AllSpiceMirrors/incutec-OpenRemoteID
0
Fork 0
mirror of https://github.com/incutec-hw/OpenRemoteID.git synced 2026-09-02 02:33:58 +00:00
Files Issues Projects Releases
Files
main
incutec-OpenRemoteID/README.md
JustStan 8dcbfdcecd docs: correct OpenRemoteID public design status
2026-09-01 12:18:39 +02:00

1.4 KiB
Raw Permalink Blame History

OpenRemoteID

Open hardware for a standalone broadcast Remote ID module built around an ESP32-C3-MINI-1 radio module and an ATGM336H GNSS receiver.

Status

This repository is an incomplete hardware concept, not a compliant or released product. The KiCad schematic contains six placed devices and currently reports 85 ERC errors. The two-layer PCB contains the same six footprints and no routed tracks, vias or copper zones. No firmware is present.

The intended interfaces are 5 V power, ground, UART RX/TX, a GNSS antenna on U.FL, a status LED and a push button. See hardware/DESIGN.md for the boundary between checked-in design facts and design intent.

Repository

  • hardware/OpenRemoteID.kicad_sch: incomplete schematic
  • hardware/OpenRemoteID.kicad_pcb: incomplete two-layer placement
  • hardware/lib.kicad_sym, hardware/lib.pretty/, hardware/lib.3dshapes/: project-local libraries
  • hardware/datasheets/: component datasheets
  • research/: market research; it is reference material, not product evidence

Regulatory position

ASTM F3411 and EN 4709-002 are design targets only. This repository contains no completed firmware, conformity assessment, declaration, radio test report or authority acceptance for this product. Certification or modular approval of a component does not by itself certify the finished product.

License

Hardware is licensed under CERN-OHL-S-2.0.