AllSpice/ArchimajorDemo
Archived
26
Fork 0
Files Issues 8 Design Reviews 2 Projects Releases 3 Activity

develop #30

Closed
allspice-kyle wants to merge 3 commits from develop into main
pull from: develop
merge into: AllSpice:main
Conversation 0 Commits 3 Files Changed 2
allspice-kyle commented 2023-08-09 16:20:39 +00:00
Owner
Copy Link

This short description prepends any pull request. It is fully markdown compatible. See markdown guide for examples of what you can do!

Resolved Issues

...

Description

...

Design Review Checklist

Process

  • Commits in correct branch
  • Schematic and PCB file names follow standard
  • Export necessary review files (3D model, BOM, etc.)
  • Update relevant system architecture documents
  • Update project README page
  • Simulations uploaded and outputs explained

System

  • Power
    • Sufficient power supplied from upstream source
    • Supply rated for necessary country specifications
    • Estimated total worst-case power supply draw
  • Connectors
    • I/Os are specified
    • Sufficient Current and Voltage rating
    • Mating connectors have matching pinout
    • Same contact material specified for mating connectors
  • Testing
    • Test procedure written
  • Environmental
    • Specified min/max operating temperature
    • Specified min/max storage temperature
    • Specified min/max humidity
  • ROHS compliance requirement review

Components

  • Unpopulated components are denoted DNI
  • Components meet environmental specifications
  • All components have quantity, reference designator and description
  • Suggested and alternate manufacturers listed

Schematics

  • Document
    • Dot on each connection
    • No four-point connections
    • Title block completed for each sheet
    • All components have reference designators and values
    • Multi-part components don't have unplaced symbols
    • Page title present and consistent on all pages if not in title block
    • Symbols identify open collector/drain pins and internal pulled up/down pins
    • Pin names and attributes on symbols with multi-function pins should match actual design usage (I/O/Bi, Name)
    • Components follow preferred reference designator pattern
  • External I/O
    • Filtered for EMI
    • Protected against electrostatic discharge (ESD)
    • Unused inputs terminated
  • Microcontrollers / ICs
    • Predictable or controlled power-up state
      • Reset filtered
    • Sufficient bypass capacitance
    • Oscillators checked for reliable startup
    • Pullups on open-collector pins
    • Logic-low and logic-high voltage levels checked
    • No-connect pins labeled NC
    • Clock lines with series termination and parallel termination component locations present even if not populated; zero ohm resistor for series, unpopulated parts for parallel termination
    • Check for input voltages applied with power off and CMOS latchup possibilities
    • Check the data sheet errata and apnotes for weird IC behaviors
  • Busses
    • UART/USART TX->RX and RX<-TX
    • I2C SDA and SCL pullup with appropriate value per capacitance
    • Setup, hold, access times for data and address busses
  • Analog
    • Sufficient power rails for analog circuits
    • Amplifiers checked for stability
    • Consider signal rate-of-rise and fall for noise radiation
  • General
    • Sufficient bulk capacitance calculated
    • Polarized components checked
    • Electrolytic/tantalum capacitors checked for no reverse voltage
    • Electrolytic/tantalum capacitors temperature/voltage derating sufficient for MTBF
    • Sufficient capacitance on low dropout voltage regulators
    • Sufficient time delays and slew rates for comparators
    • Sufficient common mode input voltage rating on opamps
    • Check pin numbers of all custom-generated parts
    • Check reverse base-emitter current/voltage on bipolar transistors
    • Power nets use preferred and consistent naming (ex. no 3.3V vs +3.3V)
    • Debug resources added by design (leds, serial ports, etc.) even if unpopulated by default
*This short description prepends any pull request. It is fully markdown compatible. See [markdown guide](https://www.markdownguide.org/cheat-sheet/) for examples of what you can do!* ## Resolved Issues <!-- Include any relevant issues closed by this pull request. Use the form "Closes #<number of issue>" --> ... ## Description <!-- Include a description for this design review. What is the primary purpose? What will be the status of this design after approval? --> ... ## Design Review Checklist ### Process - [x] Commits in correct branch - [x] Schematic and PCB file names follow standard - [x] Export necessary review files (3D model, BOM, etc.) - [x] Update relevant system architecture documents - [ ] Update project README page - [ ] Simulations uploaded and outputs explained ### System - [ ] Power - [ ] Sufficient power supplied from upstream source - [ ] Supply rated for necessary country specifications - [ ] Estimated total worst-case power supply draw - [ ] Connectors - [ ] I/Os are specified - [ ] Sufficient Current and Voltage rating - [ ] Mating connectors have matching pinout - [ ] Same contact material specified for mating connectors - [ ] Testing - [ ] Test procedure written - [ ] Environmental - [ ] Specified min/max operating temperature - [ ] Specified min/max storage temperature - [ ] Specified min/max humidity - [ ] ROHS compliance requirement review ### Components - [ ] Unpopulated components are denoted DNI - [ ] Components meet environmental specifications - [ ] All components have quantity, reference designator and description - [ ] Suggested and alternate manufacturers listed ### Schematics - [ ] Document - [ ] Dot on each connection - [ ] No four-point connections - [ ] Title block completed for each sheet - [ ] All components have reference designators and values - [ ] Multi-part components don't have unplaced symbols - [ ] Page title present and consistent on all pages if not in title block - [ ] Symbols identify open collector/drain pins and internal pulled up/down pins - [ ] Pin names and attributes on symbols with multi-function pins should match actual design usage (I/O/Bi, Name) - [ ] Components follow preferred reference designator pattern <!-- Link to spec --> - [ ] External I/O - [ ] Filtered for EMI - [ ] Protected against electrostatic discharge (ESD) - [ ] Unused inputs terminated - [ ] Microcontrollers / ICs - [ ] Predictable or controlled power-up state - [ ] Reset filtered - [ ] Sufficient bypass capacitance - [ ] Oscillators checked for reliable startup - [ ] Pullups on open-collector pins - [ ] Logic-low and logic-high voltage levels checked - [ ] No-connect pins labeled NC - [ ] Clock lines with series termination and parallel termination component locations present even if not populated; zero ohm resistor for series, unpopulated parts for parallel termination - [ ] Check for input voltages applied with power off and CMOS latchup possibilities - [ ] Check the data sheet errata and apnotes for weird IC behaviors - [ ] Busses - [ ] UART/USART TX->RX and RX<-TX - [ ] I2C SDA and SCL pullup with appropriate value [per capacitance](https://www.ti.com/lit/an/slva689/slva689.pdf) - [ ] Setup, hold, access times for data and address busses - [ ] Analog - [ ] Sufficient power rails for analog circuits - [ ] Amplifiers checked for stability - [ ] Consider signal rate-of-rise and fall for noise radiation - [ ] General - [ ] Sufficient bulk capacitance calculated - [ ] Polarized components checked - [ ] Electrolytic/tantalum capacitors checked for no reverse voltage - [ ] Electrolytic/tantalum capacitors temperature/voltage derating sufficient for MTBF - [ ] Sufficient capacitance on low dropout voltage regulators - [ ] Sufficient time delays and slew rates for comparators - [ ] Sufficient common mode input voltage rating on opamps - [ ] Check pin numbers of all custom-generated parts - [ ] Check reverse base-emitter current/voltage on bipolar transistors - [ ] Power nets use preferred and consistent naming (ex. no `3.3V` vs `+3.3V`) - [ ] Debug resources added by design (leds, serial ports, etc.) even if unpopulated by default
allspice-kyle added 3 commits 2023-08-09 16:20:39 +00:00
allspice-kyle closed this pull request 2023-08-09 16:21:40 +00:00
This repo is archived. You cannot comment on pull requests.
Reviewers
No reviewers
Labels
Clear labels   
1 - idea

Nice to have or idea to capture

  
2 - low

Should be resolved eventually

  
3 - medium

Should be resolved before product launch

  
4 - high

Should be resolved before next release

  
5 - critical

Must be fixed immediately - blocking item

  
bug

Something doesn't work

  
dfm

Design for manufacturing consideration

  
documentation

Improvements to supporting documentation

  
eol

End of life component

  
feature

New feature or request

  
firmware

Requires FW attention

  
layout

Requires PCB layout attention

  
mechanical

Requires ME attention

No Label
1 - idea
2 - low
3 - medium
4 - high
5 - critical
bug
dfm
documentation
eol
feature
firmware
layout
mechanical
Milestone
Clear milestone
No items
No Milestone
Projects
Clear projects
No project
Assignees
Clear assignees
No Assignees
1 Participants
Due Date
The due date is invalid or out of range. Please use the format 'yyyy-mm-dd'.

No due date set.

Dependencies

No dependencies set.

Reference: AllSpice/ArchimajorDemo#30
No description provided.
Delete Branch "develop"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?