* Added Omron B3FS tactile switch series.
Datasheet: https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf
* Added datasheet link to description field
* Added pin 1 location mark in silkscreen.
* Fixed courtyard to be 0.25mm away from the body
* Fixed silkscreen line thickness
The pads of this footprint are wrongly rotated by 90°. This means the pad size is off by 0.1 mm in each axis. This probably doesn't matter in practice, but still...
* Create footprint for C&K switch PTS125SM43SMTR2-LFS
This is a footprint for PTS125 series SMT switches from C&K. For example, this footprint is good for PTS125SM43SMTR2-LFS particular switch.
* Trying to solve travis indicated issues
* Adding tags
* Fix Fabrication Layer related errors on travis
Fabrication layer requirements
No drawings found on fabrication layer
Second Reference Designator missing
- Add RefDes to F.Fab layer with '%R'
* Fixing Travis error
Violating F5.2
Fabrication layer requirements
No drawings found on fabrication layer
* Fixing Travis error
Violating F9.3
3D model settings
3D model file path missing from the 3D model settings of the footprint
* Changes in F. CrtYard, F. Silks
Adopted good things from existing footprints of PTS645 and PTS810, so as to have a common design language.
* Fix Travis Error; Improve F. Silks
* Rename the footprint based on switch naming convention
* Remove file with old footprint name
* Added PSMTR at the end of current file name.
* Delete SW_Push_1P1T_NO_CK_PTS125.kicad_mod
Delete file with old name.
* Silk screen width changed to 0.12
* one silk line segment width was 0.15. Fixed it now.
* Looks like even though silk screen width standard is 0.12, the reference label of silk screen should have width of 0.15. Fixed that now.
* Again forgot to change width of one line segment of silk screen to 0.12. Now fixed at the source too.
* Center Ref Des for the F. Fab layer
* Changed file name as well as the footprint name
* Delete file with old name
As the footprint name has changed, the file name also need to change. This is taken care by deleting the file and adding new file with new file name. As part of last commit, I already added the new file, so now deleting the old file with this commit.
* Button_Switch_SMD: Add KSC7 button from CK switches
* Button_Switch_SMD: Add KSC6 from CK switches
* Button_Switch_SMD: Rename KSC6 and KSC7 buttons
* Button_Switch_SMD: Fix pad sie in KSC6 and KSC7 buttons
* Button_Switch_SMD: Fix circle size in KSC6 button
* Button_Switch_SMD: Fix silkscreen offset in KSC6 and KSC7
* Button_Switch_SMD: Fix courtyard in KSC6 and KSC7
* Button_Switch_SMD: Fix KSC button naming
* Button_Switch_SMD: Fix pad possitioning and courtyard in KSC devices
Since there are two different types of ALPS SKQG switch (with and
without stem) that require different 3D models, we need to have two
different footprints. This commit makes that split.
The outline has been cleaned up as well, after measuring the 3D model
from ALPS for dimensions missing in the drawing. The keep-out zones
have been added, and the courtyard has been made a bit tighter.
