AllSpiceMirrors/parallella-hw
7
Fork 0
mirror of https://github.com/parallella/parallella-hw.git synced 2025-04-22 19:33:42 +00:00
Files Issues Releases Activity

Adding reference material for AD9523 evaluation board/reference setup

Browse Source
This commit is contained in:
Andreas Olofsson 2018-01-27 09:20:49 -05:00
parent 54b9a3ba55
commit 5cb00197de
7 changed files with 12 additions and 0 deletions

BIN
meta_carrier/docs/datasheets/AD9523/AD9523-1_ASY.pdf Normal file
View File

Note: AllSpice cannot diff pdf files. Rendering head (latest) version below.
View File

BIN
meta_carrier/docs/datasheets/AD9523/AD9523-1_Gerber.ZIP Normal file
View File

Binary file not shown.

BIN
meta_carrier/docs/datasheets/AD9523/AD9523-1_Layout.zip Normal file
View File

Binary file not shown.

BIN
meta_carrier/docs/datasheets/AD9523/AD9523-1_Schematic.pdf Normal file
View File

Note: AllSpice cannot diff pdf files. Rendering head (latest) version below.
View File

BIN
meta_carrier/docs/datasheets/AD9523/AD9523-1_datasheet.pdf Normal file
View File

Note: AllSpice cannot diff pdf files. Rendering head (latest) version below.
View File

BIN
meta_carrier/docs/datasheets/AD9523/AD9523-1_userguide.pdf Normal file
View File

Note: AllSpice cannot diff pdf files. Rendering head (latest) version below.
View File

12
meta_carrier/docs/datasheets/AD9523/README.md Normal file
View File

@ -0,0 +1,12 @@
1. Connect a 6V (??!!!) supply and the USB cable to a PC
1. Start up the ADI clock generator software in Windows
2. Set the REF_A input in single ended mode
Set the input clock setting to X
Set the output as single ended
3. Feed REF_A (J9) with a 3.3V single ended sinusoid from a singnal generator,
at a frequency of x Mhz
4. Observe output X with an oscilloscope
5. Burn settings into a flash?