Firmware

This is the Corne v1-v3(rev1) firmware guide。

Flash the firmware

Use Remap

The easiest and most recommended way is to go to Remap and select FLASH for crkbd:via.

Once the firmware has been written to one side, follow the same procedure for the other side.

Use QMK Toolbox

Download the firmware of VIA from crkbd_rev1_via.hex

With the keyboard connected via USB, press the reset button twice or short GND & RST pins on ProMicro to start flashing the firmware.
If you see the message, it's done.

Once the firmware has been written to one side, follow the same procedure for the other side.

(Optional) If you build the firmware yourself

Please refer to https://github.com/foostan/kbd_firmware.

Change your keymap

VIA can be used by flashing the firmware for VIA.

1.3 KiB Raw Permalink Blame History