Linus Torvalds dcb8b833e3 minimal pcb: set board thickness explicitly in kicad_pcb ...

I don't usually bother with setting up that kind of board stackup detail
since it doesn't really matter for the kinds of things I do, and I might
pick the board thickness pretty much randomly at order time.

But for this board the thickness actually matters a bit due to the
mid-mount USB connector: I use the one for a 1.6mm board and if I were
to pick some other thickness I should use a slightly different part
number.

There's also a slight secondary reason to explicitly set the FR4
thickness in the pcb: now that I have all the 3D models for the
components, I can export the whole board as a step file from kicad.
Which is potentially useful as a verification of the enclosure.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2026-09-13 09:31:00 -07:00

28291 lines

871 KiB

Plaintext

Pointer Snippet

Raw Permalink Blame History