Transform jumpers into graphical polygons (#1437)

DRC is not yet smart enough to distinguish jumpered pads when they
touch, so we work around this for 5.1 by using graphical polygons on the
F.Cu layer.

Jumper.pretty/SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm (layer F.Cu) (tedit 5B3911BF)
+(module SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm (layer F.Cu) (tedit 5C745230)
   (descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 2 copper strips")
   (tags "solder jumper open")
   (attr virtual)
@@ -16,14 +16,9 @@
   (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -0.65 0) (size 1 1.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_poly (pts
-         (xy 0.4 0.2) (xy 0.9 0.2) (xy 0.9 0.6) (xy 0.4 0.6)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.6) (xy 0.9 -0.6) (xy 0.9 -0.2) (xy 0.4 -0.2)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.25 0.2) (xy 0.25 0.2) (xy 0.25 0.6) (xy -0.25 0.6)) (layer F.Cu) (width 0))
+  (fp_poly (pts (xy -0.25 -0.6) (xy 0.25 -0.6) (xy 0.25 -0.2) (xy -0.25 -0.2)) (layer F.Cu) (width 0))
+  (pad 1 smd rect (at -0.65 0) (size 1 1.5) (layers F.Cu F.Mask)
+    (zone_connect 2))
   (pad 2 smd rect (at 0.65 0) (size 1 1.5) (layers F.Cu F.Mask))
 )

Jumper.pretty/SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B3916F8)
+(module SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5C74525F)
   (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 2 copper strips")
   (tags "solder jumper open")
   (attr virtual)
@@ -20,19 +20,8 @@
   (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -0.65 0) (size 1 0.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
-      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
-      (gr_poly (pts
-         (xy 0.5 0.75) (xy 0.5 -0.75) (xy 0 -0.75) (xy 0 0.75)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 0.2) (xy 0.9 0.2) (xy 0.9 0.6) (xy 0.4 0.6)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.6) (xy 0.9 -0.6) (xy 0.9 -0.2) (xy 0.4 -0.2)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.25 0.2) (xy 0.25 0.2) (xy 0.25 0.6) (xy -0.25 0.6)) (layer F.Cu) (width 0))
+  (fp_poly (pts (xy -0.25 -0.6) (xy 0.25 -0.6) (xy 0.25 -0.2) (xy -0.25 -0.2)) (layer F.Cu) (width 0))
   (pad 2 smd custom (at 0.65 0) (size 1 0.5) (layers F.Cu F.Mask)
     (zone_connect 2)
     (options (clearance outline) (anchor rect))
@@ -42,4 +31,13 @@
       (gr_poly (pts
          (xy -0.5 0.75) (xy -0.5 -0.75) (xy 0 -0.75) (xy 0 0.75)) (width 0))
     ))
+  (pad 1 smd custom (at -0.65 0) (size 1 0.5) (layers F.Cu F.Mask)
+    (zone_connect 2)
+    (options (clearance outline) (anchor rect))
+    (primitives
+      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
+      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
+      (gr_poly (pts
+         (xy 0.5 0.75) (xy 0.5 -0.75) (xy 0 -0.75) (xy 0 0.75)) (width 0))
+    ))
 )

Jumper.pretty/SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm (layer F.Cu) (tedit 5B391424)
+(module SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm (layer F.Cu) (tedit 5C74526E)
   (descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 1 copper strip")
   (tags "solder jumper open")
   (attr virtual)
@@ -16,12 +16,8 @@
   (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -0.65 0) (size 1 1.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_poly (pts
-         (xy 0.4 -0.3) (xy 0.9 -0.3) (xy 0.9 0.3) (xy 0.4 0.3)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.25 -0.3) (xy 0.25 -0.3) (xy 0.25 0.3) (xy -0.25 0.3)) (layer F.Cu) (width 0))
+  (pad 1 smd rect (at -0.65 0) (size 1 1.5) (layers F.Cu F.Mask)
+    (zone_connect 2))
   (pad 2 smd rect (at 0.65 0) (size 1 1.5) (layers F.Cu F.Mask))
 )

Jumper.pretty/SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B391ABA)
+(module SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5C745284)
   (descr "SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 1 copper strip")
   (tags "solder jumper open")
   (attr virtual)
@@ -20,17 +20,7 @@
   (fp_line (start -1.65 -1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end 1.65 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 1.65 1.25) (end -1.65 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -0.65 0) (size 1 0.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
-      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
-      (gr_poly (pts
-         (xy 0 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy 0 0.75)) (width 0))
-      (gr_poly (pts
-         (xy 0.9 -0.3) (xy 0.4 -0.3) (xy 0.4 0.3) (xy 0.9 0.3)) (width 0))
-    ))
+  (fp_poly (pts (xy 0.25 -0.3) (xy -0.25 -0.3) (xy -0.25 0.3) (xy 0.25 0.3)) (layer F.Cu) (width 0))
   (pad 2 smd custom (at 0.65 0) (size 1 0.5) (layers F.Cu F.Mask)
     (zone_connect 2)
     (options (clearance outline) (anchor rect))
@@ -40,4 +30,13 @@
       (gr_poly (pts
          (xy 0 -0.75) (xy -0.5 -0.75) (xy -0.5 0.75) (xy 0 0.75)) (width 0))
     ))
+  (pad 1 smd custom (at -0.65 0) (size 1 0.5) (layers F.Cu F.Mask)
+    (zone_connect 2)
+    (options (clearance outline) (anchor rect))
+    (primitives
+      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
+      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
+      (gr_poly (pts
+         (xy 0 -0.75) (xy 0.5 -0.75) (xy 0.5 0.75) (xy 0 0.75)) (width 0))
+    ))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm (layer F.Cu) (tedit 5B3914C4)
+(module SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm (layer F.Cu) (tedit 5C7452F1)
   (descr "SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip")
   (tags "solder jumper open")
   (attr virtual)
@@ -19,13 +19,9 @@
   (fp_line (start -2.3 -1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end 2.3 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_poly (pts
-         (xy 0.4 -0.3) (xy 0.9 -0.3) (xy 0.9 0.3) (xy 0.4 0.3)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.3) (xy -0.4 -0.3) (xy -0.4 0.3) (xy -0.9 0.3)) (layer F.Cu) (width 0))
+  (pad 1 smd rect (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
+    (zone_connect 2))
   (pad 3 smd rect (at 1.3 0) (size 1 1.5) (layers F.Cu F.Mask))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5B3914E1)
+(module SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5C745310)
   (descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers")
   (tags "solder jumper open")
   (attr virtual)
@@ -22,13 +22,9 @@
   (fp_line (start -2.3 -1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end 2.3 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_poly (pts
-         (xy 0.4 -0.3) (xy 0.9 -0.3) (xy 0.9 0.3) (xy 0.4 0.3)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.3) (xy -0.4 -0.3) (xy -0.4 0.3) (xy -0.9 0.3)) (layer F.Cu) (width 0))
+  (pad 1 smd rect (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
+    (zone_connect 2))
   (pad 3 smd rect (at 1.3 0) (size 1 1.5) (layers F.Cu F.Mask))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B391DE3)
+(module SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5C745321)
   (descr "SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip")
   (tags "solder jumper open")
   (attr virtual)
@@ -23,17 +23,7 @@
   (fp_arc (start 1.35 0.3) (end 1.35 1) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 0.3) (end -2.05 0.3) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 -0.3) (end -1.35 -1) (angle -90) (layer F.SilkS) (width 0.12))
-  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
-      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
-      (gr_poly (pts
-         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.3) (xy 0.9 -0.3) (xy 0.9 0.3) (xy 0.4 0.3)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.3) (xy -0.4 -0.3) (xy -0.4 0.3) (xy -0.9 0.3)) (layer F.Cu) (width 0))
   (pad 3 smd custom (at 1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
     (zone_connect 2)
     (options (clearance outline) (anchor rect))
@@ -44,4 +34,13 @@
          (xy -0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy -0.55 0.75)) (width 0))
     ))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
+  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
+    (zone_connect 2)
+    (options (clearance outline) (anchor rect))
+    (primitives
+      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
+      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
+      (gr_poly (pts
+         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
+    ))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5B391DD7)
+(module SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5C745336)
   (descr "SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers")
   (tags "solder jumper open")
   (attr virtual)
@@ -26,17 +26,7 @@
   (fp_arc (start 1.35 0.3) (end 1.35 1) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 0.3) (end -2.05 0.3) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 -0.3) (end -1.35 -1) (angle -90) (layer F.SilkS) (width 0.12))
-  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
-      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
-      (gr_poly (pts
-         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.3) (xy 0.9 -0.3) (xy 0.9 0.3) (xy 0.4 0.3)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.3) (xy -0.4 -0.3) (xy -0.4 0.3) (xy -0.9 0.3)) (layer F.Cu) (width 0))
   (pad 3 smd custom (at 1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
     (zone_connect 2)
     (options (clearance outline) (anchor rect))
@@ -47,4 +37,13 @@
          (xy -0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy -0.55 0.75)) (width 0))
     ))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
+  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
+    (zone_connect 2)
+    (options (clearance outline) (anchor rect))
+    (primitives
+      (gr_poly (pts
+         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
+      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
+      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
+    ))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm (layer F.Cu) (tedit 5B391491)
+(module SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm (layer F.Cu) (tedit 5C74529C)
   (descr "SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip")
   (tags "solder jumper open")
   (attr virtual)
@@ -19,15 +19,10 @@
   (fp_line (start -2.3 -1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end 2.3 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_poly (pts
-         (xy 0.4 -0.6) (xy 0.9 -0.6) (xy 0.9 -0.2) (xy 0.4 -0.2)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 0.2) (xy 0.9 0.2) (xy 0.9 0.6) (xy 0.4 0.6)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.6) (xy -0.4 -0.6) (xy -0.4 -0.2) (xy -0.9 -0.2)) (layer F.Cu) (width 0))
+  (fp_poly (pts (xy -0.9 0.2) (xy -0.4 0.2) (xy -0.4 0.6) (xy -0.9 0.6)) (layer F.Cu) (width 0))
+  (pad 1 smd rect (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
+    (zone_connect 2))
   (pad 3 smd rect (at 1.3 0) (size 1 1.5) (layers F.Cu F.Mask))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5B39184F)
+(module SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5C7452AC)
   (descr "SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip, labeled with numbers")
   (tags "solder jumper open")
   (attr virtual)
@@ -22,15 +22,10 @@
   (fp_line (start -2.3 -1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end 2.3 -1.25) (layer F.CrtYd) (width 0.05))
   (fp_line (start 2.3 1.25) (end -2.3 1.25) (layer F.CrtYd) (width 0.05))
-  (pad 1 smd custom (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_poly (pts
-         (xy 0.4 0.2) (xy 0.9 0.2) (xy 0.9 0.6) (xy 0.4 0.6)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.6) (xy 0.9 -0.6) (xy 0.9 -0.2) (xy 0.4 -0.2)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 0.2) (xy -0.4 0.2) (xy -0.4 0.6) (xy -0.9 0.6)) (layer F.Cu) (width 0))
+  (fp_poly (pts (xy -0.9 -0.6) (xy -0.4 -0.6) (xy -0.4 -0.2) (xy -0.9 -0.2)) (layer F.Cu) (width 0))
+  (pad 1 smd rect (at -1.3 0) (size 1 1.5) (layers F.Cu F.Mask)
+    (zone_connect 2))
   (pad 3 smd rect (at 1.3 0) (size 1 1.5) (layers F.Cu F.Mask))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5B39197B)
+(module SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm (layer F.Cu) (tedit 5C7452C1)
   (descr "SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip")
   (tags "solder jumper open")
   (attr virtual)
@@ -23,19 +23,8 @@
   (fp_arc (start 1.35 0.3) (end 1.35 1) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 0.3) (end -2.05 0.3) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 -0.3) (end -1.35 -1) (angle -90) (layer F.SilkS) (width 0.12))
-  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
-      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
-      (gr_poly (pts
-         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.6) (xy 0.9 -0.6) (xy 0.9 -0.2) (xy 0.4 -0.2)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 0.2) (xy 0.9 0.2) (xy 0.9 0.6) (xy 0.4 0.6)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.6) (xy -0.4 -0.6) (xy -0.4 -0.2) (xy -0.9 -0.2)) (layer F.Cu) (width 0))
+  (fp_poly (pts (xy -0.9 0.2) (xy -0.4 0.2) (xy -0.4 0.6) (xy -0.9 0.6)) (layer F.Cu) (width 0))
   (pad 3 smd custom (at 1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
     (zone_connect 2)
     (options (clearance outline) (anchor rect))
@@ -46,4 +35,13 @@
          (xy -0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy -0.55 0.75)) (width 0))
     ))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
+  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
+    (zone_connect 2)
+    (options (clearance outline) (anchor rect))
+    (primitives
+      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
+      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
+      (gr_poly (pts
+         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
+    ))
 )

Jumper.pretty/SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels.kicad_mod

@@ -1,4 +1,4 @@
-(module SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5B391A16)
+(module SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels (layer F.Cu) (tedit 5C7452E6)
   (descr "SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip, labeled with numbers")
   (tags "solder jumper open")
   (attr virtual)
@@ -26,19 +26,8 @@
   (fp_arc (start 1.35 0.3) (end 1.35 1) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 0.3) (end -2.05 0.3) (angle -90) (layer F.SilkS) (width 0.12))
   (fp_arc (start -1.35 -0.3) (end -1.35 -1) (angle -90) (layer F.SilkS) (width 0.12))
-  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
-    (zone_connect 2)
-    (options (clearance outline) (anchor rect))
-    (primitives
-      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
-      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
-      (gr_poly (pts
-         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 -0.6) (xy 0.9 -0.6) (xy 0.9 -0.2) (xy 0.4 -0.2)) (width 0))
-      (gr_poly (pts
-         (xy 0.4 0.2) (xy 0.9 0.2) (xy 0.9 0.6) (xy 0.4 0.6)) (width 0))
-    ))
+  (fp_poly (pts (xy -0.9 -0.6) (xy -0.4 -0.6) (xy -0.4 -0.2) (xy -0.9 -0.2)) (layer F.Cu) (width 0))
+  (fp_poly (pts (xy -0.9 0.2) (xy -0.4 0.2) (xy -0.4 0.6) (xy -0.9 0.6)) (layer F.Cu) (width 0))
   (pad 3 smd custom (at 1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
     (zone_connect 2)
     (options (clearance outline) (anchor rect))
@@ -49,4 +38,13 @@
          (xy -0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy -0.55 0.75)) (width 0))
     ))
   (pad 2 smd rect (at 0 0) (size 1 1.5) (layers F.Cu F.Mask))
+  (pad 1 smd custom (at -1.3 0) (size 1 0.5) (layers F.Cu F.Mask)
+    (zone_connect 2)
+    (options (clearance outline) (anchor rect))
+    (primitives
+      (gr_circle (center 0 0.25) (end 0.5 0.25) (width 0))
+      (gr_circle (center 0 -0.25) (end 0.5 -0.25) (width 0))
+      (gr_poly (pts
+         (xy 0.55 -0.75) (xy 0 -0.75) (xy 0 0.75) (xy 0.55 0.75)) (width 0))
+    ))
 )