| .. |
|
01_#20module#20management#20ctrl
|
Replaced (incorrect) yellow side-launch LEDs with one blue one red. Rotated switch SW1. Exported to mtca_interface_board_reocc/top_mib_v3/physical/mib_rev3b_v225.brd
|
2025-03-07 10:54:24 +00:00 |
|
02_#20power
|
Changed R60 to correct 2.5V voltage (was 3.3V with previous value
|
2025-03-07 10:55:37 +00:00 |
|
03_#20sfp
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
04_#20sfp_module
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
05#20trenz#20te0712#20fpga#20modul_arce/sch_1
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
05#20trenz#20te0712#20fpga#20module
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
07_#20backplane#20interface
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
08_#20timing
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
alias_bit/top_cfg_package
|
Adding the cadence files converted by Elgris
|
2023-01-05 14:28:39 +00:00 |
|
alias_vector/top_cfg_package
|
Adding the cadence files converted by Elgris
|
2023-01-05 14:28:39 +00:00 |
|
front_panel_jtag_serial
|
starting work on front panel
|
2025-03-07 11:30:47 +00:00 |
|
glbl/top_cfg_package
|
Pushing files flagged as changed by GIT
|
2025-02-10 15:19:29 +00:00 |
|
mib_tongue2
|
Exporting to PCB after replacing LEDs
|
2025-03-10 10:55:14 +00:00 |
|
top
|
Added LEDs to front_panel_jtag_serial design. Exported to PCB
|
2025-02-13 13:36:51 +00:00 |
|
top_mib_v3
|
Fixed bizzare issue that one of the two side-launch LEDS (blue/red) got given the Ref Des MMC when exported to PCB. Fixed this by editing the RefDes in PCB and then doing physical-import back to schematic. Also re-printed circuit schematic
|
2025-03-10 10:55:14 +00:00 |
