2.6 KiB
Build Guide Tilting / Tenting plate
Parts
| Name | Count | Remarks |
|---|---|---|
| Completed Corne Cherry | 1 set | Corne Chocolate / 3mm top plate is not supported |
| Middle plate 3mm | 2 sheets | |
| Bottom plate 3mm | 2 sheets | |
| Bolt M5 15mm ~ 50mm | 8 bolts | |
| Nut M5 | 16 pieces | |
| Screw M2 6mm | 10 screws | |
| Screw M2 4mm | 10 screws | |
| Spacer M2 3.5mm | 10 pieces | |
| Cushion rubber | 8 pieces |
Advance preparation
Remove the key switch from the finished Corne Cherry to separate the body from the top plate. No other parts are needed.
Assembly
Check the required parts. Check the dedicated middle plate and bottom plate, and bolts of various lengths. In addition, use screws, nuts, spacers, etc. (see the parts section for details).
Secure the middle plate to the top plate with 6mm screws and 3.5mm spacers.
Secure the OLED display protection plate with 4mm screws.
Secure the body and bottom plate with 4mm screws.
Insert an acrylic spacer between the middle plate and the bottom plate and attach the bolts.
It is recommended to temporarily assemble the bolts and adjust the height before completely fixing them with nuts. Temporary assembly can be done easily by passing only one nut through the bolt.
It is completed by firmly fixing it so that it is sandwiched between nuts.
