Daniel Lindmark

daniel-allspice commented on design review AllSpice-Demos/KiCAD-Demo#8

2024-10-17 03:01:10 +00:00

@PavelInPurchasing, it's been removed { diff="AllSpice-Demos/KiCAD-Demo:8a26e4d6dbeb69a5cd3cbba54807ba080ccb3192...4d8a762fe08925f5f8fa254d91605e36e96f5f…

daniel-allspice released V4 at AllSpice-Demos/Altium-Demo

2024-07-28 23:54:23 +00:00

daniel-allspice pushed tag V4 to AllSpice-Demos/Altium-Demo

2024-07-28 23:54:22 +00:00

daniel-allspice pushed tag V3 to AllSpice-Demos/Altium-Demo

2024-07-28 23:50:55 +00:00

daniel-allspice commented on issue AllSpice-Demos/Altium-Demo#6

2024-07-28 23:47:05 +00:00

Check SERCOM between V2-V4. Check for MOSI/MISO Swaps

Verified. Fixed in V3 and no changes to V4

daniel-allspice closed issue AllSpice-Demos/Altium-Demo#6

2024-07-28 23:46:52 +00:00

Check SERCOM between V2-V4. Check for MOSI/MISO Swaps

daniel-allspice opened issue AllSpice-Demos/Altium-Demo#6

2024-07-28 23:46:31 +00:00

Check SERCOM between V2-V4. Check for MOSI/MISO Swaps

daniel-allspice opened issue AllSpice-Demos/Altium-Demo#5

2024-07-28 23:45:33 +00:00

Verify debug header removal

daniel-allspice pushed to dd/layout_notes at McRaeAlex/badge

2023-11-13 03:18:29 +00:00

daniel-allspice created branch dd/layout_notes in McRaeAlex/badge

2023-11-13 03:18:29 +00:00

daniel-allspice commented on design review McRaeAlex/badge#1

2023-11-10 17:27:56 +00:00

added silk screen

@McRaeAlex, you should be able to print the silkscreen up to the edge.

The reason copper can't go to the edge, is when you cut the edge of the board, the copper can short to internal layers.

…

daniel-allspice approved McRaeAlex/badge#1

2023-11-10 16:27:59 +00:00

added silk screen

@allspiceuser said everything I'd like to. Do what they said.