You've already forked incutec-OpenRemoteID
mirror of
https://github.com/incutec-hw/OpenRemoteID.git
synced 2026-09-03 02:42:37 +00:00
36 lines
1.4 KiB
Markdown
36 lines
1.4 KiB
Markdown
# OpenRemoteID
|
|
|
|
Open hardware for a standalone broadcast Remote ID module built around an
|
|
ESP32-C3-MINI-1 radio module and an ATGM336H GNSS receiver.
|
|
|
|
## Status
|
|
|
|
This repository is an incomplete hardware concept, not a compliant or released
|
|
product. The KiCad schematic contains six placed devices and currently reports
|
|
85 ERC errors. The two-layer PCB contains the same six footprints and no routed
|
|
tracks, vias or copper zones. No firmware is present.
|
|
|
|
The intended interfaces are 5 V power, ground, UART RX/TX, a GNSS antenna on
|
|
U.FL, a status LED and a push button. See [hardware/DESIGN.md](hardware/DESIGN.md)
|
|
for the boundary between checked-in design facts and design intent.
|
|
|
|
## Repository
|
|
|
|
- `hardware/OpenRemoteID.kicad_sch`: incomplete schematic
|
|
- `hardware/OpenRemoteID.kicad_pcb`: incomplete two-layer placement
|
|
- `hardware/lib.kicad_sym`, `hardware/lib.pretty/`, `hardware/lib.3dshapes/`:
|
|
project-local libraries
|
|
- `hardware/datasheets/`: component datasheets
|
|
- `research/`: market research; it is reference material, not product evidence
|
|
|
|
## Regulatory position
|
|
|
|
ASTM F3411 and EN 4709-002 are design targets only. This repository contains no
|
|
completed firmware, conformity assessment, declaration, radio test report or
|
|
authority acceptance for this product. Certification or modular approval of a
|
|
component does not by itself certify the finished product.
|
|
|
|
## License
|
|
|
|
Hardware is licensed under [CERN-OHL-S-2.0](LICENSE).
|