SATA Backplane PCB for 2 disk with 3.5mm spaced

kicad

Go to file

Alex 642ec4f039 Update docs with V1.0 production		2023-04-26 12:48:17 +02:00
docs	Update docs with V1.0 production	2023-04-26 12:48:17 +02:00
libs	Update connectors with V1.0 experience	2023-04-26 12:45:33 +02:00
.gitignore	Update docs with V1.0 production	2023-04-26 12:48:17 +02:00
README.md	Update docs with V1.0 production	2023-04-26 12:48:17 +02:00
fp-lib-table	Initial commit with first revision	2023-01-01 16:26:16 +01:00
sata-backplane.kicad_pcb	Update connectors with V1.0 experience	2023-04-26 12:45:33 +02:00
sata-backplane.kicad_pro	Update connectors with V1.0 experience	2023-04-26 12:45:33 +02:00
sata-backplane.kicad_sch	Initial commit with first revision	2023-01-01 16:26:16 +01:00
sym-lib-table	Initial commit with first revision	2023-01-01 16:26:16 +01:00

SATA Backplane

This backplane is used to rotate the SATA data connector to 90° in order to help mouting hard drive into Fractal Node 804.

The hard drives have 3.5mm between them.

The bom can be found in the docs directory.

V1.0 Production

The V1.0 has been produced by JLCPCB, tested and working very well.

Here's some photos of the result: