Linus Torvalds 17e8884d31 Update the usb-stomp parts selection in the schematic ...

This updates the 0201 parts to 0402 sizes, because the 0201 sizing was
just inconvenient and caused problems with the (failed) flex board trial
too.  The board has plenty of space, the 0201 sizing was to make it
easier to route all the traces out of the RP2354, but it's not like I
use all the GPIOs anyway.

So let's re-route for a saner component choice.

The actual noticeable change comes from also picking a larger 4.7uF
capacitor on the input path to help improve the bass response into the
codec further. The -3 dB point should now be below 10Hz.

The actual PCB changes next.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

2026-08-13 07:47:58 -07:00

5694 lines

94 KiB

Plaintext

Pointer Snippet

Raw Permalink Blame History