Similar to the previous commit, the variable pointing to the directory
containing the 3D Models for the footprins also need to be updated to
KiCad8 since its versioned.
Even though KiCad8 can read older symbol files, this change is needed
to make future additions to the library easy to review.
KiCad8 introduced a new way of indenting. Even when changing just a
small text, that would result in a huge diff when saving the KiCad7 file
with KiCad8. Those diffs are hard to read making the life of the library
team difficult.
* Added Triwood RM065 potentiometer from old archive
* Removed 3dshape as it was not found anywhere
* Renamed file and removed bugs from travis
* Chaned name in silk layer and avoided collision silk layer with pad
* Removed typo in 3d model name
* Rotated footprint and removed clutter in the center
* Moved footprint such that pin 1 is in origin
* Renamed FP to Runtron and made minor modifications
- Changed order of pin numbers to be consistent with symbol library
- Positioned all pins in metric space
- Added clearance of silkscreen on all pins according to http://kicad-pcb.org/libraries/klc/F5.1/ sentence 2
* Added vertical version of Runtron potentiometer
* Adopted 3d model name after warning in Travis
* Turned fps to have 1st pin in upper left corner after reordering of pins
* Exchanged horizontal and vertical types in description
* Corrections according to @evanshultz comments
- Changed tags horizontal and vertical of both components
- Redrawn Fab layer (reduction of lines and correct measurements according to Runtron datasheet + some approximations from drawings)
- Adopted Silk layer to reflect the changes
- Adopted countyard
- Rotated all pins to rotation 0
* Increased silkscreen line width to 0.12mm
* Reduced the size of the pads to get 0.4mm annular ring size
* Updated parts according to suggestions from @evanshultz
Silk Front is almost 0.12mm all around
Pad diameter set to 1.55mm
Resized the FFab layer to reflect correct size (3.8 instead of 4mm) (vertical)
Remove bevels, use arc where appropriate
Reduces knob diameter in FFab (vertical)
Reworked sizes in horizontal case
* Adresses issues by evanshultz
Realigned courtyard
Adding some silk lines
Checked some sizes and adopted some measurements
Offsetted silk layers outside of fab layers
* Realigned countyards
* Moved Countyards by 0.02mm inside to have clearance between outside of Pad/Fab and center of countyard.
* Adopted Courtyard to correct clearance to middle of Fab line
* Solder pad ring is too small for hand soldering
Increase from 1.26 to 1.75
* Create Potentiometer_Bourns_3339P_Vertical_HandSoldering.kicad_mod
* revert original file, for machine soldering
* restore original content
* remove newline
* Update Potentiometer_Bourns_3339P_Vertical_HandSoldering.kicad_mod
* Add datasheet to description.
* Use triangle as pin 1 indicator instead of line.
* Decrease annular ring for pins 1, 2, and 3.
* Indicate travel on silkscreen, and screw holes on fab.
