Changed footprint to 8 pin version. #82

Open

ing-kuczmik wants to merge 2 commits from ing-kuczmik/bug_JST_SM08B into master

ing-kuczmik commented

2020-11-03 10:47:16 +00:00

(Migrated from github.com)

As described in Issue: JST Connector SM08B-SURS-TF(LF)(SN) #81

msamy0 commented

2020-11-18 02:48:59 +00:00

(Migrated from github.com)

Thanks for your contribution
I know you have just edited the premade 7-pins foot print and extended it to a 8-Pins one, however another edits is required

Mech.15 outer lines should be 0.05mm width
Mech.15 origin + mark should be in 0.1 line width
3D model should lay in the Mech.1 Layer
Mech.13 layer should have a contour around the 3d model projection like this

Thanks for your contribution I know you have just edited the premade 7-pins foot print and extended it to a 8-Pins one, however another edits is required - Mech.15 outer lines should be 0.05mm width - Mech.15 origin + mark should be in 0.1 line width - 3D model should lay in the Mech.1 Layer - Mech.13 layer should have a contour around the 3d model projection like this ![image](https://user-images.githubusercontent.com/64434690/99476489-4f0cd000-2959-11eb-8c3f-53726c8bc862.png)

ing-kuczmik commented

2020-11-18 08:32:48 +00:00

(Migrated from github.com)

Hey, i correct the footprint to the celestial rules. Because I first grap the wrong footprint the BM08B Version is also corrected.

msamy0 commented

2020-11-18 09:29:01 +00:00

(Migrated from github.com)

Okay, nice !
both will be merged soon, thanks !

Okay, nice ! both will be merged soon, **thanks** !

This design review can be merged automatically.

You are not authorized to merge this design review.

View command line instructions.