README.md

@@ -1,42 +1,42 @@
-# Archimajor
-
-<img align="left" width="300" height="200" src="/.allspice/PCB.PNG">
-
-## Summary
-
-3D printer motherboard, designed by [Ultimachine](https://ultimachine.com/). Features include:
-
-- **5x integrated 256 microstep motor drivers**
-- **6x PWM Mosfet outputs**
-- **4x thermistor inputs**
-- **SPI (Serial Peripheral Interface)**
-- ** Removed infinite loop on self-calibration.
-
----
-
-## Specifications
-
-### General Specifications
-
-**Input Power Supply**: 12V - 24V DC, 16A+
-
-**Operating Temperature Range (est.)**: 0dC ~ 70dC
-
-## Firmware
-
-[Source](https://github.com/ultimachine/Marlin4due/tree/Archim2)
-
-[Binary](https://github.com/MarlinFirmware/Marlin/archive/bugfix-2.0.x.zip)
-
-## Bill of Materials
-
-[Archimajor.csv](./Archimajor.csv)
-
-## Note
-
-Changed heat bed fuse holder to yellow to differentiate channels.
-
-
-## Disclaimer
-
-*NOTE: This does not represent actual data from the Rambo/Archimajor PCBA
+# Archimajor
+
+<img align="left" width="300" height="200" src="./.allspice/PCB.PNG">
+
+## Summary
+
+3D printer motherboard, designed by [Ultimachine](https://ultimachine.com/). Features include:
+
+- **5x integrated 256 microstep motor drivers**
+- **6x PWM Mosfet outputs**
+- **4x thermistor inputs**
+- **SPI (Serial Peripheral Interface)**
+- ** Removed infinite loop on self-calibration.
+
+---
+
+## Specifications
+
+### General Specifications
+
+**Input Power Supply**: 12V - 24V DC, 16A+
+
+**Operating Temperature Range (est.)**: 0dC ~ 70dC
+
+## Firmware
+
+[Source](https://github.com/ultimachine/Marlin4due/tree/Archim2)
+
+[Binary](https://github.com/MarlinFirmware/Marlin/archive/bugfix-2.0.x.zip)
+
+## Bill of Materials
+
+[Archimajor.csv](./Archimajor.csv)
+
+## Note
+
+Changed heat bed fuse holder to yellow to differentiate channels.
+
+
+## Disclaimer
+
+*NOTE: This does not represent actual data from the Rambo/Archimajor PCBA