrong parameters in inductor library #64

New Issue

Closed

opened 2020-07-13 09:31:53 +00:00 by XaviOndono · 1 comment

XaviOndono commented

2020-07-13 09:31:53 +00:00

(Migrated from github.com)

There's a lot of components on the inductors - RF table which have the "Package / case" set to
0402 (1006 Metric)
This is probably a typo and should read:
0402 (1005 Metric)

There's a lot of components on the inductors - RF table which have the "Package / case" set to `0402 (1006 Metric)` This is probably a typo and should read: `0402 (1005 Metric)`

issus commented

2020-07-13 13:42:48 +00:00

(Migrated from github.com)

In this case, 0.5mm is 0.01968in, and 0.6mm is 0.02362in, so both get rounded to "02" for the imperial component size.

There are many cases where an imperial size just gets rounded (40 thou by 20 thou inches) but the metric size is able to be more precise, so the sizes look like they could be a mistake, but if you check the datasheet the metric size is actually correct. In this case, 0.5mm is 0.01968in, and 0.6mm is 0.02362in, so both get rounded to "02" for the imperial component size.

1 Participants

Notifications

Due Date

No due date set.

Dependencies

No dependencies set.

Reference: AllSpice-Resources/Altium-Celestial-library#64

No description provided.