AllSpiceMirrors/ThunderScope
7
Fork 0
mirror of https://github.com/EEVengers/ThunderScope.git synced 2025-04-22 17:43:44 +00:00
Files Issues Releases Activity

Update README.md

Browse Source
This commit is contained in:
Aleksa Bjelogrlic 2024-06-24 23:12:46 -04:00 committed by GitHub
parent 61eb1d4f72
commit ec7abda268
No known key found for this signature in database
GPG Key ID: B5690EEEBB952194
1 changed files with 5 additions and 4 deletions

9
README.md
View File

@ -17,7 +17,8 @@ Catch up with these videos on the project:
[Teardown Session 39: ThunderScope](https://www.youtube.com/watch?v=HIrENqQAbHI)
___
## Quick Start Guide
These are instructions for the XDMA gateware, which is currently the most stable gateware and driver.
@ -37,8 +38,10 @@ These are instructions for the XDMA gateware, which is currently the most stable
4. Run TS.NET.Engine and ngscopeclient
5. Add ThunderScope in ngscopeclient under Add -> Oscilloscope with "thunderscope" Driver, "Twinlan" Transport and "Localhost:5025:5026" for the Path
## Troubleshooting
If you are getting under ~1000MB/s throughput on Linux, try turning off VT-d (Intel) or IOMMU/AMD-Vi (AMD) in BIOS or using "intel_iommu=off" in GRUB (Intel)
___
## Baseboard Hardware
| Revision | Label | Status | Location |
@ -57,7 +60,6 @@ ___
| Rev.1 | DEPRECATED | Hardware/Altium/FPGA_Module |
| Rev.2 | ACTIVE | Hardware/Altium/FPGA_Module_Rev2 or Hardware/KiCad/FPGA_Module_Rev2|
___
## Firmware
We have two types of firmware, LiteX and XDMA. We are in the process of updating the LiteX firmware to work on the latest hardware, and we will use it moving forward. Until then, use the XDMA firmware if you are not working on LiteX.
@ -74,7 +76,6 @@ Follow the instructions in the Software/xdma_driver_linux or Software/xdma_drive
For LiteX developers, the Linux driver is stable. [Windows](https://github.com/NateMeyer/litepcie_driver_win) and [Mac](https://github.com/tech2077/litepcie-macos-driver) drivers are in development.
___
## Software
Our primary software is [TS.NET](https://github.com/macaba/TS.NET), which takes in data from the hardware, triggers on it, and sends the triggered data over to [ngscopeclient](https://www.ngscopeclient.org/)