mirror of
https://gitlab.com/kicad/libraries/kicad-footprints.git
synced 2025-04-14 00:29:15 +00:00
Official KiCad Footprint Libraries for KiCad
96e8072d8e
* Add 6.35mm and speakON connectors * Add Neutrik XLR connectors * Add NJx 6.35mm jacks * Push the last two XLR connectors Confirmed with Neutrik their dimensions/style * Fix copy/paste error on NC4FBV * Correct width of M series back end * Initial review fixes - NMJ4HCD2: link and description fixed - NRJ6HM-1-AU like NRJ6HM-1 - Move NSJ12* pins S2 and SN2 to correct location - NSJ8*/NSJ12* nose diameter to 8.95mm * Change G pins on NSJ8/NSJ12 to 2.9mm pad * NRJ6HM-1: "SN" pin to "S" * Correct pin names for HM-1 jacks * Shrink pads slightly for clearance * Add Jack_XLR-6.35mm_Neutrik_NCJ6FA-H-DA_Horizontal And fix description of other NCJ6FA-H* footprints * URL and description fixes for NCJ6FA-V * Fix NCJ6FA-H* pin 1position * Shrink annular rings on 3mm pads 1.2mm drill holes had with 3mm pad diameter changed to 2.9mm diameter for greater pad-to-pad clearance (at least 0.2mm) * Delete duplicate elements * Jack_XLR_Neutrik_NC5MBV-B_Vertical cleanup Remove extraneous and nearly-overlapping arcs (just slightly offset or buried under "correct" arcs) * Jack_XLR_Neutrik_NC5MAV-SW_Vertical close courtyard * Correct location of NC3FAHR mounting holes * Fix NC3FAV right-side courtyard location * Fix NC5MAV pad 5 location * Fixed NC5MAV-SW pad 5 and N locations * Fix/update AA series - Remove G pad from NC3FAAH1 - Fix bottom fab outline width on NC3MAAH - Fix G pad location on NC3MAAV - Align line ordering in NC3FAAV files * speakON chassis fixes - Correct NL*MD-H body length - NL4MD-V-1 screw holes reversed * Fix speakON combo - NLJ2MD-V add NPTHs - Fix body width of NLJ2MD-H * Fix vertical speakON courtyard offset to 0.5mm * Fix B series - NC3FBH2 / NC3FBH2-B: Correct body depth due to datasheet mistake - NC3MBV*: Align line ordering - NC5FBV-B: Delete duplicate fab arc - NC5MBV / NC5MBV-B: Aligned line ordering and improved bottom right fab arc * Fix flange thickness (7.5mm) on NC4 footprints * Fix flange thickness (6.3mm) on NC5MAH * Fix flange thickness (6.5mm) on NC5FAH * Fix flange thickness (7.5mm) on NC5FBH * Fix flange thickness (7.5mm) on NC5MBH * Fix flange thickness (6.35mm) on NC3M[A|AA|B]H - Did not touch *L or *R footprints yet because the datasheet indicates the cutout wouldn't support a 6.35mm flange. * Fix flange thickness (6.5mm) on NC3F[A|AA|B]H - Did not touch *L or *R footprints yet because the datasheet indicates the cutout wouldn't support a 6.5mm flange * Fix flange thickness (5.0mm) on NC3[F|M]AH[L|R]* * Change *L and *R cutouts to Edge.Cuts layer * Make NC3M*H footprints 18.2mm wide - Also fixed a few more of the *L and *R parts that didn't have the cutout on the Edge.Cuts layer and didn't have a 5mm flage depth * Make NC3F*H footprints 21.5mm wide - Also fixed NC3FBHL1 that didn't have the cutout on the Edge.Cuts layer and didn't have a 5mm flage depth * NC4: F body width to 22.1mm and M to 18.5mm * NC5: Update body widths * Minor fixes - NC5*AH: Update to 12.5/12.8mm flange side widths. - Center NC3MAAH flange terminal cup end. * NCJ6FA-H body update * NC3FAAH* and NC3M[A|B]H[L|R] body update * NC3F[A|B]H body update * NC3M[AA|B]H body update * NC3MAH body update * NC[4|5]M body update * NC[4|5]F body update * NC3FAHR body update * NC3F[A|B]HL body updates * NCJ6FA-H cup depth to 11.45mm * Correct NC3FAHR-0 errors * Fix FAHL/FAHR/FBHL body dimensions * Correct F[A|B]H[L|R] body outline * Fixes to NC5 footprints |
||
|---|---|---|
| .github | ||
| Battery.pretty | ||
| Button_Switch_Keyboard.pretty | ||
| Button_Switch_SMD.pretty | ||
| Button_Switch_THT.pretty | ||
| Buzzer_Beeper.pretty | ||
| Calibration_Scale.pretty | ||
| Capacitor_SMD.pretty | ||
| Capacitor_Tantalum_SMD.pretty | ||
| Capacitor_THT.pretty | ||
| CMakeModules | ||
| Connector_AMASS.pretty | ||
| Connector_Amphenol.pretty | ||
| Connector_Audio.pretty | ||
| Connector_BarrelJack.pretty | ||
| Connector_Card.pretty | ||
| Connector_Coaxial.pretty | ||
| Connector_DIN.pretty | ||
| Connector_Dsub.pretty | ||
| Connector_FFC-FPC.pretty | ||
| Connector_Harwin.pretty | ||
| Connector_HDMI.pretty | ||
| Connector_Hirose.pretty | ||
| Connector_IDC.pretty | ||
| Connector_JAE.pretty | ||
| Connector_JST.pretty | ||
| Connector_Molex.pretty | ||
| Connector_Multicomp.pretty | ||
| Connector_PCBEdge.pretty | ||
| Connector_Phoenix_GMSTB.pretty | ||
| Connector_Phoenix_MC_HighVoltage.pretty | ||
| Connector_Phoenix_MC.pretty | ||
| Connector_Phoenix_MSTB.pretty | ||
| Connector_Pin.pretty | ||
| Connector_PinHeader_1.00mm.pretty | ||
| Connector_PinHeader_1.27mm.pretty | ||
| Connector_PinHeader_2.00mm.pretty | ||
| Connector_PinHeader_2.54mm.pretty | ||
| Connector_PinSocket_1.00mm.pretty | ||
| Connector_PinSocket_1.27mm.pretty | ||
| Connector_PinSocket_2.00mm.pretty | ||
| Connector_PinSocket_2.54mm.pretty | ||
| Connector_RJ.pretty | ||
| Connector_Samtec_HLE_SMD.pretty | ||
| Connector_Samtec_HLE_THT.pretty | ||
| Connector_Samtec.pretty | ||
| Connector_SATA_SAS.pretty | ||
| Connector_Stocko.pretty | ||
| Connector_TE-Connectivity.pretty | ||
| Connector_USB.pretty | ||
| Connector_Wago.pretty | ||
| Connector_Wire.pretty | ||
| Connector_Wuerth.pretty | ||
| Connector.pretty | ||
| Converter_ACDC.pretty | ||
| Converter_DCDC.pretty | ||
| Crystal.pretty | ||
| Diode_SMD.pretty | ||
| Diode_THT.pretty | ||
| Display_7Segment.pretty | ||
| Display.pretty | ||
| Ferrite_THT.pretty | ||
| Fiducial.pretty | ||
| Filter.pretty | ||
| Fuse.pretty | ||
| Heatsink.pretty | ||
| Inductor_SMD.pretty | ||
| Inductor_THT.pretty | ||
| Jumper.pretty | ||
| LED_SMD.pretty | ||
| LED_THT.pretty | ||
| Module.pretty | ||
| Mounting_Wuerth.pretty | ||
| MountingEquipment.pretty | ||
| MountingHole.pretty | ||
| NetTie.pretty | ||
| Obsolete/Fiducial | ||
| OptoDevice.pretty | ||
| Oscillator.pretty | ||
| Package_BGA.pretty | ||
| Package_CSP.pretty | ||
| Package_DFN_QFN.pretty | ||
| Package_DIP.pretty | ||
| Package_DirectFET.pretty | ||
| Package_LCC.pretty | ||
| Package_LGA.pretty | ||
| Package_QFP.pretty | ||
| Package_SIP.pretty | ||
| Package_SO_J-Lead.pretty | ||
| Package_SO.pretty | ||
| Package_SON.pretty | ||
| Package_TO_SOT_SMD.pretty | ||
| Package_TO_SOT_THT.pretty | ||
| Potentiometer_SMD.pretty | ||
| Potentiometer_THT.pretty | ||
| Relay_SMD.pretty | ||
| Relay_THT.pretty | ||
| Resistor_SMD.pretty | ||
| Resistor_THT.pretty | ||
| RF_Antenna.pretty | ||
| RF_Converter.pretty | ||
| RF_GPS.pretty | ||
| RF_GSM.pretty | ||
| RF_Mini-Circuits.pretty | ||
| RF_Module.pretty | ||
| RF_Shielding.pretty | ||
| RF_WiFi.pretty | ||
| RF.pretty | ||
| Rotary_Encoder.pretty | ||
| Sensor_Audio.pretty | ||
| Sensor_Current.pretty | ||
| Sensor_Distance.pretty | ||
| Sensor_Humidity.pretty | ||
| Sensor_Motion.pretty | ||
| Sensor_Pressure.pretty | ||
| Sensor_Voltage.pretty | ||
| Sensor.pretty | ||
| Socket.pretty | ||
| Sources | ||
| Symbol.pretty | ||
| TerminalBlock_4Ucon.pretty | ||
| TerminalBlock_Altech.pretty | ||
| TerminalBlock_Dinkle.pretty | ||
| TerminalBlock_MetzConnect.pretty | ||
| TerminalBlock_Philmore.pretty | ||
| TerminalBlock_Phoenix.pretty | ||
| TerminalBlock_RND.pretty | ||
| TerminalBlock_TE-Connectivity.pretty | ||
| TerminalBlock_WAGO.pretty | ||
| TerminalBlock.pretty | ||
| TestPoint.pretty | ||
| Transformer_SMD.pretty | ||
| Transformer_THT.pretty | ||
| Valve.pretty | ||
| Varistor.pretty | ||
| .gitattributes | ||
| .gitignore | ||
| .travis.yml | ||
| CMakeLists.txt | ||
| CONTRIBUTING.md | ||
| fp-lib-table | ||
| LICENSE.md | ||
| README.md | ||
| TODO.md | ||
KiCad Footprint Libraries
This repository contains the official KiCad footprint libraries.
The libraries in this repository are intended to be used with KiCad version 5 or with a nightly that supports rounded rectangle and polygon pads.
Each footprint library is stored as a directory with the .pretty suffix. The footprint files are .kicad_mod files within
Weekly builds can be found at https://kicad.github.io/footprints
Contribution guidelines can be found at http://kicad-pcb.org/libraries/contribute The library convention can be found at http://kicad-pcb.org/libraries/klc/
Other KiCad library repositories are located:
- Symbols: https://github.com/kicad/kicad-symbols
- 3D Models: https://github.com/kicad/kicad-packages3d
- Templates: https://github.com/kicad/kicad-templates