Tubii_Tk2/Parts/phys_parts/log
2015-02-27 19:09:38 -05:00

208 lines
6.4 KiB
Plaintext

11-14-2002 tsk: Release 15.0-a002
- The following PCR fixed
474160: added a new file for dsize.dra and dsize.psm
as provided by the requester.
- Uprev'ed all symbols to 15.0 level.
11-07-2001 tsk : Release 14.2
- The following pcrs fixed.
409109: add 2 fsm files to pcb_lib in 14.2
Added fsm and dra symbols: ab00 and ab85.
09-08-2000 tsk : Release 14.0
- The following pcrs fixed.
233639:Mismatch in chips and footprints in pin manes for some parts
335658:Missing pins and Extra pins
Added new footrints: pga84_sq soj26_26 soj26_24 tsop26_24
03-12-1999 tsk : Release 13.6
- Added template/sym_template.dra
- The following pcrs fixed.
233640:Added new footrints
clcc344 lcc32 soj20
dip20 mquad28 sop44
dip28 pqfp52 ssop56
dip42_6 pqfp80 tqfp32
Added the pad: smd85rec13.pad
245094:Corrected sha_sot89 and sha_sot89msk ssn files and
updated smd162by68.pad
12-3-1997 tsk : Release 12.1
- The following pcrs fixed.
190433:Added Thermal relief and Anti-pad information to inner
layer of pads.
206052:Corrected the origin of SOIC20 to lie within the body.
12-3-1996 tsk : Release 12.0 P1
Following are the updates done in this release:
- The following new symbols have been added.
dip28_4 pga108 soj42 tsop26_3 tssop20
dip32_3 pqfp100 sol20 tsop28_4 tssop24
dip36_6 soic28 sop24 tsop32_4 zip40
dip52_9 soic32w ssop14 tsop40_4
dip58_6 soj26_20 ssop16 tsop50_4
dip64_3 soj32 ssop20 tssop14
flat64 soj36 ssop24 tssop16
- The following pcrs fixed.
149209 PLCC and LCCS - bad padstack rotations
170319 CAP400 symbol is wrong size
173162 Allegro symbol sot23 has pins 1 and 2 swapped
174776 soic symbols built incorrectly
87055 pad smd162by68 missing from library in SUN platform
106003 Need SOL16 footprint
03-21-1995 Yuet Wen : Release 10.1 P1
- A single Allegro symbol library, algroLib, is released in 10.1.
This release also includes the contents of past allegrolib.
allegrolib is put to end of life.
09-21-94 pk : Release 10.0 P1
Following are the updates done in this release:
- All the files have been uprev'ed to 10.0.
04-15-94 ldang/pk : Release 8.1 P1
Following are the updates done in this release:
- The following new symbols have been added.
CLCC28 CLCC44 CLCC68 CLCC84 CPGA100_X
CPGA132 CPGA160_X CPGA175 CPGA191_X CPGA192_X
CPGA207 CPGA208 CPGA262 CPGA68 CPGA69
CPGA84_X CPGA85_X CQFP100 CQFP132 CQFP164
CQFP208_ALT CQFP44_AMD CQFP64_IDT CQFP68_L CQFP84
DIP28_4_AMD DIP64_9 FLAT48 FLAT56 LCC52
LCC68 PGA108_BIT PGA125 PGA144 PGA145_AMD
PGA156_X_TI PGA168 PGA169 PGA175 PGA179
PGA68_SQ PGA69 PQFP100R PQFP120 PQFP132
PQFP160 PQFP164 PQFP196 PQFP208_CYP PQFP44
PQFP64_TI PQFP74_NEC PQFP80_TI SOIC48W SOIC56W
SOJ24 SOJ26 SOJ26W SOJ28 SOJ40
SPGA325 TQFP100 TSOP28F_TOS TSOP28R_TOS TSOP32_8
VQFP100 ZIP28 ZIP60_MOT ZIP64_MOT
The package dimensions of all the above symbols are in accordance with the
JEDEC-95 standards. In cases of symbols which were not found in the JEDEC
document, a manufacturer suffix has been added to distinguish them. Hence
the CQFP208_ALT package is from the Altera package data. When JEDEC comes
up with specifications for these packages, the symbols will be updated to
conform to that specification.
- The following new pads have been added.
PGA_SQ SMD110REC19 SMD110REC23 SMD30_57 SMD30_96
SMD30REC14 SMD36REC12 SMD50REC12 SMD50REC19 SMD60REC19
SMD90REC19 SOJ
- All the quad flat packages have been assumed to be used with an L bend
for the pins. The pad sizes for these symbols have been calculated based
on this assumption. The pad sizes for the rest of the new symbols are
in accordance with ANSI/IPC-SM782A recommendations.
- All the PGA symbols have been updated so that it shows the correct NC
drill figure.
- The origin in case of all Surface Mount symbols has been changed to be
at the center of the package. This enables easy mirroring of packages to
the bottom side of the pc-board. The origin in case of PGA pads, has been
fixed at Pin 1.
- The pin row O has been changed to P in case of PGA132.
10-04-93 ldang/pk : Release 8.0 P1
This is the first release of the complete Allegro symbol library.
- The following symbols hve been created to be in accordance with
the JEDEC standard (following JEDEC PUBLICATION No. 95) .
AT_35UX CB298 CB417 DIP10_2 DO14 DO15
DO201AA DO201AB DO201AC DO201AD DO203AA DO203AB
DO204AA DO204AH DO204AP DO204AR DO27A DO34
DO7 GI_AXIAL7B GI_AXIAL9 GI_BR1W HPAC_100
MOT145A MOT17 MOT193 MOT194_01 MOT194_04
MOT211 MOT221A MOT244 MOT303 MOT305A MOT309A_02
MOT309A_03 MOT317 MOT317A MOT332 MOT332A MOT339
MOT357C MOT361A MOT60 MPAK MPAK4 NATL_M
NEC_SP NS_H02A R70 SC59 SC70 SOD57
SOD80 SOD81 SOD87 SOT121 SOT123 SOT143
SPAK TO117 TO127 TO204AD TO204AE TO205AF
TO209AC TO213AA TO218AA TO218AC TO220AA TO220AC
TO225AA TO236 TO236AA TO236AB TO237 TO247AC
TO247AE TO250AA TO251AA TO252AA TO254AA TO48
TO59 TO64 TO66 TO72 TO77 TO78
TO89 TO92VAR TOSH_2_8H1A UNIT_BODY_A
UNIT_BODY_B
- The following allegro shapes represent diodes and transistors which
get fixed to the board, while the anode or the base and the emitter
is on the top of the device ( not in the same plane as that of the
board ). Since Allegro requires pads for all pins on the symbol to
be shown on the same plane, certain pins of these symbols are not
shown. These symbols are to be modified according to the customer's
requirements.
DO203AA DO203AB R70 TO48 TO59 TO64 TO209AC
- The rest of the symbols have been taken from the base Allegro symbol
library.