|
Audio_Module.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Battery.pretty
|
Battery: regenerate remaining batery holders (remove incorrect named MPD BH-18650-PC2)
|
2025-03-29 17:33:39 +00:00 |
|
Button_Switch_Keyboard.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Button_Switch_SMD.pretty
|
Regenerate Buttons_Switches (format only)
|
2025-03-13 13:41:08 +01:00 |
|
Button_Switch_THT.pretty
|
Regenerate Buttons_Switches (format only)
|
2025-03-13 13:41:08 +01:00 |
|
Buzzer_Beeper.pretty
|
Buzzer_Beeper: Add missing generated buzzers
|
2025-03-21 17:06:13 +00:00 |
|
Calibration_Scale.pretty
|
Upgrade non-generated footprints to v9 format
|
2025-02-18 22:41:57 +01:00 |
|
Capacitor_SMD.pretty
|
Stylistic improvements of FP generator: SMD_2terminal_chip_molded
|
2025-03-27 21:23:09 +00:00 |
|
Capacitor_Tantalum_SMD.pretty
|
Stylistic improvements of FP generator: SMD_2terminal_chip_molded
|
2025-03-27 21:23:09 +00:00 |
|
Capacitor_THT.pretty
|
Assorted geometric fixups
|
2025-04-10 08:16:56 +00:00 |
|
CMakeModules
|
Add install/uninstall capability using CMake.
|
2018-01-20 11:20:09 -05:00 |
|
Connector_AMASS.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Amphenol.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Audio.pretty
|
Regenerate Connector_Audio (format only)
|
2025-03-15 16:32:35 +01:00 |
|
Connector_BarrelJack.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Card.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Coaxial.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_DIN.pretty
|
Add DIN 41612 Type M
|
2025-04-05 11:51:54 +00:00 |
|
Connector_Dsub.pretty
|
Regenerate Connector_Dsub (format change only)
|
2025-03-13 12:53:36 +01:00 |
|
Connector_FFC-FPC.pretty
|
Add FP generator: Connector Amphenol F32Q F32R (FPC/FFC)
|
2025-04-05 14:40:14 +00:00 |
|
Connector_Harting.pretty
|
Regenerate Connector_Harting (format only)
|
2025-03-13 13:29:23 +01:00 |
|
Connector_Harwin.pretty
|
Generate new Harwin Gecko G125 parts
|
2025-03-25 19:49:45 +00:00 |
|
Connector_Hirose_FX8.pretty
|
Regenerate connector generators
|
2025-03-17 13:53:12 +00:00 |
|
Connector_Hirose.pretty
|
Regenerate Connector_SMD_single_row_plus_mounting_pad (format and horizontal/vertical fix)
|
2025-03-16 09:46:56 +00:00 |
|
Connector_IDC.pretty
|
Regenerate parts that had not set a max round rect radius
|
2025-03-21 17:09:32 +00:00 |
|
Connector_JAE_WP7B.pretty
|
Regenerate connector generators
|
2025-03-17 13:53:12 +00:00 |
|
Connector_JAE.pretty
|
Regenerate after fixing sorting order of pad names and copied lines, circles, polygons
|
2025-03-20 18:23:44 +01:00 |
|
Connector_JST.pretty
|
SMD single row + MP: better defaults for pin1 fab marker
|
2025-04-13 17:16:13 +00:00 |
|
Connector_Molex.pretty
|
Expand additional drawing system for polygons and crosses, use in SMD single row and BGA
|
2025-03-28 20:39:24 +00:00 |
|
Connector_PCBEdge.pretty
|
Regenerate Connector_Samtec (format and small geometry changes)
|
2025-03-16 04:18:16 +00:00 |
|
Connector_Phoenix_GMSTB.pretty
|
Regenerate after fixing sorting order of pad names and copied lines, circles, polygons
|
2025-03-20 18:23:44 +01:00 |
|
Connector_Phoenix_MC_HighVoltage.pretty
|
Regenerate after fixing sorting order of pad names and copied lines, circles, polygons
|
2025-03-20 18:23:44 +01:00 |
|
Connector_Phoenix_MC.pretty
|
Regenerate after fixing sorting order of pad names and copied lines, circles, polygons
|
2025-03-20 18:23:44 +01:00 |
|
Connector_Phoenix_MSTB.pretty
|
Regenerate after fixing sorting order of pad names and copied lines, circles, polygons
|
2025-03-20 18:23:44 +01:00 |
|
Connector_Phoenix_SPT.pretty
|
Regenerate Connector_Phoenix_SPT (format only)
|
2025-03-15 16:39:13 +01:00 |
|
Connector_Pin.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_PinHeader_1.00mm.pretty
|
PinHeader: Regenerate with better pin 1 fill
|
2025-03-16 12:50:41 +00:00 |
|
Connector_PinHeader_1.27mm.pretty
|
PinHeader: Regenerate with better pin 1 fill
|
2025-03-16 12:50:41 +00:00 |
|
Connector_PinHeader_2.00mm.pretty
|
PinHeader: Regenerate with better pin 1 fill
|
2025-03-16 12:50:41 +00:00 |
|
Connector_PinHeader_2.54mm.pretty
|
PinHeader: Regenerate with better pin 1 fill
|
2025-03-16 12:50:41 +00:00 |
|
Connector_PinSocket_1.00mm.pretty
|
Regenerate Connector_PinSocket (format change and circular ovals to circles)
|
2025-03-16 10:21:35 +00:00 |
|
Connector_PinSocket_1.27mm.pretty
|
Regenerate Connector_PinSocket (format change and circular ovals to circles)
|
2025-03-16 10:21:35 +00:00 |
|
Connector_PinSocket_2.00mm.pretty
|
Regenerate Connector_PinSocket (format change and circular ovals to circles)
|
2025-03-16 10:21:35 +00:00 |
|
Connector_PinSocket_2.54mm.pretty
|
Regenerate Connector_PinSocket (format change and circular ovals to circles)
|
2025-03-16 10:21:35 +00:00 |
|
Connector_RJ.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Samtec_HLE_SMD.pretty
|
Regenerate connector generators
|
2025-03-17 13:53:12 +00:00 |
|
Connector_Samtec_HLE_THT.pretty
|
Regenerate connector generators
|
2025-03-17 13:53:12 +00:00 |
|
Connector_Samtec_HPM_THT.pretty
|
PinHeader: Regenerate with current generator (format + minor geometry)
|
2025-03-16 12:50:41 +00:00 |
|
Connector_Samtec_HSEC8.pretty
|
Regenerate connector generators
|
2025-03-17 13:53:12 +00:00 |
|
Connector_Samtec_MicroMate.pretty
|
Regenerate connector generators
|
2025-03-17 13:53:12 +00:00 |
|
Connector_Samtec_MicroPower.pretty
|
Regenerate parts that had not set a max round rect radius
|
2025-03-21 17:09:32 +00:00 |
|
Connector_Samtec.pretty
|
Added Samtec SS4 series
|
2025-04-06 17:44:07 +00:00 |
|
Connector_SATA_SAS.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Stocko.pretty
|
Regenerate Connector_Stocko (format change only)
|
2025-03-13 12:58:02 +01:00 |
|
Connector_TE-Connectivity.pretty
|
Regenerate TE connectivity parts (except new files)
|
2025-03-17 15:52:27 +00:00 |
|
Connector_USB.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Video.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Connector_Wago.pretty
|
Regenerate Connector_Wago (format, correct tags for vertical and horizontal)
|
2025-03-16 09:24:23 +01:00 |
|
Connector_Wire.pretty
|
Fix wire URLs and update definitions from the source
|
2025-03-29 14:48:04 +00:00 |
|
Connector_Wuerth.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Connector.pretty
|
Connector: Add BJB Pico 46.110.1001 single receptacle
|
2025-04-12 09:33:46 +00:00 |
|
Converter_ACDC.pretty
|
Converter_ACDC: Generate Vigortronix VTX-214-015-1xx (and get it the right way round)
|
2025-04-08 08:57:24 +00:00 |
|
Converter_DCDC.pretty
|
Drawing tools: collection of minor fixes
|
2025-04-12 08:42:27 +00:00 |
|
Crystal.pretty
|
Crystal: rework parameters for handsoldering and datasheets in data
|
2025-04-04 19:37:22 +00:00 |
|
Diode_SMD.pretty
|
Change datasheet URL of D_SOD-882D
|
2025-03-31 10:27:17 +00:00 |
|
Diode_THT.pretty
|
Resistor/Inductor/Cap: Use real Rects and rounded pads
|
2025-04-06 10:42:31 +00:00 |
|
Display_7Segment.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Display.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Ferrite_THT.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Fiducial.pretty
|
Fiducial: Use generated footprints
|
2025-03-09 21:05:18 +00:00 |
|
Filter.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Fuse.pretty
|
Stylistic improvements of FP generator: SMD_2terminal_chip_molded
|
2025-03-27 21:23:09 +00:00 |
|
Heatsink.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Inductor_SMD_Wurth.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Inductor_SMD.pretty
|
StandardBox: use global config rounding radius handler
|
2025-03-29 15:03:18 +00:00 |
|
Inductor_THT_Wurth.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Inductor_THT.pretty
|
Chokes_THT and Package_DIP: Omit _BigPads, _LongPads and _ShortPads from 3d model name
|
2025-04-12 11:46:34 +00:00 |
|
Jumper.pretty
|
Jumper: Add Jumper_Harwin_S1621_P10.9mm
|
2025-04-14 13:03:37 +00:00 |
|
LED_SMD.pretty
|
Stylistic improvements of FP generator: SMD_2terminal_chip_molded
|
2025-03-27 21:23:09 +00:00 |
|
LED_THT.pretty
|
Regenerate LEDs_THT (format and geometry changes)
|
2025-03-16 04:26:05 +00:00 |
|
Module.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Motors.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Mounting_Wuerth.pretty
|
Wurth_SMT_Standoff M2.5 Variants
|
2025-03-28 10:39:26 +00:00 |
|
MountingEquipment.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
MountingHole.pretty
|
Fpgen: Add new mounting hole generator, generate all but two existing mounting holes
|
2025-04-10 12:23:06 +00:00 |
|
NetTie.pretty
|
Upgrade non-generated footprints to v9 format
|
2025-02-18 22:41:57 +01:00 |
|
OptoDevice.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Oscillator.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Package_BGA.pretty
|
Add DSBGA-6 Texas YFP0006
|
2025-04-08 08:46:58 +00:00 |
|
Package_CSP.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Package_DFN_QFN.pretty
|
Add Analog Devices VQFN-40 3.5mm EP variant
|
2025-04-16 19:23:08 +00:00 |
|
Package_DIP.pretty
|
Chokes_THT and Package_DIP: Omit _BigPads, _LongPads and _ShortPads from 3d model name
|
2025-04-12 11:46:34 +00:00 |
|
Package_DirectFET.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Package_LCC.pretty
|
Add MO047AD_PLCC-52_19.1x19.1mm_P1.27mm (generated)
|
2025-04-08 09:52:31 +00:00 |
|
Package_LGA.pretty
|
Package_TO_SOT_THT: Cleanup
|
2025-04-16 07:16:09 +00:00 |
|
Package_QFP.pretty
|
Update TQFP-100_14x14mm_P0.5mm, delete VQFP-100_14x14mm_P0.5mm
|
2025-04-16 11:23:12 +00:00 |
|
Package_SIP.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Package_SO_J-Lead.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Package_SO.pretty
|
Package_TO_SOT_THT: Cleanup
|
2025-04-16 07:16:09 +00:00 |
|
Package_SON.pretty
|
Package_TO_SOT_THT: Cleanup
|
2025-04-16 07:16:09 +00:00 |
|
Package_TO_SOT_SMD.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Package_TO_SOT_THT.pretty
|
Package_TO_SOT_THT: Cleanup
|
2025-04-16 07:16:09 +00:00 |
|
Potentiometer_SMD.pretty
|
Potentiometer_SMD: regenerate Bourns_3314R-GM5
|
2025-03-22 21:52:01 +08:00 |
|
Potentiometer_THT.pretty
|
Drawing tools: collection of minor fixes
|
2025-04-12 08:42:27 +00:00 |
|
Relay_SMD.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Relay_THT.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Resistor_SMD.pretty
|
Stylistic improvements of FP generator: SMD_2terminal_chip_molded
|
2025-03-27 21:23:09 +00:00 |
|
Resistor_THT.pretty
|
Fix silkscreen around the resistor R_Axial_Power_L48.0mm_W12.5mm_P7.62mm_Vertical
|
2025-04-06 15:22:00 +00:00 |
|
RF_Antenna.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
RF_Converter.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
RF_GPS.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
RF_GSM.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
RF_Mini-Circuits.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
RF_Module.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
RF_Shielding.pretty
|
Shielding: regenerate RF shield parts
|
2025-03-19 17:35:31 +00:00 |
|
RF_WiFi.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
RF.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Rotary_Encoder.pretty
|
Corrected EC11E descriptions from EC12 to EC11 (5 footprints).
|
2025-03-02 11:40:04 +00:00 |
|
Sensor_Audio.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Sensor_Current.pretty
|
Fix dimensions and geometry of TO-92S. Delete TO-92S-2 and TO-92S_Wide (no parts of that shape seem to exist). Remove redundant Allegro_SIP-3.
|
2025-03-25 14:06:13 +00:00 |
|
Sensor_Distance.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Sensor_Humidity.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Sensor_Motion.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Sensor_Pressure.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Sensor_Voltage.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Sensor.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Socket.pretty
|
Regenerate Socket (format change only)
|
2025-03-13 12:54:48 +01:00 |
|
Symbol.pretty
|
Symbol: Add generated LayerMarker footprints
|
2025-03-19 08:21:15 +00:00 |
|
TerminalBlock_4Ucon.pretty
|
TerminalBlock: remove screw terminal silkscreen graphics
|
2025-03-22 13:35:34 +00:00 |
|
TerminalBlock_Altech.pretty
|
Regenerate TerminalBlock_Altech (format and line to rect only)
|
2025-03-13 13:51:04 +01:00 |
|
TerminalBlock_CUI.pretty
|
TerminalBlock: remove screw terminal silkscreen graphics
|
2025-03-22 13:35:34 +00:00 |
|
TerminalBlock_Dinkle.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
TerminalBlock_MetzConnect.pretty
|
Crystal: regenerate vertical HC-49-style cans
|
2025-04-02 10:52:48 +00:00 |
|
TerminalBlock_Philmore.pretty
|
TerminalBlock: remove screw terminal silkscreen graphics
|
2025-03-22 13:35:34 +00:00 |
|
TerminalBlock_Phoenix.pretty
|
TerminalBlock: remove screw terminal silkscreen graphics
|
2025-03-22 13:35:34 +00:00 |
|
TerminalBlock_RND.pretty
|
TerminalBlock: remove screw terminal silkscreen graphics
|
2025-03-22 13:35:34 +00:00 |
|
TerminalBlock_TE-Connectivity.pretty
|
Regenerate TerminalBlock_TE-Connectivity (format update only)
|
2025-03-13 12:26:23 +01:00 |
|
TerminalBlock_WAGO.pretty
|
Add Wago 2601 terminal blocks to generator script.
|
2025-03-28 14:18:14 +00:00 |
|
TerminalBlock_Wuerth.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
TerminalBlock.pretty
|
TerminalBlock: remove screw terminal silkscreen graphics
|
2025-03-22 13:35:34 +00:00 |
|
TestPoint.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Transformer_SMD.pretty
|
Courtyard utils
|
2025-04-10 20:08:19 +00:00 |
|
Transformer_THT.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Transistor_Power_Module.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Transistor_Power.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Valve.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
Varistor.pretty
|
Update 3D-Model path of all footprints
|
2025-02-18 22:48:38 +01:00 |
|
.gitattributes
|
Add a few more text filetypes to .gitattributes
|
2024-11-18 11:30:31 +01:00 |
|
.gitignore
|
Added .gitignore file
|
2017-11-05 18:44:16 +11:00 |
|
.gitlab-ci.yml
|
Clean out gitlab-ci.yml and use include directive to include copy in library-utils repo
|
2024-02-25 13:36:12 +00:00 |
|
CMakeLists.txt
|
Move cmake version requirement to above project line to stop cmake complaining on releases
|
2023-09-23 16:05:30 +02:00 |
|
CONTRIBUTING.md
|
Update CONTRIBUTING.md
|
2021-10-19 23:22:29 +00:00 |
|
fp-lib-table
|
Update fp-lib-table for KiCad9
|
2025-02-18 22:43:39 +01:00 |
|
LICENSE.md
|
Change KiCad website to kicad.org
|
2021-10-20 10:30:48 +00:00 |
|
README.md
|
README.md: Library is now v9
|
2025-02-18 22:45:06 +01:00 |
f3fd1cf613