mirror of
https://github.com/oresat/oresat-star-tracker-hardware.git
synced 2025-12-22 05:25:24 +00:00
8 lines
373 B
Plaintext
8 lines
373 B
Plaintext
- tie USB VB to 5v
|
|
- tie USB ID to gnd
|
|
- add optional pullups to i2c bus
|
|
- breakout points on CAN transciever should by 2.54mm spacing
|
|
- label signals on solder jumpers on bottom.
|
|
- pull(up/down) resistors on the control signal jumpers so when they are connected to the beagle they don't accidentally shorts pins to VCC or GND
|
|
- add GND pin on parallel bus breakout header
|